Power and life extension of battery-ultracapacitor hybrids
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The performance of a battery-ultracapacitor hybrid power source under pulsed load conditions is analytically described using simplified models. We show that peak power can be greatly enhanced, internal losses can be considerably reduced, and that discharge life of the battery is extended. Greatest benefits are seen when the load pulse rate is higher than the system eigenfrequency and when the pulse duty is small. Actual benefits are substantial; adding a 23 F ultracapacitor bank (3 /spl times/ 7 PC10 ultracapacitors) in parallel with a typical Li-ion battery of 7.2 V and 1.35 A hr capacity can boost the peak power capacity by 5 times and reduce the power loss by 74%, while minimally impacting system volume and weight, for pulsed loads of 5 A, 1 Hz repetition rate, and 10% duty.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Supercapacitors : Scientific Fundamentals and Technological Applications
Conway, B. E. (2013) · CERN Document Server (European Organization for Nuclear Research) · Cited by 5,015
Principles and applications of electrochemical capacitors
Kötz, R., & Carlen, M. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00354-6 · Cited by 4,804
Electrochemical Supercapacitors
Conway, B. E. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3058-6 · Cited by 3,519
Characterization of double-layer capacitors for power electronics applications
Zubieta, L., & Bonert, R. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.821816 · Cited by 750
An electric double-layer capacitor with high capacitance and low resistance
Yoshida, A., Imoto, K., Yoneda, H., & Nishimo, A. (1992) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/33.124204 · Cited by 57
Cited by
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
A review of supercapacitor modeling, estimation, and applications: A control/management perspective
Zhang, L., Hu, X., Wang, Z., Sun, F., & Dorrell, D. G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.283 · Cited by 950
Dynamic lithium-ion battery model for system simulation
Gao, L., Liu, S., & Dougal, R. A. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.803653 · Cited by 794
Self-citationZhou, H., Bhattacharya, T., Tran, D., Siew, T. S. T., & Khambadkone, A. M. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2095040 · Cited by 704
Hybrid energy storage system for microgrids applications: A review
Hajiaghasi, S., Salemnia, A., & Hamzeh, M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.12.017 · Cited by 585
Metadata
- Authors
- Dougal, R. A., Liu, S., & White, R. E.
- Venue
- IEEE Transactions on Components and Packaging Technologies
- Published
- 2002-03
- Volume
- 25
- Issue
- 1
- Pages
- 120-131
- ISSN
- 1521-3331 (ISSN-L)
- OpenAlex
- W2005715530
- Cited by
- 530
- References
- 5
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.