The DOI matches its Crossref record.
Harmonic Reduction in Induction Motor Using Harmonic Injection Method and Passive Filter: A Comparison
Abstract
A harmonic represents an integral multiple of fundamental frequency that is caused by nonlinear loads in a power system. Examples of loads causing nonlinearity are solid state rectifiers, saturation in magnetic devices etc. The presence of harmonics results in power quality issues in power system. And it leads to increased heating in the equipment and conductors, misfiring in variable speed drives and torque pulsations in motor etc. In this paper, an attempt has been made to reduce harmonics in an induction motor (an important component of a typical power system) existing either in current, voltage, space and time parameters using harmonic injection method. Firstly, harmonics injection method cancels up to 50th harmonics and secondly, it can achieve harmonic distortion level up to or less than 3% THD. In this paper, modeling and simulation of harmonic injection method is done to eliminate harmonics in an induction motor using MATLAB/SIMULINK environment. Superiority of the proposed method is established by comparing the results obtained with passive filter.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 5
- 10.1109/TPEL.2013.2294909 · DOI
- ibzarzynal, 2013, Harmonic Current Reduction of Three-Phase Rectifier Based on Modified Line Injection Technique, The First International Conference of Electrical Communication Computer Power and Control Engineering
- 10.1109/TPEL.2014.2344693 · DOI
- 10.1109/PEDG.2010.5545833 · DOI
- eltamaly, 2012, A Novel Harmonic Reduction Technique for Controlled Converter by Third Harmonic Current Injection, IEEE International Conference on Control System Computing and Engineering
Cited by
Sorted by citations
Kadir Sheikh, S., Jain, M., & Chandrakant Tapre, P. (2025) · Tehnički glasnik · doi:10.31803/tg-20230822132129 · Cited by 2
“In order to achieve harmonic distortion levels up to or less than 3% THD, harmonics injection method first cancels up to the 50th harmonic [11].”
Metadata
- Authors
- Ranga, P., & Mittal, M.
- Affiliations
- National Institute of Technology Kurukshetra (IN)
- Venue
- 2020 First IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA)
- Publisher
- IEEE
- Published
- 2020-06-24
- Pages
- 1-5
- OpenAlex
- W3096227494
- Cited by
- 4
- References
- 0
- Citations by year
- 2025: 1 · 2024: 1 · 2021: 2
- FWCI
- 0.70
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Power Quality and Harmonics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- harmonic compensation, induction motor, harmonic injection, passive filters, power quality, total harmonic distortion, nonlinear loads, current harmonics, voltage harmonics, space harmonics, time harmonics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
