A Novel Deeper One-Dimensional CNN With Residual Learning for Fault Diagnosis of Wheelset Bearings in High-Speed Trains
Open accessThe DOI matches its Crossref record; 34 of the 37 references it cites were found in a registry or an index.
Abstract
The health condition of a wheelset bearing, the key component of a railway bogie, has a considerable impact on the safety of a train. Traditional bearing fault diagnosis techniques generally extract signals manually and then diagnose the bearing health conditions through the classifier. However, high-speed trains (HSTs) are usually faced with variable loads, variable speeds, and strong environmental noise, which pose a huge challenge to the application of the traditional bearing fault diagnosis methods in wheelset bearing fault diagnosis. Therefore, this paper proposes a 1D residual block, and based on the block, a novel deeper 1D convolutional neural network (Der-1DCNN) is proposed. The framework includes the idea of residual learning and can effectively learn high-level and abstract features while effectively alleviating the problem of training difficulty and the performance degradation of a deeper network. Additionally, for the first time, we fully use the wide convolution kernel and dropout technology to improve the model's ability to learn low-frequency signal features related to the fault components and to enhance the network's generalization performance. By constructing a deep residual learning network, Der-1DCNN can adaptively learn the deep fault features of the original vibration signal. This method not only achieves very high diagnostic accuracy for the fault diagnosis task of wheelset bearings in HSTs under strong noise environment, but also its performance is quite superior when the train's working load changes without any domain adaptation algorithm processing. The proposed Der-1DCNN is evaluated on the dataset of the multi-operating conditions of the wheelset bearings of HSTs. Experiments show that this method shows a better diagnostic performance compared with the state-of-the-art deep learning methods of bearing fault diagnosis, which proves the method's effectiveness and superiority.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805 · cited 1×
“A convolutional neural network (CNN) [12] is a powerful deep learning method that has been successfully applied in various fields, such as computer vision [13], speech recognition [14], natural language processing [15] and one-dimensional (1D) signal processing [16].”
Method(2014) · Cited by 33,419
(2008) · Journal of Machine Learning Research · Cited by 33,051
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
Convolutional Neural Networks for Sentence Classification
Kim, Y. (2014) · Proceedings of the 2014 Conference on Empirical Methods in Natural Language Processing (EMNLP) · doi:10.3115/v1/d14-1181 · Cited by 14,831
(2010) · International Conference on Machine Learning · Cited by 13,995
Research works printed but not linked: 5
- Yang, 2006, A roller hearing fault diagnosis method baesd on EMD energy entropy and ANN, J. Sound Vib., 294, 269
- Wang, 2015, Application of EEMD-based resonance demodulation technology in train bearing fault diagnosis, Modern Electron. Technol., 38, 24
- Pang, 2015, Faults recognition of high-speed train bogie based on deep learning, J. Railway Sci. Eng., 12, 1283
- Lin, Network in network, Comput. Sci.
