AC circulating currents suppression in modular multilevel converter
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Modular multilevel converter is a next generation multilevel converters for medium to high voltage conversion applications, such as medium voltage motor drive and high voltage direct current transmission. One potential issue of this type of converter is the AC circulating current, which increases the current stress and brings additional conduction loss to the system. This paper proposes modified control architecture for modular multilevel converters, aiming at suppressing the AC components in the circulating current. Specifically, a proportional-resonant type minor loop is incorporated to regulate the most AC components of the circulating current to zero in addition to the DC regulation loop. The proposed minor loop can also be applied to single phase MMC, which is not available in previous methods. Simulation results for a three-phase MMC operating as an inverter are provided to demonstrate the feasibility of the proposed method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 5×
“on double-line frequency, negative-sequence rotational dq coordinate is proposed in [12], which can effectively suppress the double line-frequency component.”
BackgroundMethodInfluentialA New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 1×
“An ac/ac MMC family was proposed for the next generation medium voltage traction system [8], and a high performance predictive control solution for this type converter is presented in [9].”
MethodGnanarathna, U. N., Gole, A. M., & Jayasinghe, R. P. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2060737 · Cited by 739
Cited by
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities
Nami, A., Liang, J., Dijkhuizen, F., & Demetriades, G. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2327641 · Cited by 1,042
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
Sliding Mode Control of the Modular Multilevel Converter
Yang, Q., Saeedifard, M., & Perez, M. A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2818657 · Cited by 89
Metadata
- Authors
- She, X., Huang, A., Ni, X., & Burgos, R.
- Venue
- IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society
- Publisher
- IEEE
- Published
- 2012-10
- Pages
- 191-196
- ISSN
- 1553-572X (ISSN-L)
- OpenAlex
- W2027503367
- Cited by
- 118
- References
- 3
- FWCI
- 13.10
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.