Additive Manufacturing Cyber-Physical System: Supply Chain Cybersecurity and Risks
Open accessThe DOI matches its Crossref record; 33 of the 35 references it cites were found in a registry or an index.
Abstract
Additive Manufacturing (AM) methods have become increasingly efficient and industrially viable in the past ten years. These methods offer the freedom of complexity to the designers and choices of localized and pull-based production system to the managers. These propositions of AM have been enabling custom manufacturing and are catalysts for rapid growth of additive manufacturing (AM). This paper analyzes the general characteristics of AM supply chain and proposes three AM supply chain models based on the specific nature of the industry. Our description of the models emphasizes on adopting an holistic view of the AM supply chain and therefore includes raw material, printer hardware and the virtual supply chain. Throughout the product life cycle of additively manufactured products, the interlacing of the virtual supply chain (digital thread) with the physical supply chain and their operations fundamentally make the AM process a cyber-physical system (CPS). Therefore, the technology brings along with it benefits of a CPS as well as a new class of attack vectors. We discuss the possible attacks (printer, raw material and design level), risks (reverse engineering, counterfeiting and theft) and provide an enhanced risk classification scheme. We contend that the traditional cybersecurity methods need to evolve to address the new class of attack vectors that threaten the AM supply chain and also discuss the nature of existing solutions that help in addressing the risks and attack thr…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305 · cited 1×
“…thread to create a computational framework(cid:22)nowadays known as a digital twin (cid:22) to emulate and analyze the product and the process before (for design and process planning), during (for quality assurance) and after (diagnostics and maintenance) the realization of a product [12], [13].”
BackgroundThe Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994 · cited 1×
“One of the main research thrusts of the manufacturing community for the past 30 years has been to harness the digital thread to create a computational framework—nowadays known as a digital twin— to emulate and analyze the product and the process before (for design and process planning), during (for quality assurance)…”
BackgroundA new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810 · cited 1×
“The pharmaceutical manufacturing industry is capable of producing personalized drug dosage based on patient’s mass and metabolism [1].”
BackgroundBlockchain Platform for Industrial Internet of Things
Bahga, A., & Madisetti, V. K. (2016) · Journal of Software Engineering and Applications · doi:10.4236/jsea.2016.910036 · Cited by 693 · cited 1×
“This can bring the bene(cid:28)ts of blockchain in process chains of manufacturers for secure communication among autonomous entities [32].”
BackgroundBioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589 · cited 1×
“Releas-ing the constraint of complexity in design is leveraged by the biotechnology industry to provide patients with anatomically speci(cid:28)c prosthetics including bone implants [2], heart valves [3] and tracheal splints [4].”
BackgroundBlockchain in Additive Manufacturing and its Impact on Supply Chains
Kurpjuweit, S., Schmidt, C. G., Klöckner, M., & Wagner, S. M. (2021) · Journal of Business Logistics · doi:10.1111/jbl.12231 · Cited by 305 · cited 1×
“Developments have taken place in mitigating risks of counterfeiting [18], [19], transparency [20], [21] and the manufacturing process [22], [23] in the AM security.”
BackgroundA Taxonomy of Blockchain Technologies: Principles of Identification and Classification
Tasca, P., & Tessone, C. J. (2019) · Ledger · doi:10.5195/ledger.2019.140 · Cited by 260
Manufacturing and Security Challenges in 3D Printing
Zeltmann, S. E., Gupta, N., Tsoutsos, N. G., Maniatakos, M., Rajendran, J., & Karri, R. (2016) · JOM · doi:10.1007/s11837-016-1937-7 · Cited by 245 · cited 1×
“In large size part with internal details, sometimes detection of internal defects may be very challenging due to the limitations of imaging and testing methods [30].”
BackgroundSelf-citationA systems approach for modelling supply chain risks
Ghadge, A., Dani, S., Chester, M., & Kalawsky, R. (2013) · Supply Chain Management: An International Journal · doi:10.1108/scm-11-2012-0366 · Cited by 221 · cited 1×
“Supply chain risk management (SCRM) frameworks involve stages of risk identification, risk assessment and risk mitigation [15].”
BackgroundDesign and 3D-printing of titanium bone implants: brief review of approach and clinical cases
Popov, V. V., Muller-Kamskii, G., Kovalevsky, A., Dzhenzhera, G., Strokin, E., Kolomiets, A., & Ramon, J. (2018) · Biomedical Engineering Letters · doi:10.1007/s13534-018-0080-5 · Cited by 183 · cited 1×
“Releas-ing the constraint of complexity in design is leveraged by the biotechnology industry to provide patients with anatomically speci(cid:28)c prosthetics including bone implants [2], heart valves [3] and tracheal splints [4].”
Background
Research works printed but not linked: 4
- 2018, Scientists 3D Print Parkinson’s Medicine for First Time With UV Inkjet 3D Printing-3D Printing Industry
- 2019, RepRap org
- caccamo, 2016, 3D Printing Blows up Supply Chain Risk Management
- 2019, Cyber Security for Government Additive Manufacturing
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Cybersecurity in logistics and supply chain management: An overview and future research directions
Cheung, K.-F., Bell, M. G. H., & Bhattacharjya, J. (2021) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2020.102217 · Cited by 213
Rad, F. F., Oghazi, P., Palmié, M., Chirumalla, K., Pashkevich, N., Patel, P. C., & Sattari, S. (2022) · Industrial Marketing Management · doi:10.1016/j.indmarman.2022.06.009 · Cited by 207
Chauhan, S., Singh, R., Gehlot, A., Akram, S. V., Twala, B., & Priyadarshi, N. (2022) · Processes · doi:10.3390/pr11010096 · Cited by 173
Babu, S. S., Mourad, A. I., Harib, K. H., & Vijayavenkataraman, S. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2141653 · Cited by 160
“Other solutions (Gupta et al. 2020) devised towards mitigating these cyber risks include the non-traditional formulation of a supply chain model for the 3DP, which includes the printer, raw materials and design fi les.”
Background
Metadata
- Authors
- Gupta, N., Tiwari, A., Bukkapatnam, S. T. S., & Karri, R.
- Affiliations
- Texas A&M University (US)
- New York University (US)
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 47322-47333
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3010383105
- Cited by
- 144
- References
- 35
- Citations by year
- 2026: 16 · 2025: 30 · 2024: 25 · 2023: 17 · 2022: 31 · 2021: 17 · 2020: 9
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Science Foundation (CMMI-1932264)
- Texas A&M University’s x-Grants
- Rockwell International Professorship
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Hardware and Architecture › Physical Unclonable Functions (PUFs) and Hardware Security
- Keywords
- additive manufacturing, supply chain cybersecurity, cyber-physical systems, digital thread, attack vectors, reverse engineering, counterfeiting, theft
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive Manufacturing Cyber-Physical System: Supply Chain Cybersecurity and Risks. https://app.cochat.ai/papers/10.1109/access.2020.2978815
- The paper
- Gupta, N., Tiwari, A., Bukkapatnam, S. T. S., & Karri, R. (2020). Additive Manufacturing Cyber-Physical System: Supply Chain Cybersecurity and Risks. IEEE Access. https://doi.org/10.1109/access.2020.2978815
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.