The DOI matches its Crossref record.
Low stray inductance bus bar design and construction for good EMC performance in power electronic circuits
Abstract
Ten years after the publication of the EC Directive 89/336 on electromagnetic compatibility, the impact of this directive on design and lay-out of modern electrical and electronic equipment can be observed. Many research and development studies have proposed and evaluated detailed improvements in the area of component design, component selection, circuit lay-out, shielding and active and passive filtering. New and innovative solutions to minimize noise, especially common mode conducted electromagnetic interference (EMI), in power electronic circuits continue to be developed. In this paper, the authors investigate to what extent EMI caused by power electronic devices in hard switching inverter topologies can be minimized using ultra-low inductive planar busbars. The concept followed in this study is to tackle EMI directly at the source where most EMI is generated; in other words, to reduce the parasitic magnetic energy stored in the inverter DC link to reduce high voltage spikes during switching. A planar busbar was built, tested and analyzed. Measurements show the validity of the theoretical, but simple, design procedure for planar busbars in power converters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview
Wang, H., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2308357 · Cited by 1,384
Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles
Husain, I., Ozpineci, B., Islam, M. S., Gurpinar, E., Su, G.-J., Yu, W., Chowdhury, S., Xue, L., Rahman, D., & Sahu, R. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3046112 · Cited by 608
Noise and vibration suppression in hybrid electric vehicles: State of the art and challenges
Qin, Y., Tang, X., Jia, T., Duan, Z., Zhang, J., Li, Y., & Zheng, L. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109782 · Cited by 272
Xu, W., Yu, R. Y., Guo, Z., & Huang, A. Q. (2020) · 2020 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235903 · Cited by 25
Metadata
- Authors
- Caponet, M. C., Profumo, F., De Doncker, R. W., & Tenconi, A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2002-03
- Volume
- 17
- Issue
- 2
- Pages
- 225-231
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2128467083
- Cited by
- 231
- References
- 0
- FWCI
- 6.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.