The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Capacitive power transfer for contactless charging
Abstract
The simplicity and low cost of capacitive interfaces makes them very attractive for wireless charging stations. Major benefits include low electromagnetic radiation and the amenability of combined power and data transfer over the same interface. We present a capacitive power transfer circuit using series resonance that enables efficient high frequency, moderate voltage operation through soft-switching. An included analysis predicts fundamental limitations on the maximum achievable efficiency for a given amount of coupling capacitance and is used to find the optimum circuit component values and operating point. Automatic tuning loops ensure the circuit operates at the optimum frequency and maximum efficiency over a wide range of coupling capacitance and load conditions. An example interface achieves near 80% efficiency at 3.7 W with only 63pF of coupling capacitance. An automatic tuning loop adjusts the frequency from 4.2 MHz down to 4MHz to allow for 25% variation in the nominal coupling capacitance. The duty cycle is also automatically adjusted to maintain over 70% efficiency for light loads down to 0.3 W.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Krein, P. T., & Balog, R. S. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802723 · Cited by 186
Capacitive coupling for power and data telemetry to implantable biomedical microsystems
Sodagar, A. M., & Amiri, P. (2009) · 2009 4th International IEEE/EMBS Conference on Neural Engineering · doi:10.1109/ner.2009.5109320 · Cited by 163
Effect of switch capacitance on zero-voltage switching of resonant converters
Sabate, J. A., Farrington, R. W., Jovanovic, M. M., et al. (2003) · PESC record · doi:10.1109/pesc.1992.254670 · Cited by 36
Power flow control of a capacitively coupled contactless power transfer system
Liu, C., & Hu, A. P. (2009) · doi:10.1109/iecon.2009.5415012 · Cited by 33
Cited by
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Planar Wireless Charging Technology for Portable Electronic Products and Qi
Hui, S. Y. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2246531 · Cited by 648
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Overview of wireless power transfer technologies for electric vehicle battery charging
Musavi, F., & Eberle, W. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0047 · Cited by 417
Review of static and dynamic wireless electric vehicle charging system
Panchal, C., Stegen, S., & Lu, J. (2018) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2018.06.015 · Cited by 414
Metadata
- Authors
- Kline, M., Izyumin, I., Boser, B., & Sanders, S.
- Venue
- 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2011-03
- Pages
- 1398-1404
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2153771143
- Cited by
- 277
- References
- 5
- FWCI
- 15.22
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.