A Novel Deeper One-Dimensional CNN With Residual Learning for Fault Diagnosis of Wheelset Bearings in High-Speed Trains
Open accessThe DOI matches its Crossref record; 34 of the 37 references it cites were found in a registry or an index.
Abstract
The health condition of a wheelset bearing, the key component of a railway bogie, has a considerable impact on the safety of a train. Traditional bearing fault diagnosis techniques generally extract signals manually and then diagnose the bearing health conditions through the classifier. However, high-speed trains (HSTs) are usually faced with variable loads, variable speeds, and strong environmental noise, which pose a huge challenge to the application of the traditional bearing fault diagnosis methods in wheelset bearing fault diagnosis. Therefore, this paper proposes a 1D residual block, and based on the block, a novel deeper 1D convolutional neural network (Der-1DCNN) is proposed. The framework includes the idea of residual learning and can effectively learn high-level and abstract features while effectively alleviating the problem of training difficulty and the performance degradation of a deeper network. Additionally, for the first time, we fully use the wide convolution kernel and dropout technology to improve the model's ability to learn low-frequency signal features related to the fault components and to enhance the network's generalization performance. By constructing a deep residual learning network, Der-1DCNN can adaptively learn the deep fault features of the original vibration signal. This method not only achieves very high diagnostic accuracy for the fault diagnosis task of wheelset bearings in HSTs under strong noise environment, but also its performance is quite superior when the train's working load changes without any domain adaptation algorithm processing. The proposed Der-1DCNN is evaluated on the dataset of the multi-operating conditions of the wheelset bearings of HSTs. Experiments show that this method shows a better diagnostic performance compared with the state-of-the-art deep learning methods of bearing fault diagnosis, which proves the method's effectiveness and superiority.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805 · cited 1×
“A convolutional neural network (CNN) [12] is a powerful deep learning method that has been successfully applied in various fields, such as computer vision [13], speech recognition [14], natural language processing [15] and one-dimensional (1D) signal processing [16].”
Method(2014) · Cited by 33,419
(2008) · Journal of Machine Learning Research · Cited by 33,051
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
Convolutional Neural Networks for Sentence Classification
Kim, Y. (2014) · Proceedings of the 2014 Conference on Empirical Methods in Natural Language Processing (EMNLP) · doi:10.3115/v1/d14-1181 · Cited by 14,831
(2010) · International Conference on Machine Learning · Cited by 13,995
Hinton, G., Deng, L., Yu, D., Dahl, G., Mohamed, A.-R., Jaitly, N., Senior, A., Vanhoucke, V., Nguyen, P., Sainath, T., et al. (2012) · IEEE Signal Processing Magazine · doi:10.1109/msp.2012.2205597 · Cited by 10,260
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222 · cited 5×
“When the SNR is large, the Wen-CNN, MSCNN and WDCNN achieve similar diagnostic performance levels, and the accuracy does not increase as the SNR increases.”
MethodInfluentialZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925 · cited 5×
“When the SNR is large, the Wen-CNN, MSCNN and WDCNN achieve similar diagnostic performance levels, and the accuracy does not increase as the SNR increases.”
BackgroundMethodInfluentialLSTM Fully Convolutional Networks for Time Series Classification
Karim, F., Majumdar, S., Darabi, H., & Chen, S. (2018) · IEEE Access · doi:10.1109/access.2017.2779939 · Cited by 1,465
Zhang, W., Li, C., Peng, G., Chen, Y., & Zhang, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.022 · Cited by 1,421 · cited 1×
“In 2018, he also proposed the TICNNmodel with training interference, which can work on raw noisy data and under different working loads for bearing fault diagnosis [31].”
