The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Embedded power supply for low-power DSP
Abstract
The use of dynamically adjustable power supplies as a method to lower power dissipation in DSP is analyzed. Power can be reduced substantially without sacrificing performance in fixed-throughput applications by slowing the clock and lowering supply voltage instead of idling when computational workload varies. This can yield a typical power savings of 30-50%. If latency can be tolerated, buffering data and averaging processing rate can yield power reductions of an order of magnitude in some applications. Continuous variation of the supply voltage can be approximated by very crude quantization and dithering: a four-level controller is sufficient to get within a few percent of the optimal power savings. Significant savings are possible only if the voltage can be changed on the same time scale as the variations in workload. A chip has been fabricated and tested to verify the closed-loop functionality of a variable voltage system. The controller takes only 0.4 mm/sup 2/ and draws a maximum of 1 mW at 2 V with a 40 MHz clock. The control framework developed is applicable to generic DSP applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elements of Information Theory
Cover, T. M., & Thomas, J. A. (2001) · Wiley eBooks · doi:10.1002/0471200611 · Cited by 36,808
Chandrakasan, A. P., Sheng, S., & Brodersen, R. W. (2015) · Cited by 2,232
Self-citationChandrakasan, A. P., Sheng, S., & Brodersen, R. W. (1992) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.126534 · Cited by 2,156
Self-citationFundamentals of Applied Probability Theory
Drake, A. W. (1967) · Cited by 348
A low-voltage CMOS DC-DC converter for a portable battery-operated system
Stratakos, A. J., Sanders, S. R., & Brodersen, R. W. (2002) · Proceedings of 1994 Power Electronics Specialist Conference - PESC'94 · doi:10.1109/pesc.1994.349672 · Cited by 228
A low power switching power supply for self-clocked systems
Wei, G.-Y., & Horowitz, M. (1996) · doi:10.5555/252493.252627 · Cited by 107
A low power switching power supply for self-clocked systems
Wei, G.-Y., & Horowitz, M. (2002) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1109/lpe.1996.547531 · Cited by 49
Cited by
A survey of design techniques for system-level dynamic power management
Benini, L., Bogliolo, A., & De Micheli, G. (2000) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.845896 · Cited by 1,241
Voltage scheduling problem for dynamically variable voltage processors
Ishihara, T., & Yasuura, H. (1998) · Proceedings of the 1998 international symposium on Low power electronics and design - ISLPED '98 · doi:10.1145/280756.280894 · Cited by 803
Dynamic power management in wireless sensor networks
Sinha, A., & Chandrakasan, A. (2001) · IEEE Design & Test of Computers · doi:10.1109/54.914626 · Cited by 711
Self-citationSelf-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
Self-citationSystem-level power optimization: techniques and tools
Benini, L., & Micheli, G. D. (2000) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/335043.335044 · Cited by 405
Design considerations for distributed microsensor systems
Chandrakasan, A., Amirtharajah, R., Cho, S., Goodman, J., Konduri, G., Kulik, J., Rabiner, W., & Wang, A. (2003) · Proceedings of the IEEE 1999 Custom Integrated Circuits Conference (Cat. No.99CH36327) · doi:10.1109/cicc.1999.777291 · Cited by 339
Self-citationA survey on power control issues in wireless sensor networks
Pantazis, N. A., & Vergados, D. D. (2007) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2007.4444752 · Cited by 287
Ultralow-Power Electronics for Biomedical Applications
Chandrakasan, A. P., Verma, N., & Daly, D. C. (2008) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.10.061807.160547 · Cited by 285
Self-citationSoft digital signal processing
Hegde, R., & Shanbhag, N. R. (2001) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.974895 · Cited by 276
Metadata
- Authors
- Gutnik, V., & Chandrakasan, A. P.
- Venue
- IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Published
- 1997-12
- Volume
- 5
- Issue
- 4
- Pages
- 425-435
- ISSN
- 1063-8210 (ISSN-L)
- 1557-9999
- OpenAlex
- W2158443804
- Cited by
- 260
- References
- 7
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.