Application of the Quasi-Static Memdiode Model in Cross-Point Arrays for Large Dataset Pattern Recognition
Open accessThe DOI matches its Crossref record; 98 of the 100 references it cites were found in a registry or an index.
Abstract
We investigate the use and performance of the quasi-static memdiode model (QMM) when incorporated into large cross-point arrays intended for pattern classification tasks. Following Chua's memristive devices theory, the QMM comprises two equations, one equation for the electron transport based on the double-diode circuit with single series resistance and a second equation for the internal memory state of the device based on the so-called logistic hysteron or memory map. Ex-situ trained memdiodes with different MNIST-like databases are used to establish the synaptic weights linking the top and bottom wire networks. The role played by the memdiode electrical parameters, wire resistance and capacitance values, image pixelation, connection schemes, signal-to-noise ratio and device-to-device variability in the classification effectiveness are investigated. The confusion matrix is used to benchmark the system performance metrics. We show that the simplicity, accuracy and robustness of the memdiode model makes it a suitable candidate for the realistic simulation of large-scale neural networks with non-idealities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![FIGURE 2 (a) Hysteron model with logistic ridge functions 0 C (Eq. 3) and 0 (Eq. 4). is the space of feasible states S . The red thick faded line superimposed to the hysteron model indicates the trajectory of the state variable inside from an initial ( S 1 ) to a final ( S 2 ) state. The inset in the left shows the equivalent circuit model for the current equation (1) including the series resistance. The diodes are driven by the memory state of the device and one diode is activated at a time. (b) Typical I -V characteristic for a memdiode obtained via simulation of the proposed model. Superimposed blue arrows indicate the current evolution. (c) Detail of the HRS (exponential) to LRS (linear) transition, showing a few intermediate states. Linear [13], [15], [16] and sinh() -like [34] models are superimposed for comparison.](https://figures.cochat.ai/paper-figures/99ebb1d0b1804254a3a09cbce52013e5/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-2.png)
![FIGURE 3 Experimental I -V loops of different materials reported in the literature fitted with the QMM model: (a) HfO 2 [43], (b) Al 2 O 3 [44], (c) MnO 3 [45], (d) CuO 2 [46], (e) La 1-x Cax MnO 3 [47] and (f) TaO X [48]. The QMM fitting parameters are shown for each case. As reference, the HRS and LRS curves are indicated in (a) and the SET and RESET points in (b). Note that in (a) a current compliance of 200 A was imposed to prevent permanent dielectric breakdown, which can be also represented by the QMM.](https://figures.cochat.ai/paper-figures/6c1c1d4b6f5e4e24985a5266543d4109/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-3.png)
![FIGURE 4 (a) Schematic representation of the Write-Verify procedure for programming the CPA memdiodes. The upper waveform stands for the alternating write and verify voltage pulses, while the lower plot represents the associated conductance changes. A simplified circuit schematic for the writing connection is indicated in the upper right inset. (b) Experimental and simulation results for the reset characteristics of SiO X from UCL (Data from [55]) using the QMM model. Notice the control of the intermediate memory states. The inset shows the input signal.](https://figures.cochat.ai/paper-figures/e78b36e9052047b88c65b25737081921/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-4.png)

![FIGURE 6 Samples of the three different images databases considered in this article. In all cases images are represented in 28 28 px. Pixel brightness (or intensity) is codified in 256 levels ranging from 0 (fully OFF, black) to 1 (fully ON, white). (a) MNIST database of handwritten numeric digits, (b) MNIST-F database [57] of fashion articles and (c) MNIST-K database [58] of handwritten Kanji Japanese ideograms.](https://figures.cochat.ai/paper-figures/76386b046ac548f6ae1bc7b0c800beb8/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-6.png)



![FIGURE 10 (a) CPA Power consumption vs. CPA size (in number of devices). Note that Power increases as R ON reduces from model plays ( C 1C 4). As reference, reported CPA power for other works [6], [8], [14], [79], [80] is also plotted. (b) Ratio between the memdiode power and the total CPA power consumption. (c) Obtained Signal-to-Noise ratio (SNR) for different model plays ( C 1C 4) as function of the line resistance. The marker color indicates the inference accuracy for each simulation case. Note that reduced R ON in C 1 comes at the cost of a reduced SNR and thereby limits accuracy.](https://figures.cochat.ai/paper-figures/2a51e4f775d7464195d73d287d867f52/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-10.png)
