CubeSat mission design based on a systems engineering approach
The DOI matches its Crossref record; 12 of the 13 references it cites were found in a registry or an index.
Abstract
With the exception of the CubeSat specification, CubeSat design and development approaches have been mostly ad hoc, which has questioned their reliability. A systems engineering approach, based on the guidelines of NASA's Systems Engineering Handbook has been developed for CubeSats to facilitate systematic design, development and address their reliability, traceability, and reusability. The CubeSat systems engineering approach, developed as a repeatable process, uses a top-down design methodology to translate mission definitions into basic building blocks, components, interfaces and tasks, that then facilitate a bottom-up development and fabrication process. Some of the design tools (e.g., N2 diagram) described in NASAs Systems Engineering Handbook are utilized early in the design phase to identify potential conflicts in the mechanical and electrical interfaces. A novel subsystem level flowdown, which transcribes the system level requirements into identifiable CubeSat subsystems, (i.e., building blocks) is described. Utilizing this approach yields full traceability from mission concept to subsystem component to flight software. Additionally, the approach facilitates the estimation of the mission overhead in terms of power, telemetry, and computation associated with each component, interface, and task.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In the CubeSat domain, formal analyses become necessary, especially because CubeSat design approaches have been mostly ad hoc, with severe implications for their reliability [3].”
From A Reliability Engineering Approach for Managing Risks in CubeSats (2018) · cites this paper as [3]
Citations
Cites
Higgins, T. J. (1966) · Journal of the Franklin Institute · doi:10.1016/0016-0032(66)90450-9 · Cited by 797
(2000) · Digital Commons - USU (Utah State University) · Cited by 453
Development of the standard CubeSat deployer and a CubeSat class PicoSatellite
Puig-Suari, J., Turner, C., & Ahlgren, W. (2002) · 2001 IEEE Aerospace Conference Proceedings (Cat. No.01TH8542) · doi:10.1109/aero.2001.931726 · Cited by 248
CubeSat: The Pico-Satellite Standard for Research and Education
Chin, A., Coelho, R., Nugent, R., Munakata, R., & Puig-Suari, J. (2008) · AIAA SPACE 2008 Conference & Exposition · doi:10.2514/6.2008-7734 · Cited by 158 · cited 1×
“The power-up and deploy operation addresses a CubeSat’s ability, as secondary payload, of not interfering with the primary payload during the initial minutes of launch [22].”
BackgroundCubeSat design for LEO-based Earth science missions
Waydo, S., Henry, D., & Campbell, M. (2003) · Proceedings, IEEE Aerospace Conference · doi:10.1109/aero.2002.1036863 · Cited by 61
Flight Results from the GeneSat-1 Biological Microsatellite Mission
Kitts, C., Ronzano, K., Rasay, R., Mas, I., Williams, P., Mahacek, P., Minelli, G., Hines, J. W., Agasid, E. F., Friedericks, C. R., et al. (2007) · Digital Commons - USU (Utah State University) · Cited by 46
Schaffner, J. (2002) · Digital Commons - USU (Utah State University) · Cited by 34
Initial Flight Results from the PharmaSat Biological Microsatellite Mission
Kitts, C., Ronzano, K., Rasay, R., Mas, I., Acain, J., Neumann, M., Bica, L., Mahacek, P., Minelli, G., Beck, E., et al. (2009) · Digital Commons - USU (Utah State University) · Cited by 29
Microcontroller design for the Montana EaRth Orbiting Pico-Explorer (MEROPE) Cubesat-class satellite
Larsen, B. A., Klumpar, D. M., Wood, M. S., Hunyadi, G., Jepsen, S. M., & Obland, M. D. (2003) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2002.1036869 · Cited by 9
Biomolecule-mineral interactions in the geochemical environment on early earth and in the human body
Sahai, N. (2011) · AGU Fall Meeting Abstracts · Cited by 4
Research works printed but not linked: 16
- leve, 2008, Development of the Spacecraft Orientation Buoyancy Experimental Kiosk
