A Comprehensive Security Analysis of a SCADA Protocol: From OSINT to Mitigation
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
It is an established fact that the security of Industrial Automation and Control Systems (IACS) strongly depends on the robustness of the underlying supervisory control and data acquisition (SCADA) network protocols (among other factors). This becomes especially evident when considering the extent to which certain protocols, designed with poor or nonexistent security mechanisms, have led to a considerable number of past incident reports affecting critical infrastructures and essential services. Considering the current situation, it is rather obvious why the proper auditing and analysis of SCADA protocols are considered as key when it comes to design and/or protect IACS infrastructures. However, while the security of some protocols, such as Modbus or DNP3, has already been extensively analyzed, the same cannot be said for other protocols and technologies being used in the same domain that have not received the same amount of attention. In this paper, we provide a comprehensive security analysis of the PCOM SCADA protocol, including a dissection of PCOM, a demonstration of several attacks scenarios on PCOM-based systems, and also an analysis of possible mitigation strategies against these potential attacks. Moreover, this paper also describes a number of open-source tools that we developed for further analysis and research of PCOM security aspects, including a PCOM Wireshark dissector, a Nmap NSE PCOM scan, multiple Metasploit PCOM modules, a set of Snort PCOM rules, and several network traffic datasets containing multiple samples of different types of PCOM operations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cyber-Physical Systems Security—A Survey
Humayed, A., Lin, J., Li, F., & Luo, B. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2703172 · Cited by 1,185 · cited 1×
“RELATED WORK SCADA security has been widely discussed [10] [11] [12] and several security design flaws have already been identified.”
BackgroundA Taxonomy of Cyber Attacks on SCADA Systems
Zhu, B., Joseph, A., & Sastry, S. (2011) · 2011 International Conference on Internet of Things and 4th International Conference on Cyber, Physical and Social Computing · doi:10.1109/ithings/cpscom.2011.34 · Cited by 458 · cited 1×
“Several types of attacks have been referred in the literature [13], focused mainly on intelligence gathering, network reconnaissance, accessing and changing restricted process parameters and, finally, disrupting the physical processes under control (with its inherent consequences).”
BackgroundAssessing and augmenting SCADA cyber security: A survey of techniques
Nazir, S., Patel, S., & Patel, D. (2017) · Computers & Security · doi:10.1016/j.cose.2017.06.010 · Cited by 167 · cited 1×
“RELATED WORK SCADA security has been widely discussed [10] [11] [12] and several security design flaws have already been identified.”
Background
Research works printed but not linked: 45
- 10.23919/INM.2017.7987369 · DOI
- rosa, 2019, SCADA Scan to Collect Information From Unitronics PLCS Via PCOM Protocol
- rosa, 2019, PCOMTCP New Built-in Dissector for PCOM Protocol
- 2019, Wireshark–7 4 Expert Information
- 2019, A Set of ICS IDS Rules for Use With Suricata
- jordan, 2019, Snort 2 9 2 Scada preprocessors
- 0, The Penetration Testing Execution Standard
- rosa, 2019, PCOMTCP PCOM/Binary Command to Descriptions
- rosa, 2019, PCOMTCP Dissection of Additional PCOM/ASCII Fields
- wightman, 2019, Schneider Modicon Ladder Logic Upload/Download
- monteiro, 2019, DoS Exploitation Of Allen-Bradley’s Legacy Protocol (PCCC)
- hilt, 2019, Digital Bond’s IDS/IPS Rules for ICS and ICS Protocols
- 2006, Modbus Application Protocol Specification V1 1b
