The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Performance and gain and phase margins of well-known PID tuning formulas
Abstract
The performance and robustness of well-known PID formulas for process with deadtime to time constant ratio between 0.1 and 1 are discussed in this paper. The Ziegler-Nichols, Cohen-Coon, and tuning formulas that optimize for load disturbance response (integral absolute error, integral squared error, and integral time-weighted absolute error) give gain margins of about 1.5. The phase margins increase from about 30 to 60/spl deg/ as the process deadtime to time constant ratio increases from 0.1 to 1. Tuning formulas that optimize setpoint response give gain margins of about two and phase margins of about 65/spl deg/. These formulas mostly make use of the proportional-integral derivative (PID) controller zeros to cancel the process poles. Approximate analytical formulas to compute gain and phase margins of PID control systems are also derived in this paper to facilitate online computation which would be particularly useful for implementing adaptive control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scheduling algorithms for multiprogramming in a hard-real-time environment
Liu, C. L., & Layland, J. W. (1973) · Journal of the ACM · doi:10.1145/321738.321743 · Cited by 8,433
Optimum Settings for Automatic Controllers
Ziegler, J. G., & Nichols, N. B. (1942) · Journal of Fluids Engineering · doi:10.1115/1.4019264 · Cited by 5,212
Virk, G. S. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85041-b · Cited by 3,216
Morari, M., & Zafiriou, E. (1988) · International Linear Collider · Cited by 2,735
Optimum Settings for Automatic Controllers
Ziegler, J. G., & Nichols, N. B. (1993) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2899060 · Cited by 2,460
(1990) · Choice Reviews Online · doi:10.5860/choice.27-3903 · Cited by 835
Automatic tuning and adaptation for PID controllers - a survey
Åström, K. J., Hägglund, T. J., Hang, C. C., & Ho, W. K. (1993) · Control Engineering Practice · doi:10.1016/0967-0661(93)91394-c · Cited by 686
Self-citationAutomatic tuning of optimum PID controllers
Zhuang, M., & Atherton, D. P. (1993) · IEE Proceedings D Control Theory and Applications · doi:10.1049/ip-d.1993.0030 · Cited by 671
Chemical Process Control: An Introduction to Theory and Practice
Stephanopoulos, G. (1983) · Prentice Hall eBooks · Cited by 644
Tuning of PID controllers based on gain and phase margin specifications
Ho, W. K., Hang, C. C., & Cao, L. S. (1995) · Automatica · doi:10.1016/0005-1098(94)00130-b · Cited by 584
Self-citation
Cited by
A review of PID control, tuning methods and applications
Borase, R. P., Maghade, D. K., Sondkar, S. Y., & Pawar, S. N. (2021) · International Journal of Dynamics and Control · doi:10.1007/s40435-020-00665-4 · Cited by 1,036
Metaheuristic algorithms for PID controller parameters tuning: review, approaches and open problems
Joseph, S. B., Dada, E. G., Abidemi, A., Oyewola, D. O., & Khammas, B. M. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09399 · Cited by 458
Metadata
- Authors
- Ho, W. K., Gan, O. P., Tay, E. B., & Ang, E. L.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 1996-07
- Volume
- 4
- Issue
- 4
- Pages
- 473-477
- ISSN
- 1063-6536 (ISSN-L)
- OpenAlex
- W2147104846
- Cited by
- 283
- References
- 16
- FWCI
- 17.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Performance and gain and phase margins of well-known PID tuning formulas. https://app.cochat.ai/papers/10.1109/87.508897
- The paper
- Ho, W. K., Gan, O. P., Tay, E. B., & Ang, E. L. (1996). Performance and gain and phase margins of well-known PID tuning formulas. IEEE Transactions on Control Systems Technology. https://doi.org/10.1109/87.508897
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.