- Goodfellow, 2016, Deep Learning
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
A systematic review of deep transfer learning for machinery fault diagnosis
Li, C., Zhang, S., Qin, Y., & Estupinan, E. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.04.045 · Cited by 472
A New Intelligent Bearing Fault Diagnosis Method Using SDP Representation and SE-CNN
Wang, H., Xu, J., Yan, R., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2956332 · Cited by 353
Self-citationPeng, D., Wang, H., Liu, Z., Zhang, W., Zuo, M. J., & Chen, J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967557 · Cited by 350
Self-citationDeep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
Convolutional neural network based bearing fault diagnosis of rotating machine using thermal images
Choudhary, A., Mian, T., & Fatima, S. (2021) · Measurement · doi:10.1016/j.measurement.2021.109196 · Cited by 292
Multi-Sensor data fusion in intelligent fault diagnosis of rotating machines: A comprehensive review
Kibrete, F., Engida Woldemichael, D., & Shimels Gebremedhen, H. (2024) · Measurement · doi:10.1016/j.measurement.2024.114658 · Cited by 270
A Review on Deep Learning Applications in Prognostics and Health Management
Zhang, L., Lin, J., Liu, B., Zhang, Z., Yan, X., & Wei, M. (2019) · IEEE Access · doi:10.1109/access.2019.2950985 · Cited by 232
A hybrid attention improved ResNet based fault diagnosis method of wind turbines gearbox
Zhang, K., Tang, B., Deng, L., & Liu, X. (2021) · Measurement · doi:10.1016/j.measurement.2021.109491 · Cited by 211
A Review of Data-Driven Machinery Fault Diagnosis Using Machine Learning Algorithms
Cen, J., Yang, Z., Liu, X., Xiong, J., & Chen, H. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00498-9 · Cited by 198
Challenges and Opportunities of AI-Enabled Monitoring, Diagnosis & Prognosis: A Review
Zhao, Z., Wu, J., Li, T., Sun, C., Yan, R., & Chen, X. (2021) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-021-00570-7 · Cited by 188
Convolutional Neural Network in Intelligent Fault Diagnosis Toward Rotatory Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2020.2992692 · Cited by 159
Multitask Learning Based on Lightweight 1DCNN for Fault Diagnosis of Wheelset Bearings
Liu, Z., Wang, H., Liu, J., Qin, Y., & Peng, D. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3017900 · Cited by 181
Self-citationYang, B., Xu, S., Lei, Y., Lee, C.-G., Stewart, E., & Roberts, C. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108095 · Cited by 142
Gearbox fault diagnosis based on Multi-Scale deep residual learning and stacked LSTM model
Ravikumar, K. N., Yadav, A., Kumar, H., Gangadharan, K. V., & Narasimhadhan, A. V. (2021) · Measurement · doi:10.1016/j.measurement.2021.110099 · Cited by 138
Signal Status Recognition Based on 1DCNN and Its Feature Extraction Mechanism Analysis
Huang, S., Tang, J., Dai, J., & Wang, Y. (2019) · Sensors · doi:10.3390/s19092018 · Cited by 137
Fault Diagnosis of High-Speed Train Bogie Based on the Improved-CEEMDAN and 1-D CNN Algorithms
Huang, D., Li, S., Qin, N., & Zhang, Y. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3047922 · Cited by 140
Yang, H., Meng, C., & Wang, C. (2020) · IEEE Access · doi:10.1109/access.2020.2968744 · Cited by 121
Fault diagnosis and self-healing for smart manufacturing: a review
Aldrini, J., Chihi, I., & Sidhom, L. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02165-6 · Cited by 162
