The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
A modular, open-source 3D printed underactuated hand
Abstract
Commercially available robotic hands are often expensive, customized for specific platforms, and difficult to modify. In this paper, we present the design of an open-source, low-cost, single actuator underactuated hand that can be created through fast and commonly-accessible rapid-prototyping techniques and simple, off-the-shelf components. This project establishes the design of an adaptive, four-finger hand utilizing simple 3D-printed components, compliant flexure joints, and readily obtainable off-the-shelf parts. Modular and adjustable finger designs are provided, giving the user a range of options depending on the intended use of the hand. The design tradeoffs and decisions made to achieve the 3D-printable, compact and lightweight robotic gripper are discussed, as well as a preliminary discussion of the performance differences between the finger designs. The authors intend this work to be the first in a series of open-source designs to be released, and through the contributions of the open-source user community, result in a large number of design modifications and variations available to researchers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Birglen, L., Laliberté, T., & Gosselin, C. (2008) · Springer Tracts in Advanced Robotics · doi:10.1007/978-3-540-77459-4 · Cited by 572 · cited 2×
“Underactuated hands [1] [2] have been shown to improve the generality of simple grippers by adaptively conforming to the surface of objects without the explicit need for sensors or complicated feedback systems.”
BackgroundThe Highly Adaptive SDM Hand: Design and Performance Evaluation
Dollar, A. M., & Howe, R. D. (2010) · The International Journal of Robotics Research · doi:10.1177/0278364909360852 · Cited by 529
Self-citationThe BarrettHand grasper – programmably flexible part handling and assembly
Townsend, W. T. (2000) · Industrial Robot the international journal of robotics research and application · doi:10.1108/01439910010371597 · Cited by 428
A robust compliant grasper via shape deposition manufacturing
Dollar, A. M., & Howe, R. D. (2006) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2006.871090 · Cited by 233
Self-citationAn anthropomorphic underactuated robotic hand with 15 dofs and a single actuator
Gosselin, C., Pelletier, F. J., & Laliberté, T. (2008) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2008.4543295 · Cited by 193
Wyrobek, K. A., Berger, E. H., Van der Loos, H. F. M., & Salisbury, J. K. (2008) · 2008 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2008.4543527 · Cited by 189
Open-Loop Precision Grasping With Underactuated Hands Inspired by a Human Manipulation Strategy
Odhner, L. U., R., R., & Dollar, A. M. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2240298 · Cited by 109
Self-citationForce Analysis of Connected Differential Mechanisms: Application to Grasping
Birglen, L., & Gosselin, C. (2006) · The International Journal of Robotics Research · doi:10.1177/0278364906068942 · Cited by 91
Precision grasping and manipulation of small objects from flat surfaces using underactuated fingers
Odhner, L. U., Ma, R. R., & Dollar, A. M. (2012) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2012.6225211 · Cited by 64
Self-citation
Cited by
A novel type of compliant and underactuated robotic hand for dexterous grasping
Deimel, R., & Brock, O. (2016) · The International Journal of Robotics Research · doi:10.1177/0278364915592961 · Cited by 1,084
Design, fabrication and control of origami robots
Rus, D., & Tolley, M. T. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0009-8 · Cited by 641
Benchmarking in Manipulation Research: Using the Yale-CMU-Berkeley Object and Model Set
Calli, B., Walsman, A., Singh, A., Srinivasa, S., Abbeel, P., & Dollar, A. M. (2015) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2015.2448951 · Cited by 602
Self-citationRankouhi, B., Javadpour, S., Delfanian, F., & Letcher, T. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0113-2 · Cited by 457
Analysis and Observations From the First Amazon Picking Challenge
Correll, N., Bekris, K. E., Berenson, D., Brock, O., Causo, A., Hauser, K., Okada, K., Rodriguez, A., Romano, J. M., & Wurman, P. R. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2016.2600527 · Cited by 425
“Team Grizzly used a combination of suction and grasping using Baxter’s stock suction cap in one hand and the Yale Open Hand [5] in the other.”
BackgroundMethod
Metadata
- Authors
- Ma, R. R., Odhner, L. U., & Dollar, A. M.
- Venue
- 2013 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE
- Published
- 2013-05
- Pages
- 2737-2743
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W1971688004
- Cited by
- 255
- References
- 9
- FWCI
- 26.50
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A modular, open-source 3D printed underactuated hand. https://app.cochat.ai/papers/10.1109/icra.2013.6630954
- The paper
- Ma, R. R., Odhner, L. U., & Dollar, A. M. (2013). A modular, open-source 3D printed underactuated hand. 2013 IEEE International Conference on Robotics and Automation. https://doi.org/10.1109/icra.2013.6630954
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.