A Novel Acoustic Emission Sources Localization and Identification Method in Metallic Plates Based on Stacked Denoising Autoencoders
Open accessThe DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Nowadays, deep learning could be an alternative approach to crack characterization. However, to the best of the authors' knowledge, little research exists on a deep learning-based characterization of fatigue-related AE sources occurring in plate-like structures. Consequently, this paper introduces a stacked denoising autoencoders (SDAE)-based framework to localize acoustic emission (AE) sources in common and complex metallic panels. The experimental specimen are respectively a Q235B steel plate and a 316L stainless steel containing a laser cladding layer. Specifically, SDAE is pre-trained and utilized to localize AE sources that are simulated by using the classical pencil lead break (PLB) approach. Meanwhile, the number of layers and hidden nodes of SDAE used for coordinate-based location is optimized according to a Bayesian Information Criteria (BIC) approach. To validate the proposed network and simplify the analysis, experiments are carried out on the surface of plate-like structures, which only one sensor is applied. After identifying AE sources that occur near laser cladding layers, the proposed approach classifies them into four source-to-laser cladding layer distance categories. Particularly, a ten-fold cross-validation method is utilized to improve the accuracy of localization in this paper. Moreover, the effectiveness analysis to the number of sensors and comparison with conventional machine learning methods, including support vector machine (SVM) and artificial neural network (ANN), are also evaluated. In order to validate the performance of the proposed approach in terms of coordinate-based source localization. Ultimately, the results demonstrate that 100% accuracy for zonal localization, and the root mean squared (RMS) localization errors of two metallic panels are 38 mm (1.5”) and 48 mm (1.9”), respectively. Additionally, in comparison with conventional machine learning approaches (i.e. SVM and ANN) which the RMS errors were 78 mm (2.5”) and 67 mm (2.1”), respectively, the coordinates-based localization accuracy is significantly improved using the proposed approach. The results demonstrate the proposed approach is effective in AE-based structural health monitoring of plate-like structures with single-sensor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The main applications are fatigue crack localization in metal plates [80,81,147], damage localization in composite panels [19], and concrete crack detection [62].”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [147]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Video associated cross-modal recommendation algorithm based on deep learning
Yang, F., Xie, H., & Li, H. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105597 · Cited by 25
RetractedLeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Computer vision and deep learning techniques for pedestrian detection and tracking: A survey
Brunetti, A., Buongiorno, D., Trotta, G. F., & Bevilacqua, V. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.01.092 · Cited by 536
Deep Learning Based Approach for Bearing Fault Diagnosis
He, M., & He, D. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2661250 · Cited by 484
Deep learning-based methods for person re-identification: A comprehensive review
Wu, D., Zheng, S.-J., Zhang, X.-P., Yuan, C.-A., Cheng, F., Zhao, Y., Lin, Y.-J., Zhao, Z.-Q., Jiang, Y.-L., & Huang, D.-S. (2019) · Neurocomputing · doi:10.1016/j.neucom.2019.01.079 · Cited by 229
Machine learning based crack mode classification from unlabeled acoustic emission waveform features
Das, A. K., Suthar, D., & Leung, C. K. Y. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.001 · Cited by 212
A deep learning framework for identifying children with ADHD using an EEG-based brain network
Chen, H., Song, Y., & Li, X. (2019) · Neurocomputing · doi:10.1016/j.neucom.2019.04.058 · Cited by 189
Dong, L., Zou, W., Li, X., Shu, W., & Wang, Z. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2018.01.032 · Cited by 188
Single-Sensor Acoustic Emission Source Localization in Plate-Like Structures Using Deep Learning
Ebrahimkhanlou, A., & Salamone, S. (2018) · Aerospace · doi:10.3390/aerospace5020050 · Cited by 168
Sun, M., Wang, H., Liu, P., Huang, S., & Fan, P. (2019) · Measurement · doi:10.1016/j.measurement.2019.06.029 · Cited by 168
A new qualitative acoustic emission parameter based on Shannon’s entropy for damage monitoring
Chai, M., Zhang, Z., & Duan, Q. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.08.007 · Cited by 144
Ebrahimkhanlou, A., Dubuc, B., & Salamone, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.04.050 · Cited by 141 · cited 2×
“AE signal processing system based on deep learning is gradually established [18], [29].”
