Inductive link design for medical implants
Abstract
This paper describes design principles to design and develop a transcutaneous link for medical implants using inductively coupled coils. Parameters which optimize link efficiency have been discussed in the light of previous studies and a simple design methodology to find optimized parameters for Class E amplifier and inductive coils is outlined. Paper also describes design of an indigenously developed transcutaneous link from commercial off-the-shelf components to demonstrate the design process. Simulation and practical results of the link developed at 2.5MHz for 100mW output power are provided. We were able to achieve 40% link efficiency with data rate of 128kbps from laboratory-based discrete electronic components.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Inductive power transfer introduces bioengineering challenges due to Specific Absorption Rate limits and minimal size capacity for device implantation.
“However, inductive power transfer introduces numerous bioengineering challenges due to Specific Absorption Rate (SAR) limits and minimal size capacity for device implantation.”
From Inductively powered wireless pacing via a miniature pacemaker and remote stimulation control system (2017) · cites this paper as [15]
Cited by
Sorted by citations
Wireless power transfer approaches for medical implants: a review
Haerinia, M., & Shadid, R. (2020) · Signals · doi:10.3390/signals1020012 · Cited by 174 · see citing works
Inductively powered wireless pacing via a miniature pacemaker and remote stimulation control system
Abiri, P., Abiri, A., Packard, R. R. S., Ding, Y., Yousefi, A., Ma, J., Bersohn, M., Nguyen, K.-L., Markovic, D., Moloudi, S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-06493-5 · Cited by 67 · see citing works
- Authors
- Ali, H., Ahmad, T. J., & Khan, S. A.
- Affiliations
- Sir Syed CASE Institute of Technology (PK)
- ORCID
- Khan, Shoab A
- Venue
- 2009 IEEE Symposium on Industrial Electronics & Applications
- Publisher
- IEEE
- Published
- 2009-10
- Pages
- 694-699
- OpenAlex
- W2133607350
- Cited by
- 41
- References
- 0
- Citations by year
- 2025: 3 · 2024: 3 · 2023: 2 · 2022: 3 · 2021: 3 · 2020: 5 · 2019: 4 · 2018: 3 · 2017: 2 · 2016: 2 · 2015: 4 · 2014: 2 · 2013: 4 · 2012: 1
- FWCI
- 0.48
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE Symposium on Industrial Electronics & Applications (ISIEA) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Engineering › Mechanical Engineering › Induction Heating and Inverter Technology
- Keywords
- inductive power transfer, biomedical implants, induction coil, class-E power amplifier, link efficiency, wireless power transfer, commercial off-the-shelf components
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
