Localization in highly dynamic environments using dual-timescale NDT-MCL
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Industrial environments are rarely static and often their configuration is continuously changing due to the material transfer flow. This is a major challenge for infrastructure free localization systems. In this paper we address this challenge by introducing a localization approach that uses a dual-timescale approach. The proposed approach - Dual-Timescale Normal Distributions Transform Monte Carlo Localization (DT-NDT-MCL) - is a particle filter based localization method, which simultaneously keeps track of the pose using an apriori known static map and a short-term map. The short-term map is continuously updated and uses Normal Distributions Transform Occupancy maps to maintain the current state of the environment. A key novelty of this approach is that it does not have to select an entire timescale map but rather use the best timescale locally. The approach has real-time performance and is evaluated using three datasets with increasing levels of dynamics. We compare our approach against previously proposed NDT-MCL and commonly used SLAM algorithms and show that DT-NDT-MCL outperforms competing algorithms with regards to accuracy in all three test cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mobile Robot Simultaneous Localization and Mapping in Dynamic Environments
Wolf, D. F., & Sukhatme, G. S. (2005) · Autonomous Robots · doi:10.1007/s10514-005-0606-4 · Cited by 248 · cited 1×
“Wolf and Sukhatme [9] propose an approach that labels every cell into a dynamic map, which has been detected to change state.”
BackgroundInformation-Based Compact Pose SLAM
Ila, V., Porta, J. M., & Andrade-Cetto, J. (2010) · IEEE Transactions on Robotics · doi:10.1109/tro.2009.2034435 · Cited by 183 · cited 6×
“methods: gmapping [24]4, mapping and tracking based on the NDT-2-NDT registration [20] and a ROS implementation of Pose SLAM [25]5.”
BackgroundMethodInfluentialSelf-citation
Cited by
A Survey of Autonomous Driving: Common Practices and Emerging Technologies
Yurtsever, E., Lambert, J., Carballo, A., & Takeda, K. (2020) · IEEE Access · doi:10.1109/access.2020.2983149 · Cited by 1,889
“An NDT-based Monte Carlo Localization (MCL) method that utilizes an offline static map and a constantly updated shortterm map was developed by [120].”
MethodAkai, N., Morales, L. Y., Takeuchi, E., Yoshihara, Y., & Ninomiya, Y. (2017) · 2017 IEEE Intelligent Vehicles Symposium (IV) · doi:10.1109/ivs.2017.7995900 · Cited by 115
The Next Step in Robot Commissioning: Autonomous Picking and Palletizing
Krug, R., Stoyanov, T., Tincani, V., Andreasson, H., Mosberger, R., Fantoni, G., & Lilienthal, A. J. (2016) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2016.2519944 · Cited by 83
Self-citation
Metadata
- Authors
- Valencia, R., Saarinen, J., Andreasson, H., Vallve, J., Andrade-Cetto, J., & Lilienthal, A. J.
- Venue
- 2014 IEEE International Conference on Robotics and Automation (ICRA)
- Publisher
- IEEE
- Published
- 2014-05
- Pages
- 3956-3962
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2057520584
- Cited by
- 54
- References
- 2
- FWCI
- 7.88
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.