Performance comparison of 1200V 100A SiC MOSFET and 1200V 100A silicon IGBT
Open accessThe DOI matches its Crossref record.
Abstract
This paper presents the characteristics of the first commercial 1200V 100A SiC MOSFET module and compares it with state-of-the-art silicon IGBT with the same rating. The results show that the 1200V SiC MOSFET has faster switching speed and much lower loss compared with silicon IGBT. Moreover, the silicon IGBT switching loss will increase significantly for higher operation temperature, while the SiC MOSFET switching loss is almost the same for different temperature. A loss model has been implemented in PLECs in order to simulation the losses. An 11kW singlephase inverter prototype with 600V dc bus and 380Vac output voltage has been built for evaluating and comparing the SiC MOSFET and Si IGBT performance. The test results match with the simulation very well and show that with 40 kHz switching frequency the inverter efficiency can be increased to 98.5% from 96.5% if replacing the Si IGBT with the SiC MOSFET module.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Influences of Device and Circuit Mismatches on Paralleling Silicon Carbide MOSFETs
Li, H., Munk-Nielsen, S., Wang, X., Maheshwari, R., Beczkowski, S., Uhrenfeldt, C., & Franke, W.-T. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408054 · Cited by 306
“Compared with Silicon (Si) Insulated Gate Bipolar Transistors (IGBTs), SiC MOSFETs have no tail current due to their unipolar structure and thus allowing reduced switching losses and higher switching frequency [5], [7]-[10].”
BackgroundModeling and Analysis of SiC MOSFET Switching Oscillations
Liu, T., Ning, R., Wong, T., & Shen, Z. J. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2587358 · Cited by 265
Akagi, H., Kinouchi, S.-I., & Miyazaki, Y. (2016) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2016.00004 · Cited by 84
“2-kV SiC-MOSFET/SBD modules, thus leading to higher conversion efficiencies and/or higher switching frequencies [16], [17].”
BackgroundComparison of 1700-V SiC-MOSFET and Si-IGBT Modules Under Identical Test Setup Conditions
Fuentes, C. D., Kouro, S., & Bernet, S. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2934713 · Cited by 52
A Single-Stage Isolated Resonant SiC DC/AC Inverter for Efficient High-Power Applications
Tayebi, S. M., Xu, W., Wang, H., Yu, R., Guo, Z., & Huang, A. Q. (2020) · 2020 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec39645.2020.9124343 · Cited by 26
Self-citation
Metadata
- Authors
- Wang, G., Wang, F., Magai, G., Lei, Y., Huang, A., & Das, M.
- Venue
- 2013 IEEE Energy Conversion Congress and Exposition
- Publisher
- IEEE
- Published
- 2013-09
- Pages
- 3230-3234
- OpenAlex
- W2087343356
- Cited by
- 117
- References
- 0
- FWCI
- 8.95
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.