A study of dynamic high voltage output charge measurement for 15 kV SiC MOSFET
The DOI matches its Crossref record.
Abstract
Newly developed 15 kV silicon carbide (SiC) power MOSFETs with fast switching capability enable the reduction of size, weight and complexity of medium voltage power converters. In medium voltage and high frequency applications, zero voltage switching (ZVS) is necessary since significant amount of energy is stored in MOSFETs' parasitic output capacitors. Recovering these energy is important for high conversion efficiency while ZVS also reduces the dV/dt significantly in these devices. To guarantee complete ZVS, it is crucial to accurately characterize the output charge of devices. In this paper, existing high voltage capacitance and output charge measurement techniques are reviewed. A dynamic half-bridge test method for 15kV SiC MOSFETs' output charge measurement is thoroughly analyzed and experimentally verified up to 6 kV. Output capacitance model is then derived using the measured results. The test circuit not only reflects the realistic ZVS scenario, but also achieves high accuracy (<;1% error) without resorting to special equipment or complex configuration which are usually necessary in high voltage test. System level design consideration, error analysis and accuracy certification for this high voltage tester is also given in the paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
15 kV SiC MOSFET: An Enabling Technology for Medium Voltage Solid State Transformers
FREEDM Systems Center, N. C. S. U., & Huang, A. Q. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00012 · Cited by 182
“[23] proposed a new test circuit that not only reflects the realistic ZVS scenario, but also achieves high accuracy (<1% error).”
BackgroundMethodSelf-citationZhu, Q., Wang, L., Huang, A. Q., Booth, K., & Zhang, L. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2829174 · Cited by 155
Self-citationZhu, Q., Wang, L., Chen, D., Zhang, L., & Huang, A. Q. (2017) · 2017 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095938 · Cited by 32
“Paper [26] proposed a very accurate method to measure the output charge of MOSFETs in MV range.”
MethodSelf-citationXu, W., Guo, Z., Tayebi, S. M., Rajendran, S., Sun, A., Yu, R., & Huang, A. Q. (2020) · 2020 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec39645.2020.9124401 · Cited by 28
Self-citation
Metadata
- Authors
- Wang, L., Zhu, Q., Yu, W., & Huang, A. Q.
- Venue
- 2016 IEEE Energy Conversion Congress and Exposition (ECCE)
- Publisher
- IEEE
- Published
- 2016-09
- Pages
- 1-7
- OpenAlex
- W2588094093
- Cited by
- 18
- References
- 0
- FWCI
- 6.12
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.