The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
An enhanced WiFi indoor localization system based on machine learning
Abstract
The Global Navigation Satellite Systems (GNSS) suffer from accuracy deterioration and outages in dense urban canyons and are almost unavailable for indoor environments. Nowadays, developing indoor positioning systems has become an attractive research topic due to the increasing demands on ubiquitous positioning. WiFi technology has been studied for many years to provide indoor positioning services. The WiFi indoor localization systems based on machine learning approach are widely used in the literature. These systems attempt to find the perfect match between the user fingerprint and pre-defined set of grid points on the radio map. However, Fingerprints are duplicated from available Access Points (APs) and interference, which increase number of matched patterns with the user's fingerprint. In this research, the Principle Component Analysis (PCA) is utilized to improve the performance and to reduce the computation cost of the WiFi indoor localization systems based on machine learning approach. All proposed methods were developed and physically realized on Android-based smart phone using the IEEE 802.11 WLANs. The experimental setup was conducted in a real indoor environment in both static and dynamic modes. The performance of the proposed method was tested using K-Nearest Neighbors, Decision Tree, Random Forest and Support Vector Machine classifiers. The results show that the performance of the proposed method outperforms other indoor localization reported in the literature. The computation time was reduced by 70% when using Random Forest classifier in the static mode and by 33% when using KNN in the dynamic mode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RADAR: an in-building RF-based user location and tracking system
Bahl, P., & Padmanabhan, V. N. (2002) · Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064) · doi:10.1109/infcom.2000.832252 · Cited by 8,380
King, T., Haenselmann, T., & Effelsberg, W. (2007) · Lecture Notes in Computer Science · doi:10.1007/978-3-540-75160-1_2 · Cited by 45
Cited by
A Review of Indoor Localization Techniques and Wireless Technologies
Obeidat, H., Shuaieb, W., Obeidat, O., & Abd-Alhameed, R. (2021) · Wireless Personal Communications · doi:10.1007/s11277-021-08209-5 · Cited by 424
Machine Learning Based Indoor Localization Using Wi-Fi RSSI Fingerprints: An Overview
Singh, N., Choe, S., & Punmiya, R. (2021) · IEEE Access · doi:10.1109/access.2021.3111083 · Cited by 272
A Survey of Machine Learning for Indoor Positioning
Nessa, A., Adhikari, B., Hussain, F., & Fernando, X. N. (2020) · IEEE Access · doi:10.1109/access.2020.3039271 · Cited by 269
IoT and digital twin enabled smart tracking for safety management
Zhao, Z., Shen, L., Yang, C., Wu, W., Zhang, M., & Huang, G. Q. (2021) · Computers & Operations Research · doi:10.1016/j.cor.2020.105183 · Cited by 155
WLAN-BLE Based Indoor Positioning System using Machine Learning Cloud Services
Teran, M., Carrillo, H., & Parra, C. (2018) · 2018 IEEE 2nd Colombian Conference on Robotics and Automation (CCRA) · doi:10.1109/ccra.2018.8588127 · Cited by 14
Metadata
- Authors
- Salamah, A. H., Tamazin, M., Sharkas, M. A., & Khedr, M.
- Venue
- 2016 International Conference on Indoor Positioning and Indoor Navigation (IPIN)
- Publisher
- IEEE
- Published
- 2016-10
- Pages
- 1-8
- ISSN
- 2162-7347 (ISSN-L)
- OpenAlex
- W2550856709
- Cited by
- 163
- References
- 2
- FWCI
- 14.60
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.