The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
A boost DC-AC converter: analysis, design, and experimentation
Abstract
This paper proposes a new voltage source inverter (VSI) referred to as a boost inverter or boost DC-AC converter. The main attribute of the new inverter topology is the fact that it generates an AC output voltage larger than the DC input one, depending on the instantaneous duty cycle. This property is not found in the classical VSI, which produces an AC output instantaneous voltage always lower than the DC input one. For the purpose of optimizing the boost inverter dynamics, while ensuring correct operation in any working condition, a sliding mode controller is proposed. The main advantage of the sliding mode control over the classical control schemes is its robustness for plant parameter variations, which leads to invariant dynamics and steady-state response in the ideal case. Operation, analysis, control strategy, and experimental results are included in this paper. The new inverter is intended to be used in uninterruptible power supply (UPS) and AC driver systems design whenever an AC voltage larger than the DC link voltage is needed, with no need of a second power conversion stage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
General-purpose sliding-mode controller for DC/DC converter applications
Mattavelli, P., Rossetto, L., Spiazzi, G., & Tenti, P. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1993.471989 · Cited by 262
Performance optimization of Cuk converters by sliding-mode control
Malesani, L., Rossetto, L., Spiazzi, G., & Tenti, P. (2003) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1992.228383 · Cited by 121
A boost DC-AC converter: operation, analysis, control and experimentation
Caceres, R., & Barbi, I. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1995.483467 · Cited by 118
Self-citationA sliding mode controller in single phase voltage source inverters
Pinheiro, H., Martins, A. S., & Pinheiro, J. R. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1994.397810 · Cited by 64
Cited by
Overview of Control and Grid Synchronization for Distributed Power Generation Systems
Blaabjerg, F., Teodorescu, R., Liserre, M., & Timbus, A. V. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.881997 · Cited by 5,220
Review and Comparison of Step-Up Transformerless Topologies for Photovoltaic AC-Module Application
Meneses, D., Blaabjerg, F., García, Ó., & Cobos, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227820 · Cited by 533
Developments of electric cars and fuel cell hydrogen electric cars
Wilberforce, T., El-Hassan, Z., Khatib, F. N., Al Makky, A., Baroutaji, A., Carton, J. G., & Olabi, A. G. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.054 · Cited by 478
Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies
Das, H. S., Tan, C. W., & Yatim, A. H. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.056 · Cited by 463
A Model Predictive Control System for a Hybrid Battery-Ultracapacitor Power Source
Hredzak, B., Agelidis, V. G., & Jang, M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2262003 · Cited by 449
Metadata
- Authors
- Caceres, R. O., & Barbi, I.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1999-01
- Volume
- 14
- Issue
- 1
- Pages
- 134-141
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2145365641
- Cited by
- 736
- References
- 4
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.