The impact of new technology on soft error rates
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper presents the impact of new microprocessor technology on microprocessor soft error rate (SER). The results are based on Oracle's (formerly Sun Microsystems) neutron beam testing over the past several years. We describe how the tests were conducted and how the test results are used to influence microprocessor design. As microprocessor feature sizes decreased from 180nm to 65nm, memory error rates per bit decreased, but our data indicates a reversal of this trend at 40nm. Flop error rates still appear to be decreasing, even at a 28nm feature size We measure SER as a function of power supply voltage (Vdd) over a range of 1.2V down to 0.5V, and the data shows SER significantly increases as Vdd decreases. This result implies that dynamic voltage frequency scaling (DVFS), a commonly used microprocessor energy reduction technique, could cause a significant decrease in microprocessor reliability. The data also show that more energy-efficient transistors using back bias technique do not appear to significantly impact microprocessor reliability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SRAM SER in 90, 130 and 180 nm bulk and SOI technologies
Cannon, E. H., Reinhardt, D. D., Gordon, M. S., & Makowenskyj, P. S. (2004) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/relphy.2004.1315341 · Cited by 124
Cited by
Furano, G., Meoni, G., Dunne, A., Moloney, D., Ferlet-Cavrois, V., Tavoularis, A., Byrne, J., Buckley, L., Psarakis, M., Voss, K.-O., et al. (2020) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/maes.2020.3008468 · Cited by 259
“On the other hand, flop error rates decrease as technology nodes decrease down to at least 28 nm [48].”
BackgroundSoft errors in DNN accelerators: A comprehensive review
Ibrahim, Y., Wang, H., Liu, J., Wei, J., Chen, L., Rech, P., Adam, K., & Guo, G. (2020) · Microelectronics Reliability · doi:10.1016/j.microrel.2020.113969 · Cited by 102
Metadata
- Authors
- Dixit, A., & Wood, A.
- Venue
- 2011 International Reliability Physics Symposium
- Publisher
- IEEE
- Published
- 2011-04
- Pages
- 5B.4.1-5B.4.7
- ISSN
- 0735-0791 (ISSN-L)
- OpenAlex
- W2167839483
- Cited by
- 299
- References
- 1
- FWCI
- 29.14
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.