Methodology for switching characterization evaluation of wide band-gap devices in a phase-leg configuration
The DOI matches its Crossref record.
Abstract
Double pulse tester (DPT) is a widely accepted method to evaluate the switching behavior of power devices. Considering the high switching-speed capability of wide band-gap (WBG) devices, the test results become significantly sensitive to the alignment of voltage and current (V-I) measurement. Also, because of the shoot-through current induced by Cdv/dt, during the switching transient of one device, the switching losses of its complementary device in the phase-leg is non-negligible. This paper summarizes the key issues of DPT, including layout design, measurement considerations, grounding effects and data processing. Among them, the latest probes for switching waveform measurement are compared, the methods of V-I alignment are discussed, and the impact of grounding effects induced by probes on switching waveforms are investigated. Also, for the WBG devices in a phase-leg configuration, a practical method is proposed for switching loss evaluation by calculating the difference between the input energy supplied by a dc capacitor and the output energy stored in a load inductor. Based on a phase-leg power module built with 1200 V SiC MOSFETs, the test results show that regardless of V-I timing alignment, this method can accurately indicate the switching losses of both the upper and lower switches by detecting only one switching current.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259
Self-citationMethodology for Wide Band-Gap Device Dynamic Characterization
Zhang, Z., Guo, B., Wang, F. F., Jones, E. A., Tolbert, L. M., & Blalock, B. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2655491 · Cited by 287
Self-citationWang, H., Wei, J., Xie, R., Liu, C., Tang, G., & Chen, K. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2610460 · Cited by 283
A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151
Ding, X., Du, M., Duan, C., Guo, H., Xiong, R., Xu, J., Cheng, J., & Chi kwong Luk, P. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2765670 · Cited by 138
“Subsequently, the actual switching performances of the SiC and Si are tested when the devices are used in the traction system, instead of using the conventional switching performance evaluation methodology of double pulse test (DPT), which generally results in overestimations [32]–[37].”
Method
Metadata
- Authors
- Zhang, Z., Guo, B., Wang, F., Tolbert, L. M., Blalock, B. J., Liang, Z., & Ning, P.
- Venue
- 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014
- Publisher
- IEEE
- Published
- 2014-03
- Pages
- 2534-2541
- OpenAlex
- W2096760328
- Cited by
- 86
- References
- 0
- FWCI
- 17.47
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Methodology for switching characterization evaluation of wide band-gap devices in a phase-leg configuration. https://app.cochat.ai/papers/10.1109/apec.2014.6803660
- The paper
- Zhang, Z., Guo, B., Wang, F., Tolbert, L. M., Blalock, B. J., Liang, Z., & Ning, P. (2014). Methodology for switching characterization evaluation of wide band-gap devices in a phase-leg configuration. 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014. https://doi.org/10.1109/apec.2014.6803660
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.