- 2017, Communication Network Dependencies for ICS/SCADA Systems
- rudakov, 2019, Enumerates SCADA Modbus Slave IDS (SIDS) and Collects Their Device Information
- deneut, 2019, S7 NMAP Scan
- hilt, 2019, ENIP NMAP Scan
- esmnemon, 0, Modbus Client Utility
- hilt, 2019, S7 NMAP Scan
- santamarta, 2019, Allen-Bradley/Rockwell Automation EtherNet/IP CIP Commands
- wightman, 2019, Schneider Modicon Remote START/STOP Command
- rosa, 2019, New Module Pcomclient
- knapp, 2014, Industrial Network Security Securing Critical Infrastructure Networks for Smart Grid SCADA and Other Industrial Control Systems
- 10.1109/AINS.2017.8270432 · DOI
- cherepanov, 2017, WIN32/INDUSTROYER A new threat for industrial control systems
- 0, Visilogic for Vision and Samba
- lion, 2019, Crimson 3 0
- 2019, Network Drivers
- thériault, 2019, PCOM—A Basic PCOM Implementation in Python
- 2019, Communication With the Vision PLC
- 2018, Modbus/TCP Security Protocol Specification
- 2019, Wireshark Go deep
- 2019, SecTools-Top Network Security Tools
- 2019, Snort intrusion detection and prevention system
- 2019, Metasploit |Penetration Testing Software Pen Testing Security
- rosa, 2019, Pcom PCAP Captures
- lyon, 2019, Nmap the Network Mapper—Free Security Scanner
- de freitas, 2018, SDN-enabled virtual data diode, Computer Security, 102
- rosa, 2019, New Snort Rules for PCOM Protocol
- 10.1007/978-3-319-18302-2_16 · DOI
- rist, 2013, CONPOT ICS/SCADA honeypot
- 10.1109/TII.2016.2599841 · DOI · Paper page
- stouffer, 2014, NIST special publication 800-82, revision 2: Guide to industrial control systems (ICS) security, Proceedings of NIST
- langner, 2013, To Kill a Centrifuge A Technical Analysis of What Stuxnet’s Creators Tried to Achieve
- rosa, 2019, New PCOM Module to Send Admin Commands
Cited by
A Survey on SCADA Systems: Secure Protocols, Incidents, Threats and Tactics
Pliatsios, D., Sarigiannidis, P., Lagkas, T., & Sarigiannidis, A. G. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.2987688 · Cited by 320
“Unitronics PCOM [25], [26] is a communication protocol that enables applications to communicate with PLC devices, based on requests and responses.”
BackgroundL, R., & Satyanarayana, P. (2021) · Security and Communication Networks · doi:10.1155/2021/8887666 · Cited by 28
Cryptographic Considerations for Automation and SCADA Systems Using Trusted Platform Modules
Tidrea, A., Korodi, A., & Silea, I. (2019) · Sensors · doi:10.3390/s19194191 · Cited by 24
“Another approach is presented in [32] where an intrusion detection system is proposed on the clustering of the sequences corresponding to the attacks collected through honeypot for Modbus TCP protocol called Conpot.”
MethodEarly Detection of Vulnerabilities from News Websites using Machine Learning Models
Iorga, D., Corlatescu, D., Grigorescu, O., Sandescu, C., Dascalu, M., & Rughinis, R. (2020) · 2020 19th RoEduNet Conference: Networking in Education and Research (RoEduNet) · doi:10.1109/roedunet51892.2020.9324852 · Cited by 20
Metadata
- Authors
- Rosa, L., Freitas, M., Mazo, S., Monteiro, E., Cruz, T., & Simoes, P.
- Venue
- IEEE Access
- Published
- 2019
- Volume
- 7
- Pages
- 42156-42168
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2939784618
- Cited by
- 41
- References
- 3
- FWCI
- 2.64
- Type
- journal article
- Language
- en
- Open access
- gold
- Funders
- Horizon 2020 Framework Programme (700581)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Comprehensive Security Analysis of a SCADA Protocol: From OSINT to Mitigation. https://app.cochat.ai/papers/10.1109/access.2019.2906926
- The paper
- Rosa, L., Freitas, M., Mazo, S., Monteiro, E., Cruz, T., & Simoes, P. (2019). A Comprehensive Security Analysis of a SCADA Protocol: From OSINT to Mitigation. IEEE Access. https://doi.org/10.1109/access.2019.2906926
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.