Jiang, G., Wang, J., Wang, L., Xie, P., Li, Y., & Li, X. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.06.015 · Cited by 118
Signal-Based Intelligent Hydraulic Fault Diagnosis Methods: Review and Prospects
Dai, J., Tang, J., Huang, S., & Wang, Y. (2019) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-019-0388-9 · Cited by 117
Yang, B., Lee, C.-G., Lei, Y., Li, N., & Lü, N. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107618 · Cited by 106
Bearing Remaining Useful Life Prediction Based on Regression Shapalet and Graph Neural Network
Yang, X., Zheng, Y., Zhang, Y., Wong, D. S., & Yang, W. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3151169 · Cited by 101
Multivariate Abnormal Detection for Industrial Control Systems Using 1D CNN and GRU
Xie, X., Wang, B., Wan, T., & Tang, W. (2020) · IEEE Access · doi:10.1109/access.2020.2993335 · Cited by 91
Han, H., Wang, H., Liu, Z., & Wang, J. (2021) · ISA Transactions · doi:10.1016/j.isatra.2021.04.022 · Cited by 90
Self-citationKnowledge-informed deep networks for robust fault diagnosis of rolling bearings
Su, Y., Shi, L., Zhou, K., Bai, G., & Wang, Z. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109863 · Cited by 93
A Survey on Fault Diagnosis Approaches for Rolling Bearings of Railway Vehicles
Yan, G., Jiang, C., Bai, Y. D., Yu, C., & Yu, C. (2022) · Processes · doi:10.3390/pr10040724 · Cited by 87
Zhao, X., Jia, M., Ding, P., Yang, C., She, D., & Liu, Z. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.3004589 · Cited by 83
Self-citationFault diagnosis method of rolling bearings based on adaptive modified CEEMD and 1DCNN model
Gao, S., Li, T., Zhang, Y., & Pei, Z. (2023) · ISA Transactions · doi:10.1016/j.isatra.2023.05.014 · Cited by 79
Bearing Fault Classification Based on Convolutional Neural Network in Noise Environment
Jiang, Q., Chang, F., & Sheng, B. (2019) · IEEE Access · doi:10.1109/access.2019.2919126 · Cited by 80
Qiao, H., Tai-yong, W., Wang, P., Zhang, L., & Xu, M.-D. (2019) · IEEE Access · doi:10.1109/access.2019.2936625 · Cited by 77
Toma, R. N., Kim, C. H., & Kim, J.-M. (2021) · Electronics · doi:10.3390/electronics10111248 · Cited by 71
Xiong, S., Zhou, H., He, S., Zhang, L., Xia, Q., Xuan, J., & Shi, T. (2020) · Sensors · doi:10.3390/s20174965 · Cited by 74
Geng, Y., Wang, Z., Jia, L., Qin, Y., & Chen, X. (2020) · Measurement · doi:10.1016/j.measurement.2020.108191 · Cited by 71
Self-citationSi, J., Shi, H., Chen, J., & Zheng, C. (2020) · Measurement · doi:10.1016/j.measurement.2020.108827 · Cited by 62
Sun, J., Wen, J., Yuan, C., Liu, Z., & Xiao, Q. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3131722 · Cited by 57
Self-citationPeng, D., Yazdanianasr, M., Mauricio, A., Verwimp, T., Desmet, W., & Gryllias, K. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.112266 · Cited by 57
Self-citationGao, W., Qiao, S.-P., Wai, R., & Guo, M. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3011734 · Cited by 60
Multi-feature fusion for fault diagnosis of rotating machinery based on convolutional neural network
Liu, S., Ji, Z., Wang, Y., Zhang, Z., Xu, Z., Kan, C., & Jin, K. (2021) · Computer Communications · doi:10.1016/j.comcom.2021.04.016 · Cited by 53
Mitra, S., Mukhopadhyay, R., & Chattopadhyay, P. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.118178 · Cited by 54
Zabin, M., Choi, H., & Uddin, J. (2022) · The Journal of Supercomputing · doi:10.1007/s11227-022-04830-8 · Cited by 50
Machine learning for fault diagnosis of high-speed train traction systems: A review