BackgroundReal-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
Srivastava, R. K., Greff, K., & Schmidhuber, J. (2015) · arXiv (Cornell University) · doi:10.48550/arxiv.1507.06228 · Cited by 1,246
Multiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
Hierarchical adaptive deep convolution neural network and its application to bearing fault diagnosis
Guo, X., Chen, L., & Shen, C. (2016) · Measurement · doi:10.1016/j.measurement.2016.07.054 · Cited by 782
Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks
Xia, M., Li, T., Xu, L., Liu, L., & de Silva, C. W. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2728371 · Cited by 723 · cited 1×
“[29] designed the 1D-CNN model to diagnose faults of rotating machinery, and it proved that the diagnosis result of”
MethodTian, J., Morillo, C., Azarian, M. H., & Pecht, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509913 · Cited by 488
Gearbox Fault Identification and Classification with Convolutional Neural Networks
Chen, Z., Li, C., & Sanchez, R.-V. (2015) · Shock and Vibration · doi:10.1155/2015/390134 · Cited by 391
Rolling element bearing fault diagnosis using wavelet packets
Nikolaou, N. G., & Antoniadis, I. A. (2002) · NDT & E International · doi:10.1016/s0963-8695(01)00044-5 · Cited by 377
A fault diagnosis approach for roller bearing based on IMF envelope spectrum and SVM
Yang, Y., Yu, D., & Cheng, J. (2007) · Measurement · doi:10.1016/j.measurement.2006.10.010 · Cited by 334
Intelligent fault diagnosis of rolling element bearing based on SVMs and fractal dimension
Yang, J., Zhang, Y., & Zhu, Y. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.10.005 · Cited by 275
Wheel-bearing fault diagnosis of trains using empirical wavelet transform
Cao, H., Fan, F., Zhou, K., & He, Z. (2016) · Measurement · doi:10.1016/j.measurement.2016.01.023 · Cited by 262
Yin, J., & Zhao, W. (2016) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2016.10.002 · Cited by 173 · cited 4×
“A. INTELLIGENT FAULT DIAGNOSIS METHODS FOR HIGH SPEED TRAINS In the field of the intelligent fault diagnosis of HSTs, Zhao et al. [20] introduced empirical mode decomposition (EMD) and fuzzy entropy to extract the signal features of HSTs, and a back propagation (BP) neural network was applied as the model for fault di…”
BackgroundInfluentialA SVM framework for fault detection of the braking system in a high speed train
Liu, J., Li, Y., & Zio, E. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.10.034 · Cited by 117
Learning features from High Speed Train vibration signals with Deep Belief Networks
Xie, J., Li, T., Yang, Y. Z., & Jin, W. (2014) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2014.6889729 · Cited by 35
High Speed Train Bogie Fault Signal Analysis Based on Wavelet Entropy Feature
Qin, N., Jin, W. D., Huang, J. Y., Jiang, P., & Li, Z. M. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.753-755.2286 · Cited by 27
Fault analysis of High Speed Train with DBN hierarchical ensemble
Guo, C., Yang, Y. Z., Pan, H., Li, T., & Jin, W. (2016) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2016.7727518 · Cited by 25
Application of Empirical Mode Decomposition and Fuzzy Entropy to High-Speed Rail Fault Diagnosis
Zhao, J., Yang, Y. T., Li, T., & Jin, W. (2014) · Advances in intelligent systems and computing · doi:10.1007/978-3-642-54924-3_9 · Cited by 16
Qin, N. (2014) · Control theory & applications · Cited by 5
Research works printed but not linked: 5
- Yang, 2006, A roller hearing fault diagnosis method baesd on EMD energy entropy and ANN, J. Sound Vib., 294, 269
- Wang, 2015, Application of EEMD-based resonance demodulation technology in train bearing fault diagnosis, Modern Electron. Technol., 38, 24
- Pang, 2015, Faults recognition of high-speed train bogie based on deep learning, J. Railway Sci. Eng., 12, 1283
- Lin, Network in network, Comput. Sci.
- Goodfellow, 2016, Deep Learning
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
A systematic review of deep transfer learning for machinery fault diagnosis
Li, C., Zhang, S., Qin, Y., & Estupinan, E. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.04.045 · Cited by 472
A New Intelligent Bearing Fault Diagnosis Method Using SDP Representation and SE-CNN
Wang, H., Xu, J., Yan, R., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2956332 · Cited by 353
Self-citationPeng, D., Wang, H., Liu, Z., Zhang, W., Zuo, M. J., & Chen, J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967557 · Cited by 350
Self-citation
Metadata
- Authors
- Peng, D., Liu, Z., Wang, H., Qin, Y., & Jia, L.
- Affiliations
- University of Electronic Science and Technology of China (CN)
- Beijing Jiaotong University (CN)
- Venue
- IEEE Access
- Published
- 2019
- Volume
- 7
- Pages
- 10278-10293
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2905949437
- Cited by
- 271
- References
- 37
- Citations by year
- 2026: 12 · 2025: 41 · 2024: 34 · 2023: 34 · 2022: 41 · 2021: 44 · 2020: 47 · 2019: 18
- FWCI
- 16.87
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Basic Research Program of China (2016YFB1200401)
- National Natural Science Foundation of China (51505066, 61833002)
- State Key Laboratory of Rail Traffic Control and Safety (RCS2018K002)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- high-speed trains, 1D convolutional neural network, residual learning, dropout, vibration signal analysis, railway bogie
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.