The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Winding factors and Joule losses of permanent magnet machines with concentrated windings
Abstract
The torque to MMF ratio of a permanent magnet machine with concentrated windings is normally much lower than for the more traditionally used distributed windings. BLDC and AC machines with concentrated windings usually have a slot pitch of only 2/3 the length of the pole pitch, which results in a poor fundamental winding factor of 0,866. This can be compared to the ideal winding factor of one, which can easily be acquired using distributed windings. However, by choosing better combinations of the pole and slot numbers for a machine with concentrated windings, the winding factor can be substantially increased. Moreover, it is also possible to achieve low cogging torque without skewing, simply by selecting appropriate combinations. The presented theory includes both single- and double-layer configurations of concentrated windings. The theory is verified by using FEM analysis. This paper describes methods for designing high performance permanent magnet machines with concentrated windings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of high performance PM motors with concentrated windings
Cros, J., & Viarouge, P. (2002) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2002.1009476 · Cited by 667
Honda, Y., Nakamura, T., Higaki, T., & Takeda, Y. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1997.643011 · Cited by 92
Cited by
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
Baudart, F., Dehez, B., Matagne, E., Telteu-Nedelcu, D., Alexandre, P., & Labrique, F. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2170393 · Cited by 98
Metadata
- Authors
- Magnussen, F., & Sadarangani, C.
- Venue
- IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03.
- Publisher
- IEEE
- Published
- 2003-08-27
- Volume
- 1
- Pages
- 333-339
- OpenAlex
- W1821450533
- Cited by
- 395
- References
- 2
- FWCI
- 12.56
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Winding factors and Joule losses of permanent magnet machines with concentrated windings. https://app.cochat.ai/papers/10.1109/iemdc.2003.1211284
- The paper
- Magnussen, F., & Sadarangani, C. (2003). Winding factors and Joule losses of permanent magnet machines with concentrated windings. IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. https://doi.org/10.1109/iemdc.2003.1211284
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.