Design and batch fabrication of probes for sub-100 nm scanning thermal microscopy
The DOI matches its Crossref record.
Abstract
A batch fabrication process has been developed for making cantilever probes for scanning thermal microscopy (SThM) with spatial resolution in the sub-100 nm range. A heat transfer model was developed to optimize the thermal design of the probes. Low thermal conductivity silicon dioxide and silicon nitride were chosen for fabricating the probe tips and cantilevers, respectively, in order to minimize heat loss from the sample to the probe and to improve temperature measurement accuracy and spatial resolution. An etch process was developed for making silicon dioxide tips with tip radius as small as 20 nm. A thin film thermocouple junction was fabricated at the tip end with a junction height that could be controlled in the range of 100-600 nm. These thermal probes have been used extensively for thermal imaging of micro- and nano-electronic devices with a spatial resolution of 50 nm. This paper presents measurement results of the steady state and dynamic temperature responses of the thermal probes and examines the wear characteristics of the probes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Cahill, D. G., Ford, W. K., Goodson, K. E., Mahan, G. D., Majumdar, A., Maris, H. J., Merlin, R., & Phillpot, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1524305 · Cited by 2,825
Self-citationBrites, C. D. S., Lima, P. P., Silva, N. J. O., Millán, A., Amaral, V. S., Palacio, F., & Carlos, L. D. (2012) · Nanoscale · doi:10.1039/c2nr30663h · Cited by 1,592
Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures
Cahill, D. G., Goodson, K., & Majumdar, A. (2002) · Journal of Heat Transfer · doi:10.1115/1.1454111 · Cited by 611
Self-citationScanning thermal microscopy: A review
Gomès, S., Assy, A., & Chapuis, P.-O. (2015) · physica status solidi (a) · doi:10.1002/pssa.201400360 · Cited by 281
Advanced Thermoelectric Materials for Flexible Cooling Application
Ding, J., Zhao, W., Jin, W., Di, C., & Zhu, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010695 · Cited by 123
Metadata
- Authors
- Shi, L., Kwon, O., Miner, A. C., & Majumdar, A.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2001
- Volume
- 10
- Issue
- 3
- Pages
- 370-378
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2098049879
- Cited by
- 114
- References
- 0
- FWCI
- 9.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.