The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Inverter output voltage synthesis using novel dead time compensation
Abstract
In this paper, a novel dead time compensation method is presented that produces inverter output voltages equal to reference voltages. An experimental result is also presented to demonstrate the validity of the proposed method. It shows that the compensation of the dead time is possible up to a sub-microsecond range. Also, the reference voltage can be used as a feedback value, which is essential for sensorless vector control and flux estimation. The method is based on space vector pulsewidth modulation (PWM) strategy and it can be carried out automatically by an inverter controller for initial setup without any extra hardware.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis and realization of a pulsewidth modulator based on voltage space vectors
van der Broeck, H. W., Skudelny, H.-C., & Stanke, G. V. (1988) · IEEE Transactions on Industry Applications · doi:10.1109/28.87265 · Cited by 1,717
Inverter nonlinearities and discrete-time vector current control
Sepe, R. B., & Lang, J. H. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.273622 · Cited by 103
Cited by
Sensorless full-digital PMSM drive with EKF estimation of speed and rotor position
Bolognani, S., Oboe, R., & Zigliotto, M. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744410 · Cited by 610
Holtz, J., & Quan, J. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800779 · Cited by 376
Dead Time Compensation Method for Voltage-Fed PWM Inverter
Hwang, S.-H., & Kim, J.-M. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2031811 · Cited by 332
Holtz, J., & Quan, J. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813726 · Cited by 313
Identification of Machine Parameters of a Synchronous Motor
Rahman, K. M., & Hiti, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844379 · Cited by 277
Rafaq, M. S., & Jung, J.-W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2944413 · Cited by 266
Rashed, M., MacConnell, P. F. A., Stronach, A. F., & Acarnley, P. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895136 · Cited by 258
Ding, X., Du, M., Duan, C., Guo, H., Xiong, R., Xu, J., Cheng, J., & Chi kwong Luk, P. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2765670 · Cited by 138
Metadata
- Authors
- Choi, J.-W., & Sul, S.-K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1996-03
- Volume
- 11
- Issue
- 2
- Pages
- 221-227
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2142785957
- Cited by
- 509
- References
- 2
- FWCI
- 3.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.