Cascaded multilevel SST medium voltage converter for solar applications
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Most of the large-scale PV power plants (solar farms) are based on central inverters, in which the PV modules are concentrated in few maximum power point trackers and connected to the grid through three phase inverters. Although this topology has typically high efficiency, it has limited performance in terms of capturing all the power available from the PV modules. This paper proposes a cascaded multilevel converter based on solid state transformers (SST) technology, in which multiple high frequency transformers replace the bulky medium-voltage line-frequency function. In the proposed alternative, the converter grid front-end consists of a series connection of H-bridge inverters supplied by independent PV module arrays through solid state transformers. Among the many advantages of the proposed solution, it is important to point out: multiple MPP trackers, reduced size and weight, improved reliability and conversion efficiency and easier maintenance. The proposed SST based converter topology for PV power plants and its main design and control issues is addressed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The application of SST in solar PV can also be found in [55], [122] where SST with solar PV brings many benefits, such as reduced size and weight, enhanced reliability, easier maintenance, voltage amplitude improvement the grid current quality enhancement.”
From State of the Art of Solid-State Transformers: Advanced Topologies, Implementation Issues, Recent Progress and Improvements (2020) · cites this paper as [122]
Citations
Cites
A new approach to enhance power quality for medium voltage AC drives
Hammond, P. W. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.567113 · Cited by 857
Villanueva, E., Correa, P., Rodriguez, J., & Pacas, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029579 · Cited by 795
Review of solid state transformer in the distribution system: From components to field application
She, X., Burgos, R., Wang, G., Wang, F., & Huang, A. Q. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342269 · Cited by 241 · cited 1×
“Developed originally for AC-AC applications with the same input and output frequencies [5-7], the Solid State Transformer – SST – is based on a high-frequency AC link and a high-frequency transformer.”
BackgroundDas, M. K., Capell, C., Grider, D. E., Leslie, S., Ostop, J., Raju, R., Schutten, M., Nasadoski, J., & Hefner, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6064129 · Cited by 226 · cited 1×
“The proposed converter operates as the conventional one and, even in such condition, it has advantages such as reduced weight and volume and also easy maintenance, due to its modular construction [10-12].”
BackgroundEnhancing the reliability of modular medium-voltage drives
Hammond, P. W. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.803172 · Cited by 176 · cited 2×
“Developed first by Peter Hammond [3]-[9], a cascaded multilevel topology is proposed to medium voltage motor drive applications.”
BackgroundElasser, A., Agamy, M. S., Sabate, J. A., Steigerwald, R. L., Fisher, R., & Todorovic, M. H. (2010) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2010.5675108 · Cited by 87 · cited 1×
“It is the simplest topology, due to the reduced number of converters and controllers; it has good conversion efficiency (greater than 95%) and high reliability since its technology is already well established [1-2].”
BackgroundThe Thyristor Electronic Transformer: a Power Converter Using a High-Frequency Link
McMurray, W. (1971) · IEEE Transactions on Industry and General Applications · doi:10.1109/tiga.1971.4181326 · Cited by 84 · cited 1×
“Developed originally for AC-AC applications with the same input and output frequencies [5-7], the Solid State Transformer – SST – is based on a high-frequency AC link and a high-frequency transformer.”
BackgroundPerformance evaluation of solid state transformer based microgrid in FREEDM systems
She, X., Lukic, S., Huang, A. Q., Bhattacharya, S., & Baran, M. (2011) · 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2011.5744594 · Cited by 84 · cited 1×
“Developed originally for AC-AC applications with the same input and output frequencies [5-7], the Solid State Transformer – SST – is based on a high-frequency AC link and a high-frequency transformer.”
BackgroundA new multilevel converter for Megawatt scale solar photovoltaic utility integration
Krishnamoorthy, H. S., Essakiappan, S., Enjeti, P. N., Balog, R. S., & Ahmed, S. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6166008 · Cited by 45 · cited 1×
“In solar farms, the application of this technology has attracted attention, since it could provide a total efficiency increase, both in conversion and in power generation, thanks to the increased number of MPP trackers [8] (fig.”
BackgroundCentral inverter topology issues in large-scale photovoltaic power plants: Shading and system losses
Foureaux, N. C., Machado, A. A. P., Silva, E., Pires, I. A., Brito, J. A. S., & Cardoso, F. B. (2015) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc.2015.7355828 · Cited by 24
Self-citationComparison of central vs distributed inverters: application to photovoltaic systems
Villarejo, J. A. F., Molina‐García, Á., & de Jódar, E. (2011) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2011.5984325 · Cited by 14 · cited 1×
“It is the simplest topology, due to the reduced number of converters and controllers; it has good conversion efficiency (greater than 95%) and high reliability since its technology is already well established [1-2].”
Background
Research works printed but not linked: 1
- curtin, 0, High Voltage Silicon Carbide, NIST Workshop May 2012 - Office of Naval Research, 588
Cited by
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
“[136] S. Zengin and M. Boztepe, ‘‘Trapezoid current modulated DCM AC/DC DAB converter for two-stage solid state transformer,’’ in Proc.”
BackgroundMethodInfluentialControl Strategy for Arc-Suppression-Coil-Grounded Star-Connected Power Electronic Transformers
Ouyang, S.-D., Liu, J.-J., Yang, Y., Chen, X.-X., Song, S.-G., & Wu, H. (2019) · IEEE transactions on power electronics · doi:10.1109/tpel.2018.2866871 · Cited by 39
“Therefore, the CHB has become today’s mainstream topology for the PET MV stage, including the European traction PET [3], [4], a Chinese 500-kVA distribution grid application electronic power transformer (EPT) [10] (in service since 2015), the future renewable electric energy delivery and management SST [6], photovolta…”
BackgroundAmaral, F. V., Parreiras, T. M., Lobato, G. C., Machado, A. A. P., Pires, I. A., & Filho, B. J. C. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2827002 · Cited by 57
“Recent studies [5]–[6] have pointed out the advantages of cascaded”
BackgroundSelf-citationCentral inverter topology issues in large-scale photovoltaic power plants: Shading and system losses
Foureaux, N. C., Machado, A. A. P., Silva, E., Pires, I. A., Brito, J. A. S., & Cardoso, F. B. (2015) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc.2015.7355828 · Cited by 24
“Suitable alternatives for large-scale PV systems connected to the medium voltage grid already exists [4-7], as presents fig 13 and 14.”
BackgroundMethodSelf-citationControl Strategy for Single-Phase Open-Circuit Operation of a Modular Solid-State Transformer
Ouyang, S., Liu, J., Chen, X., & Yang, Y. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2885562 · Cited by 15
“Research on and prototypes of SSTs have been reported on subjects ranging from traction [3], [4], renewable energy [5]–[8], to smart grids”
Background
Metadata
- Authors
- Foureaux, N. C., Filho, B. J. C., & Brito, J. A. S.
- Affiliations
- Universidade Federal de Minas Gerais (BR)
- ORCID
- Filho, B. J. Cardoso
- Venue
- 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia)
- Publisher
- IEEE
- Published
- 2015-06
- Pages
- 801-808
- OpenAlex
- W1535791681
- Cited by
- 13
- References
- 11
- Citations by year
- 2024: 1 · 2023: 1 · 2021: 3 · 2020: 1 · 2018: 3 · 2017: 2 · 2015: 2
- FWCI
- 2.89
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Photovoltaic System Optimization Techniques
- Keywords
- cascaded multilevel converter, solid-state transformer, medium-voltage converters, photovoltaic power plants, full-bridge inverter, high-frequency transformer, conversion efficiency, converter control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.