![FIGURE 11 (a) Impact of the wire resistance ( R W ) on the detection performance considering four different resistance windows corresponding to models plays C 1C 4. (b) Inference accuracy is plotted against the R W = R ON ratio showing a unified trend among all model plays. Confusion matrix for model C 2, with R W equal to (c) 0.1 , (d) 4.53 (16 nm [15]) and (e) 81.3 (10 nm [76]). In all cases CPAs are connected from both sides (DSC) and images are not downsized (image resolution: 28 28 px.).](https://figures.cochat.ai/paper-figures/cc97b971909546af861f1c673dd25017/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-11.png)
![FIGURE 12 (a) Expected inference latency for a CPA of 1Mb (1,000 1 : 000) as function of the process feature size, considering the model proposed by Meindl et al. in [76], [87], SPICE simulations considering the QMM, and the simplified circuital model depicted by Eq. 13. (b) Circuit schematic of a RRAM cell in a CPA structure considering the associated wire parasitic resistance and capacitance. (c) Schematic representation of the simplified model of Eq. 13. (d) Estimated Latency based on Eq. 13 as function of R OFF .](https://figures.cochat.ai/paper-figures/a448bb162a5944888ed8d69b54bb4f16/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-12.png)



![FIGURE 16 Performance metrics of the memdiode-based CPA simulated with the QMM, compared against the ideal Software case computed in MATLAB. 5 different databases are considered: MNIST [78], MNIST-F [57], MNIST-K [58], CIFAR-10 [94] and SVHN [95]. Each CPA is divided into 4 partitions to further reduced the impact of R W . Note that as R W tends to 0, the CPA mimics the MATLAB results.](https://figures.cochat.ai/paper-figures/7628afdcfa2c4b098fec55c0e71d1c2f/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-16.png)
![FIGURE 17 The computational cost (run-time and RAM memory usage) of the memdiode-based CPA implemented with the QMM model is compared against other memristor models reported by Yakopcic et al. [34], Laiho et al. [96] and the University of Michigan [97]. (a) Simulation run-time as function of the CPA size (in number of devices) increases quadratically. (b) Simulation RAM memory usage increases linearly with the CPA size. (c) Total CPU time normalised against the case of a resistor of fixed value to represent the programmed memristor. (d) Total RAM memory usage normalised against the resistor case (linear model). In both cases simulations were performed both in HSPICE and Fast-SPICE (FineSim) environments and for different image sizes.](https://figures.cochat.ai/paper-figures/74ee6cf51e1349db8c9c6804c7fcb080/application-of-the-quasi-static-memdiode-model-in-cross-point-arrays-for-large-figure-17.png)





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“For the case of the Quasi-static Memdiode Model (QMM) considered in refs. 250,253, this is done by adjusting the control parameter λ that runs between 0 (HRS) and 1 (LRS).”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [253]
The cited source says what the claim attributes to it.
In the citing paper
“As I0 increases in Eq. 14, the I-V curve changes its shape from exponential to linear through a continuum of states, as experimentally observed for this kind of devices253.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [253]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805 · cited 1×
“[78].”
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728 · cited 1×
“Moreover, although the Levenberg-Marquardt (LM) learning algorithm [64] provides the highest accuracy at the cost of the highest CPU run-time among those considered [63]–[70], the difference between the inference accuracy”
MethodLearning Multiple Layers of Features from Tiny Images
Krizhevsky, A. (2024) · doi:10.57702/zp44cu3g · Cited by 23,395
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828 · cited 2×
“both the positive and negative synaptic weights using a Verilog-A nonlinear memristor model [12].”
BackgroundMethodNumerical Methods for Unconstrained Optimization and Nonlinear Equations
Dennis, J. E., & Schnabel, R. B. (1996) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9781611971200 · Cited by 7,615
Fashion-MNIST: a Novel Image Dataset for Benchmarking Machine Learning Algorithms
Xiao, H., Rasul, K., & Vollgraf, R. (2017) · arXiv · doi:10.48550/arxiv.1708.07747 · Cited by 6,108
Function minimization by conjugate gradients
Fletcher, R. (1964) · The Computer Journal · doi:10.1093/comjnl/7.2.149 · Cited by 4,939
Reading digits in natural images with unsupervised feature learning
Netzer, Y. (2024) · doi:10.57702/e7wwo0zk · Cited by 4,149
A scaled conjugate gradient algorithm for fast supervised learning
Møller, M. F. (1993) · Neural Networks · doi:10.1016/s0893-6080(05)80056-5 · Cited by 4,052
A direct adaptive method for faster backpropagation learning: the RPROP algorithm
Riedmiller, M., & Braun, H. (2002) · IEEE International Conference on Neural Networks · doi:10.1109/icnn.1993.298623 · Cited by 3,917
Research works printed but not linked: 3
- 2010, Resistance Random Access Memory (RRAM)
- lecun, 1998, MNIST Handwritten Digit Database
- hagan, 2014, Neural Network Design
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“250,253, this is done by adjusting the control parameter λ that runs between 0 (HRS) and 1 (LRS).”
