The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Power losses in PWM-VSI inverter using NPT or PT IGBT devices
Abstract
This paper investigates the power losses for two different IGBT technologies (nonpunch through and punch through) for use in PWM-VSI inverters in order to choose the right device technology for a given application. A loss model of the inverter is developed based on experimental determination of the power losses. The loss model is used on two different modulation strategies which are a sine wave with a third harmonic added and a 60/spl deg/-PWM modulation where only two inverter legs are active at the same time. The two IGBT technologies are characterized on an advanced measurement system which is described. The total power losses in the inverter are estimated by simulation at different conditions and it is concluded that the nonpunch through (NPT) technology is most useful for higher switching frequencies, while the punch through (PT) technology is especially useful at lower switching frequencies and high load currents. It is also concluded that the 60/spl deg/-PWM modulation has the lowest power losses and the power losses are almost independent of phase angle cos(/spl phi/) for normal motor operation.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Use of Harmonic Distortion to Increase the Output Voltage of a Three-Phase PWM Inverter
Houldsworth, J. A., & Grant, D. A. (1984) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1984.4504587 · Cited by 388
Cited by
Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters
Rohner, S., Bernet, S., Hiller, M., & Sommer, R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031187 · Cited by 934
Teichmann, R., & Bernet, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.847285 · Cited by 578
Fazel, S. S., Bernet, S., Krug, D., & Jalili, K. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900476 · Cited by 356
Wind Speed Estimation Based Sensorless Output Maximization Control for a Wind Turbine Driving a DFIG
Qiao, W., Zhou, W., Aller, J. M., & Harley, R. G. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921185 · Cited by 354
Impact of SiC Devices on Hybrid Electric and Plug-In Hybrid Electric Vehicles
Zhang, H., Tolbert, L. M., & Ozpineci, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2102734 · Cited by 255
Metadata
- Authors
- Blaabjerg, F., Jaeger, U., & Munk-Nielsen, S.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1995-05
- Volume
- 10
- Issue
- 3
- Pages
- 358-367
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2113748537
- Cited by
- 285
- References
- 1
- FWCI
- 0.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.