BackgroundGomes, G. F., Mendéz, Y. A. D., da Silva Lopes Alexandrino, P., da Cunha, S. S., & Ancelotti, A. C. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.05.002 · Cited by 135
Ebrahimkhanlou, A., & Salamone, S. (2017) · Ultrasonics · doi:10.1016/j.ultras.2017.03.006 · Cited by 133
WekaDeeplearning4j: A deep learning package for Weka based on Deeplearning4j
Lang, S., Bravo-Márquez, F., Beckham, C., Hall, M., & Frank, E. (2019) · Knowledge-Based Systems · doi:10.1016/j.knosys.2019.04.013 · Cited by 131
Xu, D., Liu, P., Li, J. G., & Chen, Z. P. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.12.051 · Cited by 129
Zheng, J., Lu, J., Peng, S., & Jiang, T. (2017) · Geophysical Journal International · doi:10.1093/gji/ggx487 · Cited by 121
Holford, K. M., Eaton, M. J., Hensman, J. J., Pullin, R., Evans, S. L., Dervilis, N., & Worden, K. (2017) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2016.11.003 · Cited by 110
Ahn, B., Kim, J., & Choi, B.-K. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2018.03.010 · Cited by 109
Enhancing images of shale formations by a hybrid stochastic and deep learning algorithm
Kamrava, S., Tahmasebi, P., & Sahimi, M. (2019) · Neural Networks · doi:10.1016/j.neunet.2019.07.009 · Cited by 106
Zhu, X., Xiong, J., & Liang, Q. (2018) · IEEE Access · doi:10.1109/access.2018.2789933 · Cited by 99
Kumar, C. S., Arumugam, V., Ramasamy, S., Srinivasan, S., & Dhakal, H. N. (2016) · Applied Acoustics · doi:10.1016/j.apacoust.2016.08.013 · Cited by 94
Using acoustic emission to characterize friction and wear in dry sliding steel contacts
Geng, Z., Puhan, D., & Reddyhoff, T. (2019) · Tribology International · doi:10.1016/j.triboint.2019.02.014 · Cited by 91
Sadegh, H., Mehdi, A. N., & Mehdi, A. (2015) · Tribology International · doi:10.1016/j.triboint.2015.11.045 · Cited by 86
Wang, C., Bao, Z., Zhang, P., Ming, W., & Chen, M. (2019) · Measurement · doi:10.1016/j.measurement.2019.02.004 · Cited by 83
Wu, Y., Li, S., Wang, D., & Zhao, G. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.192 · Cited by 77
Evolutionary manifold regularized stacked denoising autoencoders for gearbox fault diagnosis
Yu, J. (2019) · Knowledge-Based Systems · doi:10.1016/j.knosys.2019.04.022 · Cited by 77
Gollob, S., Kocur, G. K., Schumacher, T., Mhamdi, L., & Vogel, T. (2016) · Ultrasonics · doi:10.1016/j.ultras.2016.09.024 · Cited by 67
FUENTES, R., Dwyer-Joyce, R. S., Marshall, M., Wheals, J. C., & Cross, E. J. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.019 · Cited by 65
Ebrahimkhanlou, A., & Salamone, S. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa78de · Cited by 59
Kharrat, M., Placet, V., Ramasso, E., & Boubakar, L. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.020 · Cited by 56
Tsangouri, E., Remy, O., Boulpaep, F., Verbruggen, S., Livitsanos, G., & Aggelis, D. G. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.035 · Cited by 55
Tziavos, N. I., Hemida, H., Dirar, S., Papaelias, M., Metje, N., & Baniotopoulos, C. C. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.114 · Cited by 55
Qiu, X., Xu, J., Xiao, S., & Yang, Q. G. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.150 · Cited by 52
Brunner, A. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.084 · Cited by 51
Grabowski, K., Gawroński, M., Baran, I., Spychalski, W., Staszewski, W. J., Uhl, T., Kundu, T., & Paćko, P. (2016) · Ultrasonics · doi:10.1016/j.ultras.2016.02.015 · Cited by 50
Vicuña, C. M., & Höweler, C. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.04.040 · Cited by 46
