The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Deep Learning Based Approach for Bearing Fault Diagnosis
Abstract
Bearing is one of the most critical components in most electrical and power drives. Effective bearing fault diagnosis is important for keeping the electrical and power drives safe and operating normally. In the age of Internet of Things and Industrial 4.0, massive real-time data are collected from bearing health monitoring systems. Mechanical big data have the characteristics of large volume, diversity, and high velocity. There are two major problems in using the existing methods for bearing fault diagnosis with big data. The features are manually extracted relying on much prior knowledge about signal processing techniques and diagnostic expertise, and the used models have shallow architectures, limiting their capability in fault diagnosis. Effectively mining features from big data and accurately identifying the bearing health conditions with new advanced methods have become new issues. This paper presents a deep learning-based approach for bearing fault diagnosis. The presented approach preprocesses sensor signals using short-time Fourier transform (STFT). Based on a simple spectrum matrix obtained by STFT, an optimized deep learning structure, large memory storage retrieval (LAMSTAR) neural network, is built to diagnose the bearing faults. Acoustic emission signals acquired from a bearing test rig are used to validate the presented method. The validation results show the accurate classification performance on various bearing faults under different working conditions. The performance of the presented method is also compared with other effective bearing fault diagnosis methods reported in the literature. The comparison results have shown that the presented method gives much better diagnostic performance, even at relatively low rotating speeds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reducing the dimensionality of data with neural networks
Hinton, G. E., & Salakhutdinov, R. R. (2006) · Science · doi:10.1126/science.1127647 · Cited by 20,928
Huang, R., Xi, L., Li, X., Liu, C., Qiu, H., & Lee, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.11.008 · Cited by 523
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
A neural-network-based detection of epilepsy
Nigam, V. P., & Graupe, D. (2004) · Neurological Research · doi:10.1179/016164104773026534 · Cited by 350
Paya, B. A., Esat, I. I., & Badi, M. N. M. (1997) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1997.0090 · Cited by 327
Mba, D. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102405059054 · Cited by 305
Hemmati, F., Orfali, W., & Gadala, M. S. (2016) · Applied Acoustics · doi:10.1016/j.apacoust.2015.11.003 · Cited by 159
Low speed bearing fault diagnosis using acoustic emission sensors
Hecke, B. V., Yoon, J. M., & He, D. (2015) · Applied Acoustics · doi:10.1016/j.apacoust.2015.10.028 · Cited by 134
Self-citationBearing defect diagnosis and acoustic emission
Morhain, A., & Mba, D. (2003) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/135065003768618614 · Cited by 119
A New Approach for Current Sensor Fault Diagnosis in PMSG Drives for Wind Energy Conversion Systems
Freire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2271992 · Cited by 115
Cited by
Predictive maintenance in the Industry 4.0: A systematic literature review
Zonta, T., da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106889 · Cited by 1,302
A review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Yang, B., Lei, Y., Jia, F., & Xing, S. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.12.051 · Cited by 879
Fault diagnosis of rolling bearings with recurrent neural network-based autoencoders
Liu, H., Zhou, J., Zheng, Y., Jiang, W., & Zhang, Y. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.04.005 · Cited by 606
Metadata
- Authors
- He, M., & He, D.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2017-05
- Volume
- 53
- Issue
- 3
- Pages
- 3057-3065
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2581853886
- Cited by
- 484
- References
- 21
- FWCI
- 23.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Deep Learning Based Approach for Bearing Fault Diagnosis. https://app.cochat.ai/papers/10.1109/tia.2017.2661250
- The paper
- He, M., & He, D. (2017). Deep Learning Based Approach for Bearing Fault Diagnosis. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2017.2661250
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.