New Surface Mount SiC MOSFETs Enable High Efficiency High Power Density Bi-directional On-Board Charger with Flexible DC-link Voltage
The DOI matches its Crossref record; 6 of the 7 references it cites were found in a registry or an index.
Abstract
On-board chargers (OBCs) in Electric Vehicles (EVs) have been one of the first applications to drive adoption of SiC MOSFETs. Typically, OBC system designers utilize a TO247 package because of its power dissipation capability, but that comes with certain risks. The assembly process for TO247 package system is very labor intensive and human error can reduce reliability by placing stress on the solder joint and bending leads. Surface mount (SMT) devices are produced by an automated process, which increases their reliability, but the thermal design is of big concern. This paper investigates a 6.6kW bi-directional on-board charger utilizing a SiC MOSFET in an SMT TO263-7L package and Printed Circuit Board (PCB) with AlN inlay. A prototype with switching frequency of 67kHz for a totem pole PFC converter and 200kHz for a CLLC resonant converter is demonstrated with 36W/in3 power density and above 97% system peak efficiency for both charging and discharging mode. All SiC MOSFETs in the TO263-7L surface mount package meet thermal requirement on a 65°C cooling plate.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Chen, W., Rong, P., & Lu, Z. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037099 · Cited by 464
Self-citationLi, B., Lee, F. C., Li, Q., & Liu, Z. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931228 · Cited by 105
A bridgeless totem-pole interleaved PFC converter for plug-in electric vehicles
Tang, Y., Ding, W., & Khaligh, A. (2016) · 2016 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2016.7467909 · Cited by 88
A comparison of thermal vias patterns used for thermal management in power converter
Gautam, D. S., Musavi, F., Wager, D., & Edington, M. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646981 · Cited by 19
Thermal management of a low-cost 2kW solar inverter
Lefevre, G., Degrenne, N., & Mollov, S. V. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6911026 · Cited by 8
Analog Based High Efficiency 2 KW Totem Pole PFC Converter Using Surface Mount SIC MOSFET's
Shao, J., Agrawal, B., Bathula, V. S., Mangal, N., & Moxey, G. (2018) · Cited by 4
Self-citation
Cited by
A Review of Bidirectional On-Board Chargers for Electric Vehicles
Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3069448 · Cited by 390
“Moreover, bidirectional OBCs would allow EV owners to use their vehicles for other purposes like providing vehicle-to-home (V2H) or vehicle-to-load (V2L) power during grid outage or vehicle-to-vehicle (V2V) function in case of an emergency [14]–[16].”
BackgroundBidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
“In [100], the design was improved by adopting liquid cooling, TO-263 SiC MOSFET s, and a ceramic-embedded (AlN) inlay PCB for increased isolation and thermal conductivity, albeit at a higher cost.”
MethodYuan, X., Laird, I., & Walder, S. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3024862 · Cited by 252
“[111].”
A review on energy efficient technologies for electric vehicle applications
Yadlapalli, R. T., Kotapati, A., Kandipati, R., & Koritala, C. S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104212 · Cited by 168
Design of a 22-kW Transformerless EV Charger With V2G Capabilities and Peak 99.5% Efficiency
Jahnes, M., Zhou, L., Eull, M., Wang, W., & Preindl, M. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3192697 · Cited by 44
Metadata
- Authors
- Wei, C., Shao, J., Agrawal, B., Zhu, D., & Xie, H.
- Affiliations
- Wolfspeed, Inc. (United States) (US)
- Cree (China) (CN)
- Venue
- 2019 IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2019-03
- Pages
- 1904-1909
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2946876325
- Cited by
- 31
- References
- 7
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 8 · 2023: 3 · 2022: 7 · 2021: 3 · 2020: 5 · 2019: 1
- FWCI
- 6.37
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Keywords
- SiC MOSFET, surface mount packaging, on-board charger, bidirectional power flow, electric vehicles, CLLC resonant converter, power density, thermal design, charging and discharging efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New Surface Mount SiC MOSFETs Enable High Efficiency High Power Density Bi-directional On-Board Charger with Flexible DC-link Voltage. https://app.cochat.ai/papers/10.1109/apec.2019.8721866
- The paper
- Wei, C., Shao, J., Agrawal, B., Zhu, D., & Xie, H. (2019). New Surface Mount SiC MOSFETs Enable High Efficiency High Power Density Bi-directional On-Board Charger with Flexible DC-link Voltage. 2019 IEEE Applied Power Electronics Conference and Exposition (APEC). https://doi.org/10.1109/apec.2019.8721866
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.