InfluentialSelf-citationIntegrated Memory Devices Based on 2D Materials
Xue, F., Zhang, C., Ma, Y., Wen, Y., He, X., Yu, B., & Zhang, X. (2022) · Advanced Materials · doi:10.1002/adma.202201880 · Cited by 98
Solution-processed memristors: performance and reliability
Pazos, S. M., Xu, X., Guo, T., Zhu, K., Alshareef, H. N., & Lanza, M. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00661-6 · Cited by 110
“For deeply scaled crossbar arrays, one needs to bear in mind that crossbar architectures bring many associated nonideali-ties, including wire resistance, sneak-paths and failed devices (stuck-at-faults) 100 .”
Self-citationYang, J., Yoon, A., Lee, D., Song, S., Jung, I. J., Lim, D., Jeong, H., Lee, Z., Lanza, M., & Kwon, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202309455 · Cited by 62
SPICE Implementation of the Dynamic Memdiode Model for Bipolar Resistive Switching Devices
Aguirre, F. L., Suñé, J., & Miranda, E. A. (2022) · Micromachines · doi:10.3390/mi13020330 · Cited by 59
Self-citationSynaptic plasticity features and neuromorphic system simulation in AlN-based memristor devices
Kwon, O., Lee, Y., Kang, M., & Kim, S. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164870 · Cited by 35
Nonmasking-based reservoir computing with a single dynamic memristor for image recognition
Wu, X., Lin, Z., Deng, J., Li, J., & Feng, Y. (2024) · Nonlinear Dynamics · doi:10.1007/s11071-024-09338-9 · Cited by 32
“In contrast, the cross-point arrays-based quasi-static memdiode model achieved recognition accuracies lower than 30% on thesetwodatasets[1].”
Nano‐Memristors with 4 mV Switching Voltage Based on Surface‐Modified Copper Nanoparticles
Liu, P., Hui, F., Aguirre, F. L., Saiz, F., Tian, L., Han, T., Zhang, Z., Miranda, E. A., & Lanza, M. (2022) · Advanced Materials · doi:10.1002/adma.202201197 · Cited by 25
Self-citationElectron Doping Effect in the Resistive Switching Properties of Al/Gd1–xCaxMnO3/Au Memristor Devices
Lähteenlahti, V., Schulman, A., Beiranvand, A., Huhtinen, H., & Paturi, P. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02963 · Cited by 33
Xbar-Partitioning: A Practical Way for Parasitics and Noise Tolerance in Analog IMC Circuits
Amin, M. H., Elbtity, M., & Zand, R. (2022) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2022.3222966 · Cited by 21
“Partitioning, in general, is a well-known method in IMC architectures which is mostly used to map large matrices in ML workload to smaller arrays of memristive crossbars [46], [54].”
BackgroundMethodInfluentialSPICE Simulation of RRAM-Based Cross-Point Arrays Using the Dynamic Memdiode Model
Aguirre, F. L., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. A. (2021) · Frontiers in Physics · doi:10.3389/fphy.2021.735021 · Cited by 17
“The possible impact of the learning method was discussed elsewhere [14] where it was demonstrated that no signi fi cant statistical differences in terms of the inference accuracy occur.”
BackgroundMethodInfluentialSelf-citationAguirre, F. L., Gomez, N. M., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. (2021) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea11010009 · Cited by 14
“Additionally, the use of devices with a higher ROFF/RON ratio has been shown to reduce the impact of the D2D variability [17].”
BackgroundMethodSelf-citationInterconnect Parasitics and Partitioning in Fully-Analog In-Memory Computing Architectures
Amin, M. H., Elbtity, M., & Zand, R. (2022) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas48785.2022.9937884 · Cited by 20
“where ε = 20ε0 is the dielectric permittivity of the inter-metal space, W and T are the width and thickness of the metal line, H = 20nm is the inter-metal layer spacing and S is the inter-wire spacing [12].”
