The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Assessment of high-heat-flux thermal management schemes
Abstract
This paper explores the recent research developments in high-heat-flux thermal management. Cooling schemes such as pool boiling, detachable heat sinks, channel flow boiling, microchannel and mini-channel heat sinks, jet-impingement, and sprays, are discussed and compared relative to heat dissipation potential, reliability, and packaging concerns. It is demonstrated that, while different cooling options can be tailored to the specific needs of individual applications, system considerations always play a paramount role in determining the most suitable cooling scheme. It is also shown that extensive fundamental electronic cooling knowledge has been amassed over the past two decades. Yet there is now a growing need for hardware innovations rather than perturbations to those fundamental studies. An example of these innovations is the cooling of military avionics, where research findings from the electronic cooling literature have made possible the development of a new generation of cooling hardware which promise order of magnitude increases in heat dissipation compared to today's cutting edge avionics cooling schemes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
The heat transfer from a hot wall to impinging water drops in the spheroidal state
Wachters, L. H. J., & Westerling, N. A. J. (1966) · Chemical Engineering Science · doi:10.1016/0009-2509(66)85100-x · Cited by 552
High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Bowers, M. B., & Mudawar, I. (1994) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(94)90103-1 · Cited by 483
Self-citationOptimization of Enhanced Surfaces for High Flux Chip Cooling by Pool Boiling
Mudawar, I., & Anderson, T. M. (1993) · Journal of Electronic Packaging · doi:10.1115/1.2909306 · Cited by 119
Self-citation
Cited by
Ebrahimi, K., Jones, G. F., & Fleischer, A. S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.007 · Cited by 779
Nanowires for Enhanced Boiling Heat Transfer
Chen, R., Lu, M.-C., Srinivasan, V., Wang, Z., Cho, H. H., & Majumdar, A. (2009) · Nano Letters · doi:10.1021/nl8026857 · Cited by 699
Review of spray cooling – Part 1: Single-phase and nucleate boiling regimes, and critical heat flux
Liang, G., & Mudawar, I. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.029 · Cited by 609
Self-citationLimits to binary logic switch scaling-a gedanken model
Zhirnov, V. V., Cavin, R. K., Hutchby, J. A., & Bourianoff, G. I. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818324 · Cited by 482
Spray cooling and flash evaporation cooling: The current development and application
Cheng, W.-L., Zhang, W.-W., Chen, H., & Hu, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.014 · Cited by 384
Metadata
- Authors
- Mudawar, I.
- Venue
- IEEE Transactions on Components and Packaging Technologies
- Published
- 2001-06
- Volume
- 24
- Issue
- 2
- Pages
- 122-141
- ISSN
- 1521-3331 (ISSN-L)
- OpenAlex
- W2154768337
- Cited by
- 939
- References
- 4
- FWCI
- 25.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.