Wang, H., Li, Y., & Ren, J. (2023) · Frontiers of Engineering Management · doi:10.1007/s42524-023-0256-2 · Cited by 52
Self-citationShi, Z., Chen, J., Zi, Y., & Zhou, Z. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3055821 · Cited by 53
Defect Depth Determination in Laser Infrared Thermography Based on LSTM-RNN
Wang, Q., Liu, Q., Xia, R., Li, G., Gao, J., Zhou, H., & Zhao, B. (2020) · IEEE Access · doi:10.1109/access.2020.3018116 · Cited by 47
Zhang, Z., Chen, L., Zhang, C., Shi, H., & Li, H. (2022) · Measurement · doi:10.1016/j.measurement.2022.111203 · Cited by 48
Ying, W., Li, L., Li, Y., Wang, T., Zheng, J., & Feng, K. (2025) · Information Fusion · doi:10.1016/j.inffus.2025.103377 · Cited by 51
Hou, Z., Liu, J., & Yu, S. (2025) · Scientific Reports · doi:10.1038/s41598-025-02596-6 · Cited by 49
Bearing Fault Diagnosis Based on Shallow Multi-Scale Convolutional Neural Network with Attention
Huang, T., Fu, S., Feng, H., & Kuang, J. (2019) · Energies · doi:10.3390/en12203937 · Cited by 46
Wang, Q., Liu, Q., Xia, R., Zhang, P., Zhou, H., Zhao, B., & Li, G. (2021) · Infrared Physics & Technology · doi:10.1016/j.infrared.2021.103673 · Cited by 46
Saini, M., Satija, U., & Upadhayay, M. D. (2022) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2022.103494 · Cited by 57
A CNN-RNN unified framework for intrapartum cardiotocograph classification
Liang, H., & Lu, Y. (2022) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2022.107300 · Cited by 49
Zan, T., Wang, H., Wang, M., Liu, Z., & Gao, X. (2019) · Applied Sciences · doi:10.3390/app9132690 · Cited by 48
Self-citationDetecting Unexpected Faults of High-Speed Train Bogie Based on Bayesian Deep Learning
Wu, Y., Jin, W., Li, Y., Sun, Z., & Ren, J. (2020) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2020.3048027 · Cited by 47
Chu, C., Ge, Y., Qian, Q., Hua, B., & Guo, J. (2021) · Digital Signal Processing · doi:10.1016/j.dsp.2021.103355 · Cited by 42
Zhao, H., Ni, P., Zhao, Q., Liang, X., Ai, D., Erhardt, S., Wang, J., Li, Y., & Wang, J. (2023) · Communications Biology · doi:10.1038/s42003-023-05243-w · Cited by 42
Fault Diagnosis for Wind Turbine Gearboxes by Using Deep Enhanced Fusion Network
Pu, Z., Li, C., Zhang, S., & Bai, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3024048 · Cited by 49
Knowledge transfer in fault diagnosis of rotary machines
Liu, G., Shen, W., Gao, L., & Kusiak, A. (2022) · IET Collaborative Intelligent Manufacturing · doi:10.1049/cim2.12047 · Cited by 44
An attention-enhanced multi-modal deep learning algorithm for robotic compound fault diagnosis
Zhou, X., Zeng, H., Chen, C., Xiao, H. B., & Xiang, Z. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac93a5 · Cited by 41
Abtane, M., Dahi, K., Martinez, H., Mohamed, S., Kimi, H. E., Dahhassi, C., Hlib, C., & Borges, L. F. (2025) · Measurement · doi:10.1016/j.measurement.2025.117098 · Cited by 50
Health Indicator for Low-Speed Axial Bearings Using Variational Autoencoders
Hemmer, M., Klausen, A., Khang, H. V., Robbersmyr, K. G., & Waag, T. I. (2020) · IEEE Access · doi:10.1109/access.2020.2974942 · Cited by 42
Fault Diagnosis under Variable Working Conditions Based on STFT and Transfer Deep Residual Network
Du, Y., Wang, A., Wang, S., He, B., & Meng, G. (2020) · Shock and Vibration · doi:10.1155/2020/1274380 · Cited by 50
Enhanced Lightweight Multiscale Convolutional Neural Network for Rolling Bearing Fault Diagnosis