BackgroundIntegration of Ag-based threshold switching devices in silicon microchips
Alharbi, O., Pazos, S. M., Zhu, K., Aguirre, F. L., Yuan, Y. J., Li, X., Wu, H., & Lanza, M. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100837 · Cited by 12
Self-citationMiranda, E. A., Piros, E., Aguirre, F. L., Kim, T., Schreyer, P., Gehrunger, J., Oster, T., Hofmann, K., Suñé, J., Hochberger, C., et al. (2023) · IEEE Electron Device Letters · doi:10.1109/led.2023.3298023 · Cited by 11
Self-citationAguirre, F. L., Piros, E., Kaiser, N., Vogel, T., Petzold, S., Gehrunger, J., Oster, T., Hochberger, C., Suñé, J., Alff, L., et al. (2022) · Micromachines · doi:10.3390/mi13112002 · Cited by 10
Self-citationIMAC-Sim: A Circuit-level Simulator For In-Memory Analog Computing Architectures
Amin, M. H., Elbtity, M., & Zand, R. (2023) · ACM Great Lakes Symposium on VLSI (GLSVLSI) · doi:10.1145/3583781.3590264 · Cited by 12
“Moreover, increased RW reduces the IMAC read margin that can impact its accuracy [11, 12].”
BackgroundStudy on Memristor-Based 3-D Convolutional Neural Network Adapting to Non-Ideal Effects
Dong, B., Li, P., Fu, Y., Chang, T., Li, Y., Miao, X., & He, Y. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3233552 · Cited by 6
“example, in practical deep MNNs, the parasitic resistance in the large memristor crossbar becomes non-negligible [19], [20].”
BackgroundMiranda, E. A., Piros, E., Aguirre, F. L., Kim, T., Schreyer, P., Gehrunger, J., Schwarz, T., Oster, T., Hofmann, K., Suñé, J., et al. (2024) · IEEE Electron Device Letters · doi:10.1109/led.2024.3368146 · Cited by 7
“In this letter, we evaluate the device behavior as a function of the selected memory state programming trajectory.”
MethodSelf-citationAguirre, F. L., Pazos, S. M., Palumbo, F., Morell, A., Suñé, J., & Miranda, E. A. (2021) · Electronics · doi:10.3390/electronics10192427 · Cited by 5
“The procedure originally proposed in [28] for creating and simulating the SLP or MLP used as case study is considered herein.”
BackgroundMethodResultInfluentialSelf-citationEvent-Driven Stochastic Compact Model for Resistive Switching Devices
Suñé, J., González, M. B., Saludes-Tapia, M., Campabadal, F., & Miranda, E. A. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3414370 · Cited by 4
“To implement the event-driven model, we depart from a continuous compact model which has been demonstrated to reproduce the device’s electrical properties [16] and to simulate large realistic neuromorphic crossbar circuits for pattern recognition [17].”
MethodSelf-citationStochastic compact model for memory and threshold switching memristors
Suñé, J., & Miranda, E. A. (2025) · APL Machine Learning · doi:10.1063/5.0255043 · Cited by 4
Self-citationLambertini, A., Zanotti, T., Pavan, P., Padovani, A., & Puglisi, F. M. (2025) · APL Machine Learning · doi:10.1063/5.0274233 · Cited by 3
Geopolymer memristor-based physical reservoir computing for digit recognition
Shakib, M. A., Maraj, J. J., Gao, Z., Ahmadipour, M., Montazami, R., Sarles, S. A., & Lamuta, C. (2025) · AIP Advances · doi:10.1063/5.0285689 · Cited by 3
Memristance and transmemristance in multiterminal memristive systems
Milano, G., Pilati, D., Michieletti, F., Cultrera, A., Ricciardi, C., & Miranda, E. A. (2026) · Scientific Reports · doi:10.1038/s41598-026-35671-7 · Cited by 5
“(9)) represents a first-order approximation valid in the low voltage regime, as commonly employed when modelling conventional two-terminal memristive devices 48 .”
Self-citationDynamic memdiode–driven Hopfield neural network for 3D CT encryption in IoMT
Sağbaş, M., & Mınaeı, S. (2026) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2026.118253 · Cited by 2
The potential of semiconducting oxides in comparison to insulating oxides for memristor applications
Rudrapal, K., & Daus, A. (2026) · APL Materials · doi:10.1063/5.0314546 · Cited by 2
Aguirre, F. L., Piros, E., Kaiser, N., Vogel, T., Petzold, S., Gehrunger, J., Oster, T., Hofmann, K., Hochberger, C., Suñé, J., et al. (2023) · APL Machine Learning · doi:10.1063/5.0143926 · Cited by 3
Self-citationAguirre, F. L., Palumbo, F., & Julian, P. M. (2020) · AJEA · doi:10.33414/ajea.5.778.2020
Self-citationGehrunger, J., & Hochberger, C. (2023) · Lecture notes in computer science · doi:10.1007/978-3-031-42921-7_5
Miranda, E. A., Piros, E., Aguirre, F. L., Kim, T., Schreyer, P., Gehrunger, J., Schwarz, T., Oster, T., Hofmann, K., Suñé, J., et al. (2025) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2025.3556856 · Cited by 3
“WiththeaidoftheDynamicMemdiodeModel (DMM)[12],[13],[14]anditsnovelimplementationintheLT-spicecircuitsimulatorusingtheMethodofElementarySolvers (MES) [15] we are able to clarify some crucial points about this challenging problem.”
