The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The unified power quality conditioner: the integration of series- and shunt-active filters
Open accessAbstract
This paper deals with unified power quality conditioners (UPQCs), which aim at the integration of series-active and shunt-active power filters. The main purpose of a UPQC is to compensate for voltage flicker/imbalance, reactive power, negative-sequence current and harmonics. In other words, the UPQC has the capability of improving power quality at the point of installation on power distribution systems or industrial power systems. This paper discusses the control strategy of the UPQC, with a focus on the how of instantaneous active and reactive powers inside the UPQC. Experimental results obtained from a laboratory model of 20 kVA, along with a theoretical analysis, are shown to verify the viability and effectiveness of the UPQC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Akagi, H., Kanazawa, Y., & Nabae, A. (1984) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1984.4504460 · Cited by 3,377
Self-citationNew trends in active filters for power conditioning
Akagi, H. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.556633 · Cited by 1,663
Self-citationSynchronous frame based controller implementation for a hybrid series active filter system
Bhattacharya, S., & Divan, D. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530625 · Cited by 344
Cited by
Guerrero, J. M., Chandorkar, M., Lee, T.-L., & Loh, P. C. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194969 · Cited by 1,976
Proportional-resonant controllers and filters for grid-connected voltage-source converters
Teodorescu, R., Blaabjerg, F., Liserre, M., & Loh, P. C. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20060008 · Cited by 1,646
Guerrero, J. M., Loh, P. C., Lee, T.-L., & Chandorkar, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196889 · Cited by 965
Enhancing Electric Power Quality Using UPQC: A Comprehensive Overview
Khadkikar, V. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2172001 · Cited by 725
Distributed Intelligent Energy Management System for a Single-Phase High-Frequency AC Microgrid
Chakraborty, S., Weiss, M. D., & Simoes, M. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888766 · Cited by 413
Metadata
- Authors
- Fujita, H., & Akagi, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1998-03
- Volume
- 13
- Issue
- 2
- Pages
- 315-322
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2142449608
- Cited by
- 1,031
- References
- 3
- FWCI
- 7.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.