Multiphase integrated on-board battery chargers for electrical vehicles
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The paper considers on-board battery charging of electrical vehicles (EVs) using a multiphase voltage source and a multiphase propulsion motor. The multiphase inverter and the multiphase machine are fully integrated into the charging process. The proposed integrated on-board battery charger has an advantage of unity power factor operation with no torque production in the machine during the charging mode. The principle of the charging mode operation is based on the additional degrees of freedom that exist in multiphase machines. It is shown that they can be conveniently utilised to achieve charging through the machine's stator winding with zero electromagnetic torque. Detailed theoretical analysis is reported for a five-phase system, with a subsequent generalization to other multiphase systems with other higher odd numbers of phases. A mathematical model of a multiphase voltage source rectifier (VSR) is developed, its control in the charging mode is discussed, and the concept is validated by simulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669 · cited 1×
“A majority of EVs at present use a machine of induction type for propulsion [6], although permanent magnet synchronous machines are also a common choice.”
BackgroundGrid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345
Cited by
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
“Integrated chargers on the basis of an asymmetrical six-phase [75], a five-phase [76], and a symmetrical six-phase [77] power supply are demonstrated in the literature.”
BackgroundOn-board bidirectional battery chargers topologies for plug-in hybrid electric vehicles
Fahem, K., Chariag, D. E., & Sbita, L. (2017) · 2017 International Conference on Green Energy Conversion Systems (GECS) · doi:10.1109/gecs.2017.8066189 · Cited by 79
“Another topology of on-board integrated chargers is reported in [34] using multiphase machine.”
BackgroundAn integrated battery charger for EVs based on a symmetrical six-phase machine
Subotic, I., & Levi, E. (2014) · 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864937 · Cited by 24
“However, there are relatively few solutions that enable integrated fast charging with induction and synchronous propulsion motors [2-9].”
BackgroundMethodSelf-citationThree Phase High Power Integrated Battery Charger for Plugin Electric Vehicles
Ali, S. Q., Mascarella, D., Joos, G., Coulombe, T., & Cyr, J.-M. (2015) · 2015 IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2015.7353033 · Cited by 22
Metadata
- Authors
- Subotic, I., Levi, E., Jones, M., & Graovac, D.
- Venue
- 2013 15th European Conference on Power Electronics and Applications (EPE)
- Publisher
- IEEE
- Published
- 2013-09
- Pages
- 1-10
- OpenAlex
- W2167448188
- Cited by
- 19
- References
- 2
- FWCI
- 3.66
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiphase integrated on-board battery chargers for electrical vehicles. https://app.cochat.ai/papers/10.1109/epe.2013.6631935
- The paper
- Subotic, I., Levi, E., Jones, M., & Graovac, D. (2013). Multiphase integrated on-board battery chargers for electrical vehicles. 2013 15th European Conference on Power Electronics and Applications (EPE). https://doi.org/10.1109/epe.2013.6631935
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.