The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Conducted electromagnetic emissions in induction motor drive systems. I. Time domain analysis and identification of dominant modes
Abstract
Stray components distributed in a pulsewidth modulation (PWM) drive system form parts of resonant circuits which can be excited to produce radio frequency (RF) noise driven by the pulsed switching action of the power devices. The dynamic response of such circuits is complex. It is essential to identify the dominant oscillation modes in the system so that electromagnetic interference (EMI) reduction techniques can be effectively implemented. This paper (Part I) investigates the mechanisms of conducted EMI emissions associated with a typical PWM inverter induction motor drive system. A numerical model, which includes the high-frequency effects within the machine, is established to evaluate the emissions in the time domain. The dominant high-frequency current paths are identified, and this allows the oscillation frequencies to be predicted from knowledge of the component values. The analysis is confirmed using laboratory measurements. Simplified frequency domain methods for direct calculation of the emission spectra based on the dominant high-frequency current paths are discussed in Part II.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Improvements in EMC performance of inverter-fed motor drives
Zhong, E., & Lipo, T. A. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475694 · Cited by 245
Cited by
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Self-citation
Metadata
- Authors
- Ran, L., Gokani, S., Clare, J., Bradley, K. J., & Christopoulos, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1998-07
- Volume
- 13
- Issue
- 4
- Pages
- 757-767
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2156258512
- Cited by
- 267
- References
- 3
- FWCI
- 3.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.