Shi, Y., Deng, A., Deng, M., Zhu, J., Liu, Y., & Cheng, Q. (2020) · IEEE Access · doi:10.1109/access.2020.3041735 · Cited by 40
RNN-Aided Human Velocity Estimation from a Single IMU
Feigl, T., Kram, S., Woller, P., Siddiqui, R. H., Philippsen, M., & Mutschler, C. (2020) · Sensors · doi:10.3390/s20133656 · Cited by 42
Wang, Y., Zhou, J. H., Zheng, L., & Gogu, C. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01671-1 · Cited by 44
High-Accuracy and Adaptive Fault Diagnosis of High-Speed Train Bogie Using Dense-Squeeze Network
Zhang, Y., Qin, N., Huang, D., Wu, B., & Liu, Z. (2022) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2022.3143585 · Cited by 40
Self-citationChi, J., & Kim, H. (2021) · GIScience & Remote Sensing · doi:10.1080/15481603.2021.1943213 · Cited by 41
Prediction of wind turbine blades icing based on feature Selection and 1D-CNN-SBiGRU
Li, Y., Hou, L., Tang, M., Sun, Q., Chen, J., Song, W., Yao, W. F., & Cao, L. (2021) · Multimedia Tools and Applications · doi:10.1007/s11042-021-11700-7 · Cited by 37
An Explainable and Lightweight Improved 1-D CNN Model for Vibration Signals of Rotating Machinery
Pang, P., Tang, J., Luo, J., Miao, C., Yuan, H., & Jiang, L. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3327783 · Cited by 37
Wang, H., Liu, Z., & Ai, T. (2022) · Journal of Dynamics Monitoring and Diagnostics · doi:10.37965/jdmd.2022.53 · Cited by 37
Self-citationToma, R. N., Piltan, F., Im, K., Shon, D., Yoon, T. H., Yoo, D.-S., & Kim, J.-M. (2022) · Sensors · doi:10.3390/s22134881 · Cited by 38
Zhang, H., Che, W., Cao, Y., Guan, Z., & Zhu, C. (2024) · Iranian Journal of Science and Technology Transactions of Mechanical Engineering · doi:10.1007/s40997-024-00783-w · Cited by 36
Tang, H., Gao, S., Wang, L., Li, X., Li, B., & Pang, S. (2021) · Sensors · doi:10.3390/s21206754 · Cited by 35
Elevator vibration signal denoising by deep residual U-Net
Xie, P., Zhang, L., Li, M., Lau, S. F. S., & Huang, J. (2023) · Measurement · doi:10.1016/j.measurement.2023.113976 · Cited by 32
A Robust Deep-Learning Model to Detect Major Depressive Disorder Utilizing EEG Signals
Anik, I. A., Kamal, A. H. M., Kabir, M. A., Uddin, S., & Moni, M. A. (2024) · IEEE Transactions on Artificial Intelligence · doi:10.1109/tai.2024.3394792 · Cited by 35
DPCCNN: A new lightweight fault diagnosis model for small samples and high noise problem
Zhang, J., Zhao, Z., Jiao, Y., Zhao, R., Hu, X., & Che, R. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.129526 · Cited by 35
Liu, Q., Liang, T., & Dinavahi, V. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.3022750 · Cited by 31
Riaz, N., Shah, S. I. A., Rehman, F., & Khan, M. J. (2021) · IEEE Access · doi:10.1109/access.2021.3062496 · Cited by 33
Zhou, J. H., Zheng, L., Wang, Y., & Gogu, C. (2020) · IEEE Access · doi:10.1109/access.2020.2990739 · Cited by 33
Early Fault Detection Based on Wind Turbine SCADA Data Using Convolutional Neural Networks
Ulmer, M., Jarlskog, E., Pizza, G., Manninen, J., & Huber, L. G. (2020) · PHM Society European Conference · doi:10.36001/phme.2020.v5i1.1217 · Cited by 33
Shao, Z., Li, W., Xiang, H., Yang, S., & Weng, Z. (2023) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00844-x · Cited by 31
Self-Supervised Defect Representation Learning for Label-Limited Rail Surface Defect Detection
Xu, Y., Wang, H., Liu, Z., & Zuo, M. J. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3324668 · Cited by 30
Self-citationShi, H., Chen, J., Si, J., & Zheng, C. (2020) · Sensors · doi:10.3390/s20205734 · Cited by 29
