The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Sensor Fault Classification Based on Support Vector Machine and Statistical Time-Domain Features
Open accessAbstract
This paper deals with the problem of fault detection and diagnosis in sensors considering erratic, drift, hard-over, spike, and stuck faults. The data set containing samples of the above mentioned fault signals was acquired as follows: normal data signals were obtained from a temperature-to-voltage converter by using an Arduino Uno microcontroller board and MATLAB. Then, faults were simulated in normal data to get 100 samples of each fault, in which one sample is composed of 1000 data elements. A support vector machine (SVM) was used for data classification in a one-versus-rest manner. The statistical time-domain features, extracted from a sample, were used as a single observation for training and testing SVM. The number of features varied from 5 to 10 to examine the effect on accuracy of SVM. Three different kernel functions used to train SVM include linear, polynomial, and radial-basis function kernels. The fault occurrence event in fault samples was chosen randomly in some cases to replicate a practical scenario in industrial systems. The results show that an increase in the number of features from 5 to 10 hardly increases the total accuracy of the classifier. However, using ten features gives the highest accuracy for fault classification in an SVM. An increase in the number of training samples from 40 to 60 caused an overfitting problem. The k-fold cross-validation technique was adopted to overcome this issue. The increase in number of data elements per sample to 2500 increases the efficiency of the classifier. However, an increase in the number of training samples to 400 reduces the capability of SVM to classify stuck fault. The receiver operating characteristics curve comparison shows the efficiency of SVM over a neural network.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
An introduction to ROC analysis
Fawcett, T. (2006) · Pattern Recognition Letters · doi:10.1016/j.patrec.2005.10.010 · Cited by 21,879
A Tutorial on Support Vector Machines for Pattern Recognition
Burges, C. J. C. (1998) · Data Mining and Knowledge Discovery · doi:10.1023/a:1009715923555 · Cited by 16,429
An overview of statistical learning theory
Vapnik, V. N. (1999) · IEEE Transactions on Neural Networks · doi:10.1109/72.788640 · Cited by 6,266
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Neural networks — A comprehensive foundation
Wilusz, T. (1995) · Neurocomputing · doi:10.1016/0925-2312(95)90026-8 · Cited by 2,868
Support Vector Machines for Classification and Regression
Gunn, S. R. (1998) · Cited by 2,820
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Multiclass Support Vector Machines
(2005) · Advances in Pattern Recognition · doi:10.1007/1-84628-219-5_3 · Cited by 1,067
Support Vector Machines for classification and regression
Brereton, R. G., & Lloyd, G. R. (2010) · The Analyst · doi:10.1039/b918972f · Cited by 1,036
Comparison of algorithms that select features for pattern classifiers
Kudo, M., & Sklansky, J. (2000) · Pattern Recognition · doi:10.1016/s0031-3203(99)00041-2 · Cited by 905
Support vector machines for multi-class pattern recognition.
Weston, J., & Watkins, C. (1999) · Cited by 796
SAMANTA, B., & AL-BALUSHI, K. R. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1462 · Cited by 760
Identification of faulty sensors using principal component analysis
Dunia, R., Qin, S. J., Edgar, T. F., & McAvoy, T. J. (1996) · AIChE Journal · doi:10.1002/aic.690421011 · Cited by 526
Samanta, B. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00020-7 · Cited by 517
Multiclass Support Vector Machines
Abe, S. (2010) · Advances in Pattern Recognition · doi:10.1007/978-1-84996-098-4_3 · Cited by 512
Wang, Y., Xiang, J., Markert, R., & Liang, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.039 · Cited by 504
Tian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Heterogeneous Feature Models and Feature Selection Applied to Bearing Fault Diagnosis
Rauber, T. W., de Assis Boldt, F., & Varejao, F. M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327589 · Cited by 365
Detection, identification, and quantification of sensor fault in a sensor network
Kullaa, J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.007 · Cited by 163
Fault diagnosis of rolling element bearing using time-domain features and neural networks
Sreejith, B., Verma, A. K., & Srividya, A. (2008) · IEEE International Conference on Industrial and Information Systems (ICIIS) · doi:10.1109/iciinfs.2008.4798444 · Cited by 142
A survey on feature extraction for pattern recognition
Ding, S., Zhu, H. G., Jia, W., & Su, C. (2011) · Artificial Intelligence Review · doi:10.1007/s10462-011-9225-y · Cited by 128
Yu, Y., Li, W., Sheng, D., et al. (2015) · Measurement · doi:10.1016/j.measurement.2015.03.003 · Cited by 81
Support Vector Machine based fault detection & classification in smart grids
Shahid, N., Aleem, S. A., Naqvi, I. H., et al. (2012) · IEEE Globecom Workshops (GC Wkshps) · doi:10.1109/glocomw.2012.6477812 · Cited by 47
Fault detection, isolation, and diagnosis of self-validating multifunctional sensors
Yang, J., Chen, Y., Zhang, L., et al. (2016) · Review of Scientific Instruments · doi:10.1063/1.4954184 · Cited by 25
Support vector machines: A distance-based approach to multi-class classification
Aoudi, W., & Barbar, A. M. (2016) · IEEE International Multidisciplinary Conference on Engineering Technology (IMCET) · doi:10.1109/imcet.2016.7777430 · Cited by 12
Zheng, G., & Craven, R. P. M. (2011) · IEEE SoutheastCon · doi:10.1109/secon.2011.5752908 · Cited by 11
Cited by
Sensor-based and vision-based human activity recognition: A comprehensive survey
Minh Dang, L., Min, K., Wang, H., Jalil Piran, M., Hee Lee, C., & Moon, H. (2020) · Pattern Recognition · doi:10.1016/j.patcog.2020.107561 · Cited by 730
A Data-Driven Design for Fault Detection of Wind Turbines Using Random Forests and XGboost
Zhang, D., Qian, L., Mao, B., Huang, C., Huang, B., & Si, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2818678 · Cited by 583
Toward a Lightweight Intrusion Detection System for the Internet of Things
Jan, S. U., Ahmed, S., Shakhov, V., & Koo, I. (2019) · IEEE Access · doi:10.1109/access.2019.2907965 · Cited by 317
Self-citationChen, Z., Liang, D., Jia, S., Yang, L., & Yang, S. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3255249 · Cited by 72
Biddle, L., & Fallah, S. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00138-0 · Cited by 69
Metadata
- Authors
- Jan, S. U., Lee, Y.-D., Shin, J., & Koo, I.
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 8682-8690
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2614556125
- Cited by
- 291
- References
- 28
- FWCI
- 13.95
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.