- allgeier, 2010, The role of universities in developing a responsive space industry, 5th Responsive Space Conference
- 2010, Office of the Cheief Technologist Small Spacecraft Program
- leve, 2007, Astreci Detailed Design Report Funsat Iv Design Competition
- allgeier, 2010, Swampsat-A technology demonstrator for operational responsive space, Proceedings of CASI ASTRO 2010 15th CASI (Canadian Aeronautics and Space Institute) Conference
- jablonski, 2008, Deorbiting of Microsatellites in Low Earth Orbit (Leo)
- 2007, NASA
- asundi, 2011, Cubesat System Design Based on Methodologies Adopted for Developing Wireless Robotic Platform
- nagabhushan, 2009, Development of Control Moment Gyroscopes for Attitude Control of Small Satellites
- nugent, 2008, The cubesat: The picosatellite standard for research and education, Aerospace Engineering, 805, 756
- munkata, 2009, CubeSat Design Specification Rev 12
- galysh, 2008, Katysat Radio Board Rev 2 4
- bourne, 2009, NRO CubeSat Experiments (Qb X)
- kitts, 2006, The genesat-1 microsatellite mission: A challenge in small satellite design, Proc 20th Annual AIAA/USU Conf on Small Satellites Logan UT
- long, 2002, A cubesat derived design for a unique academic research mission in earthquake signature detection, Proc AIAA Small Satellite Conference
- minelli, 2010, O/oreos: A multi-payload technology demonstration, Proceedings of the 24th Annual AIAA/USU Conference on Small Satellites
Cited by
Developing a CubeSat Model-Based System Engineering (MBSE) Reference Model - interim status
Kaslow, D., Anderson, L., Asundi, S., Ayres, B. J., Iwata, C. K., Shiotani, B., & Thompson, R. E. (2015) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2015.7118965 · Cited by 60
Self-citationReconfigurable S-band patch antenna system for cubesat satellites
Pittella, E., Pisa, S., Pontani, M., Nascetti, A., D'Atanasio, P., Zambotti, A., & Hadi, H. (2016) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/maes.2016.150153 · Cited by 41
A Reliability Engineering Approach for Managing Risks in CubeSats
Menchinelli, A., Ingiosi, F., Pamphili, L., Marzioli, P., Patriarca, R., Costantino, F., & Piergentili, F. (2018) · Aerospace · doi:10.3390/aerospace5040121 · Cited by 35
Agile methodologies applied to Integrated Concurrent Engineering for spacecraft design
Álvarez, J. M., & Roibás-Millán, E. (2021) · Research in Engineering Design · doi:10.1007/s00163-021-00371-y · Cited by 23
Asundi, S., & Fitz-Coy, N. G. (2013) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2013.6496901 · Cited by 22
Self-citation
Metadata
- Authors
- Asundi, S. A., & Fitz-Coy, N. G.
- Affiliations
- Tuskegee University (US)
- University of Florida (US)
- ORCID
- Fitz-Coy, N. G.
- Venue
- 2013 IEEE Aerospace Conference
- Publisher
- IEEE
- Published
- 2013-03
- Pages
- 1-9
- ISSN
- 1095-323X (ISSN-L)
- OpenAlex
- W2110815513
- Cited by
- 35
- References
- 13
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 2 · 2023: 7 · 2022: 1 · 2021: 2 · 2020: 1 · 2019: 2 · 2018: 3 · 2016: 5 · 2015: 2 · 2014: 3 · 2013: 1
- FWCI
- 6.47
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE Aerospace Conference (AERO) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
- Physical Sciences › Engineering › Control and Systems Engineering › Systems Engineering Methodologies and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Space Technology and Applications
- Keywords
- CubeSat, systems engineering, mission design, top-down design, bottom-up development, requirements traceability, flight software, small satellites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CubeSat mission design based on a systems engineering approach. https://app.cochat.ai/papers/10.1109/aero.2013.6496900
- The paper
- Asundi, S. A., & Fitz-Coy, N. G. (2013). CubeSat mission design based on a systems engineering approach. 2013 IEEE Aerospace Conference. https://doi.org/10.1109/aero.2013.6496900
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.