The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fatigue life models for SnAgCu and SnPb solder joints evaluated by experiments and simulation
Abstract
In recent years, many solder fatigue models have been developed to predict the fatigue life of solder joints under thermal cycle conditions. While a variety of life prediction models have been proposed for near eutectic SnPb(Ag)-solder joints in the literature, not enough work has been reported in extending these models to lead-free soldered assemblies. The development of lie prediction models requires a deep insight into failure modes, constitutive models for the themnomechanical behavior of solders and an experimental reliability database. This is needed for the correlation of experimentally determined cycles-to-failure to simulation results by fmiteelement analysis. This paper describes in detail the life-prediction models of SnPh(Ag) and SnAgCu solder joints for thermal cycle conditions. To obtain reliable FEM input and to verify simulation results, a variety of material testing and experimental fatigue data is necessary. The accuracy of lieprediction tools has also become critically important, as the designs need to he evaluated and improved with a high degree of reliability, not through relative comparison but by providing absolute numbers. This work deals with the effect of different solder interconnect alloys (Sn59Pb40Agl and Sn95.5Ag3.8Cu0.7) and the effect of different package types (PBGAs, CSPs, Flip Chip on FR-4 with and without underfill) on the fatigue life. Different temperature cycling conditions are applied.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deformation of PbSn eutectic alloys at relatively high strain rates
Grivas, D., Murty, K. L., & Morris, J. W., Jr. (1979) · Acta Metallurgica · doi:10.1016/0001-6160(79)90106-8 · Cited by 82
Cited by
Syed, A. (2004) · 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546) · doi:10.1109/ectc.2004.1319419 · Cited by 359
The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability
Bosco, N., Silverman, T. J., & Kurtz, S. (2016) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2016.2598255 · Cited by 42
Metadata
- Authors
- Schubert, A., Dudek, R., Auerswald, E., Gollbardt, A., Michel, B., & Reichl, H.
- Venue
- 53rd Electronic Components and Technology Conference, 2003. Proceedings.
- Publisher
- IEEE
- Published
- 2003
- Pages
- 603-610
- ISSN
- 2766-8401 (ISSN-L)
- OpenAlex
- W2170052953
- Cited by
- 391
- References
- 1
- FWCI
- 24.69
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.