Driver Facial Expression Analysis Using LFA-CRNN-Based Feature Extraction for Health-Risk Decisions
Kim, C., Hong, E. J., Chung, K., & Park, R. C. (2020) · Applied Sciences · doi:10.3390/app10082956 · Cited by 26
Bearing fault diagnosis based on improved VMD and DCNN
Wang, R., Xu, L., & Liu, F. (2020) · Journal of Vibroengineering · doi:10.21595/jve.2020.21187 · Cited by 26
Overview of Equipment Health State Estimation and Remaining Life Prediction Methods
Zhao, J., Gao, C., Tang, T., Xiao, X., Luo, M., & Yuan, B. (2022) · Machines · doi:10.3390/machines10060422 · Cited by 34
Saini, M., Satija, U., & Upadhayay, M. D. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3232481 · Cited by 25
Rolling Bearing Fault Diagnosis Using Improved Deep Residual Shrinkage Networks
Zhang, Z., Li, H., Chen, L., & Han, P. (2021) · Shock and Vibration · doi:10.1155/2021/9942249 · Cited by 24
Bearing Fault Diagnosis of End‐to‐End Model Design Based on 1DCNN‐GRU Network
Zhiwei, L. (2022) · Discrete Dynamics in Nature and Society · doi:10.1155/2022/7167821 · Cited by 29
A Novel Pipeline Corrosion Monitoring Method Based on Piezoelectric Active Sensing and CNN
Yang, D., Zhang, X., Zhou, T., Wang, T., & Li, J. (2023) · Sensors · doi:10.3390/s23020855 · Cited by 24
Wang, Y., Huang, S., Dai, J., & Tang, J. (2020) · Shock and Vibration · doi:10.1155/2020/1850286 · Cited by 26
Fault classification in the process industry using polygon generation and deep learning
Elhefnawy, M., Ragab, A., & Ouali, M.-S. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01742-x · Cited by 28
Song, H., Ma, W., Han, Z., & Zhu, X. (2022) · Measurement · doi:10.1016/j.measurement.2022.111353 · Cited by 25
1DCNN Fault Diagnosis Based on Cubic Spline Interpolation Pooling
Huang, S., Tang, J., Dai, J., Wang, Y., & Dong, J. (2020) · Shock and Vibration · doi:10.1155/2020/1949863 · Cited by 22
Wang, T., Zhang, L., Qiao, H., & Wang, P. (2020) · Journal of Vibroengineering · doi:10.21595/jve.2019.20784 · Cited by 24
Tan, S., Wang, K., Shi, H., & Song, B. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3222511 · Cited by 24
Wang, H., Luo, W., Liu, Z., Zhang, J., & Zuo, M. J. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3363216 · Cited by 22
Self-citationLi, X., Fang, Y., & Liu, L. (2019) · IEEE Access · doi:10.1109/access.2019.2962544 · Cited by 21
Bearing Fault Diagnosis Based on Multilayer Domain Adaptation
Yang, B., Li, Q., Chen, L., Shen, C., & Natarajan, S. (2020) · Shock and Vibration · doi:10.1155/2020/8873960 · Cited by 22
Metadata
- Authors
- Peng, D., Liu, Z., Wang, H., Qin, Y., & Jia, L.
- Affiliations
- University of Electronic Science and Technology of China (CN)
- Beijing Jiaotong University (CN)
- Venue
- IEEE Access
- Published
- 2019
- Volume
- 7
- Pages
- 10278-10293
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2905949437
- Cited by
- 271
- References
- 37
- Citations by year
- 2026: 12 · 2025: 41 · 2024: 34 · 2023: 34 · 2022: 41 · 2021: 44 · 2020: 47 · 2019: 18
- FWCI
- 16.87
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Basic Research Program of China (2016YFB1200401)
- National Natural Science Foundation of China (51505066, 61833002)
- State Key Laboratory of Rail Traffic Control and Safety (RCS2018K002)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- high-speed trains, 1D convolutional neural network, residual learning, dropout, vibration signal analysis, railway bogie
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.