The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Low-stiffness silicon cantilevers with integrated heaters and piezoresistive sensors for high-density AFM thermomechanical data storage
Abstract
Single-crystal silicon cantilevers 1 /spl mu/m thick have been demonstrated for use in high-density atomic-force microscopy (AFM) thermomechanical data storage. Cantilevers with integrated piezoresistive sensors were fabricated with measured sensitivities /spl Delta/R/R up to 7.5/spl times/10/sup -7/ per /spl Aring/ in close agreement with theoretical predictions. Separate cantilevers with integrated resistive heaters were fabricated using the same basic process. Electrical and thermal measurements on these heating devices produced results consistent with ANSYS simulations. Geometric variants of the cantilever were also tested in order to study the dependence of the thermal time constant on device parameters. Depending on the design, time constants as low as 1 /spl mu/s were achieved. A thermodynamic model was developed based on the cantilevers geometry and material properties, and the model was shown to predict device behavior accurately. A comprehensive understanding of cantilever functionality enabled us to optimize the cantilever for high-speed thermomechanical recording.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Pure and Impure Silicon, Silicon Carbide, and Diamond
Slack, G. A. (1964) · Journal of Applied Physics · doi:10.1063/1.1713251 · Cited by 695
Cited by
Review: Semiconductor Piezoresistance for Microsystems
Barlian, A. A., Park, W.-T., Mallon, J. R., Rastegar, A. J., & Pruitt, B. L. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2013612 · Cited by 949
Metadata
- Authors
- Chui, B. W., Stowe, T. D., Ju, Y. S., Goodson, K. E., Kenny, T. W., Mamin, H. J., Terris, B. D., Ried, R. P., & Rugar, D.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 1998-03
- Volume
- 7
- Issue
- 1
- Pages
- 69-78
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2100502452
- Cited by
- 172
- References
- 1
- FWCI
- 10.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low-stiffness silicon cantilevers with integrated heaters and piezoresistive sensors for high-density AFM thermomechanical data storage. https://app.cochat.ai/papers/10.1109/84.661386
- The paper
- Chui, B. W., Stowe, T. D., Ju, Y. S., Goodson, K. E., Kenny, T. W., Mamin, H. J., Terris, B. D., Ried, R. P., & Rugar, D. (1998). Low-stiffness silicon cantilevers with integrated heaters and piezoresistive sensors for high-density AFM thermomechanical data storage. Journal of Microelectromechanical Systems. https://doi.org/10.1109/84.661386
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.