Knock-Knock: Acoustic object recognition by using stacked denoising autoencoders
Luo, S., Zhu, L., Althoefer, K. A., & Liu, H. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.03.014 · Cited by 42
Tsangouri, E., Michels, L., Kadi, M. E., Tysmans, T., & Aggelis, D. G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105776 · Cited by 42
Zhang, X., Wang, K., Wang, Y., Shen, Y., & Hu, H. (2019) · Applied Acoustics · doi:10.1016/j.apacoust.2019.107141 · Cited by 39
Rolling Element Bearings Fault Diagnosis Based on a Novel Optimal Frequency Band Selection Scheme
Ni, Q., Wang, K., & Zheng, J. (2019) · IEEE Access · doi:10.1109/access.2019.2921409 · Cited by 34
Seyyedsalehi, S. Z., & Seyyedsalehi, S. A. (2015) · Neurocomputing · doi:10.1016/j.neucom.2015.05.057 · Cited by 33
Jiang, Y., Xu, F., & Xu, B. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.013 · Cited by 31
Self-citationGao, Z., Wang, X., Lin, J., & Liao, Y. (2017) · Measurement · doi:10.1016/j.measurement.2017.02.049 · Cited by 30
Acoustic emission signal source localization on plywood surface with cross-correlation method
Li, Y., Yu, S.-S., Dai, L., Luo, T., & Li, M. (2018) · Journal of Wood Science · doi:10.1007/s10086-017-1672-x · Cited by 25
Li, Y., & Xu, F. (2019) · Measurement · doi:10.1016/j.measurement.2019.106978 · Cited by 23
Self-citationSelf-paced stacked denoising autoencoders based on differential evolution for change detection
Li, H., Gong, M., Wang, C., & Miao, Q. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.07.021 · Cited by 20
Carter, A., & Briens, L. A. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.08.052 · Cited by 17
Deconvolution of acoustic emissions for source localization using time reverse modeling
Kocur, G. K. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.10.021 · Cited by 16
Assessment of a damage model for wound composite structures by acoustic emission
Ramirez, J. P. B., Halm, D., & Grandidier, J.-C. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.01.093 · Cited by 15
Qian, G., Wu, Y., & Xu, M. (2019) · Applied Mathematical Modelling · doi:10.1016/j.apm.2019.03.012 · Cited by 14
Cited by
Yang, Z., Yang, H., Tian, T., Deng, D., Hu, M., Ma, J., Gao, D., Zhang, J., Ma, S., Yang, L., et al. (2023) · Ultrasonics · doi:10.1016/j.ultras.2023.107014 · Cited by 302
Self-citationJia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
State-of-the-Art Review on the Acoustic Emission Source Localization Techniques
Hassan, F., Mahmood, A. K., Yahya, N., Saboor, A., Abbas, M. Z., Khan, Z., & Rimsan, M. (2021) · IEEE Access · doi:10.1109/access.2021.3096930 · Cited by 109
Ai, L. M., Zhang, B., & Ziehl, P. H. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110216 · Cited by 91
Ai, L. M., Bayat, M., & Ziehl, P. H. (2023) · Measurement · doi:10.1016/j.measurement.2023.112659 · Cited by 63
Metadata
- Authors
- Yang, L., & Xu, F.
- Affiliations
- Southeast University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 141123-141142
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3045563552
- Cited by
- 32
- References
- 52
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 6 · 2023: 10 · 2022: 3 · 2021: 4
- FWCI
- 2.17
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51975117)
- Postgraduate Research and Practice Innovation Program of Jiangsu Province, China (KYCX20_0078)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
- Keywords
- acoustic emission source localization, stacked denoising autoencoder, metal plates, Q235B steel, 316L stainless steel, Bayesian information criterion, structural health monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.