Self-citationMiranda, E. A., Piros, E., Aguirre, F. L., Pérez, X., Kim, T., Schreyer, J. P., Gehrunger, J., Oster, T., Hofmann, K., Suñé, J., et al. (2025) · International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design · doi:10.1109/smacd65553.2025.11092034
“With the aid of the Dynamic Memdiode Model (DMM) [15-17] and its novel implementation in the LTspice circuit simulator using the Method of Elementary Solvers (MES) [18] we are able to provide some crucial hints about this challenging problem.”
Self-citationBehavioral SPICE model for memristive crosspoint arrays operating in the nonlinear transport regime
Pérez, X., Picos, R., Suñé, J., & Miranda, E. A. (2025) · Solid-State Electronics · doi:10.1016/j.sse.2025.109214
Self-citationIntermittency and Persistence of Switching Modes in HfO 2 -Based Memristors
Miranda, E. A., Cantudo, A., Jiménez-Molinos, F., Suñé, J., González, M. B., & Roldán, J. B. (2026) · IEEE Electron Device Letters · doi:10.1109/led.2026.3719434
“To support the experimental findings and their interpretation, simulations based on the dynamic memdiode model (DMM) [15], [16], [17] are reported, reproducing the observed mode transition and attributing its origin to the partial reconfiguration of the conductive filament.”
Self-citationAbrupt and Gradual Resistive Switching in Interface‐Modified IGZO Memristors
Rudrapal, K., Spieth, C., Oehme, M., Küster, K., Starke, U., & Daus, A. (2026) · Advanced Electronic Materials · doi:10.1002/aelm.70530
A Variability-Aware Compact Memristor Model for HfO 2 -based 1T1R ReRAM Devices
Nguyen, K. P., Schroedter, R., Ntinas, V. G., Quesada, E. P.-B., Pérez, E., Wenger, C., & Tetzlaff, R. (2026) · International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design · doi:10.1109/smacd70206.2026.11647838
“…as the Stanford-PKU model [4] or behavioral SPICE macro-models [8], achieve high simulation speeds but frequently lack accuracy in the non-linear low-voltage read regime and often rely on rigid, heuristic update rules that fail to capture the continuous dynamics of potentiation and depression [9].”
Metadata
- Authors
- Aguirre, F. L., Pazos, S. M., Palumbo, F., Sune, J., & Miranda, E.
- Affiliations
- Universitat Autònoma de Barcelona (ES)
- National Technological University (AR)
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 202174-202193
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3096521724
- Cited by
- 36
- References
- 100
- Citations by year
- 2026: 6 · 2025: 6 · 2024: 6 · 2023: 6 · 2022: 7 · 2021: 4 · 2020: 1
- FWCI
- 1.54
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- Dipòsit Digital de Documents de la UAB (Universitat Autònoma de Barcelona) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- CONICET Digital (CONICET) (submittedVersion, cc-by)
- Greater South Information System
- Funders
- Universidad Tecnolgica Nacional (PID-UTN CCUTIBA4764TC,, PID-UTN CCUTNBA5182, PID-UTN CCUTNBA6615, PID-UTN EIUTIBA4395TC3, PID-UTN MATUNBA4936)
- Electronic Components and Systems for European Leadership (WAKeMeUP 783176)
- Consejo Nacional de Investigaciones Cientficas y Tcnicas (PIP-11220130100077CO)
- Ministerio de Ciencia Tecnologa e Innovacin Productiva (PICT 2013/1210, PICT 2016/0579, PME 2015-0196)
- Ministerio de Ciencia e Innovacin (TEC2017-84321-C4-4-R)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Computer Science › Artificial Intelligence › Neural Networks and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Keywords
- cross-point array, in-memory computing, pattern classification, MNIST, synaptic weights, device-to-device variation, neuromorphic hardware
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.