The DOI matches its Crossref record.
High boost converter using voltage multiplier
Abstract
With the increasing demand for renewable energy, distributed power included in fuel cells have been studied and developed as a future energy source. For this system, a power conversion circuit is necessary to interface the generated power to the utility. In many cases, a high step-up DC/DC converter is needed to boost low input voltage to high voltage output. Conventional methods using cascade DC/DC converters cause extra complexity and higher cost. The conventional topologies to get high output voltage use flyback DC/DC converters. They have the leakage components that cause stress and loss of energy that results in low efficiency. This paper presents a high boost converter with a voltage multiplier and a coupled inductor. The secondary voltage of the coupled inductor is rectified using a voltage multiplier. High boost voltage is obtained with low duty cycle. Theoretical analysis and experimental results verify the proposed solutions using a 300 W prototype.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
Metadata
- Authors
- Baek, J.-W., Ryoo, M.-H., Kim, T.-J., Yoo, D.-W., & Kim, J.-S.
- Venue
- 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005.
- Publisher
- IEEE
- Published
- 2005
- Pages
- 6 pp.
- OpenAlex
- W2168785284
- Cited by
- 219
- References
- 0
- FWCI
- 4.41
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High boost converter using voltage multiplier. https://app.cochat.ai/papers/10.1109/iecon.2005.1568967
- The paper
- Baek, J.-W., Ryoo, M.-H., Kim, T.-J., Yoo, D.-W., & Kim, J.-S. (2005). High boost converter using voltage multiplier. 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005. https://doi.org/10.1109/iecon.2005.1568967
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.