Vacancy-modulated conductive oxide resistive RAM (VMCO-RRAM): An area-scalable switching current, self-compliant, highly nonlinear and wide on/off-window resistive switching cell
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
We report a novel self-compliant and self-rectifying resistive switching memory cell, with area-scalable switching currents, featuring a set current density of ~5nA/nm2(2and low reset current density of2(102and retention extrapolates to 10yr at 101°C. The switching stack is fully based on ALD processes, using common high-k dielectrics and has a thickness of <;10nm, meeting the 3D Vertical RRAM requirements. Moreover, we point out the nonlinearity-low-current operation interdependence and discuss the scaling potential of the areal switching RRAM for reliable sub-μA current operation in the 10nm-cell size realm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Memristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Cited by
Training and operation of an integrated neuromorphic network based on metal-oxide memristors
Prezioso, M., Merrikh-Bayat, F., Hoskins, B. D., Adam, G. C., Likharev, K. K., & Strukov, D. B. (2015) · Nature · doi:10.1038/nature14441 · Cited by 3,001
“26,27 On the negative side, the scale makes the device-to-device reproducibility of device parameters, most importantly of the voltage required for memristor's electric forming 20,21 , hard to achieve with currently used fabrication technologies.”
BackgroundMemristive crossbar arrays for brain-inspired computing
Xia, Q., & Yang, J. J. (2019) · Nature Materials · doi:10.1038/s41563-019-0291-x · Cited by 1,800
A review of emerging non-volatile memory (NVM) technologies and applications
Chen, A. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.07.006 · Cited by 668
“RRAM with sufficient self-selecting properties ( e.g. , intrinsic rectifying or nonlinear behaviors) may enable functional memories without external selectors in a 1-resistor (1R) cell [39].”
BackgroundThe Future of Memristors: Materials Engineering and Neural Networks
Sun, K., Chen, J., & Yan, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202006773 · Cited by 482
Multibit memory operation of metal-oxide bi-layer memristors
Stathopoulos, S., Khiat, A., Trapatseli, M., Cortese, S., Serb, A., Valov, I., & Prodromakis, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-17785-1 · Cited by 312
Metadata
- Authors
- Govoreanu, B., Redolfi, A., Zhang, L., Adelmann, C., Popovici, M., Clima, S., Hody, H., Paraschiv, V., Radu, I. P., Franquet, A., Liu, J.-C., Swerts, J., Richard, O., Bender, H., Altimime, L., & Jurczak, M.
- Venue
- 2013 IEEE International Electron Devices Meeting
- Publisher
- IEEE
- Published
- 2013-12
- Pages
- 10.2.1-10.2.4
- ISSN
- 0163-1918 (ISSN-L)
- OpenAlex
- W1967863443
- Cited by
- 83
- References
- 2
- FWCI
- 9.36
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.