A Slope-robust Cascaded Ground Segmentation in 3D Point Cloud for Autonomous Vehicles
The DOI matches its Crossref record; 19 of the 20 references it cites were found in a registry or an index.
Abstract
In this paper, a slope-robust cascaded ground segmentation in 3D point cloud for autonomous vehicles is presented. In many challenging terrains encountered by autonomous vehicles where the ground does not have a simple planar shape such as sloped roads, many existing ground segmentation algorithms fail. The proposed algorithm aims to correctly segment ground points in scans where these challenging terrains are present. The proposed method consists of two main steps. First, filtering the majority of non-ground points using the geometry of the sensor and the distance between consecutive rings in the scan. In the second step, multi-region RANSAC plane fitting is used to separate remaining non-ground points from ground points in the scan. The 3D data was taken and partially labeled for quantitative evaluation. The experimental results were outstanding as the proposed algorithm could segment the ground correctly in various challenging terrains. The proposed algorithm could correctly segment ground points in the scan even in sloped terrains and achieved higher accuracy than other algorithms used in the evaluation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This approach has been made much more robust through various filtering techniques, such as ground filtering [162] and map-based filtering [163].”
From A Survey of Autonomous Driving: Common Practices and Emerging Technologies (2020) · cites this paper as [163]
In the citing paper
“Point cloud based methods may also use similarity metrics such as point density and Hausdorff distance [163], [186].”
From A Survey of Autonomous Driving: Common Practices and Emerging Technologies (2020) · cites this paper as [163]
In the citing paper
“For lidar, several filtering methods can be used to reduce clutter in the data such as ground extraction [162] or map-based filtering [163].”
From A Survey of Autonomous Driving: Common Practices and Emerging Technologies (2020) · cites this paper as [163]
Citations
Cites
Fischler, M. A., & Bolles, R. C. (1981) · Communications of the ACM · doi:10.1145/358669.358692 · Cited by 25,893
Corke, P., Roberts, J., Cunningham, J., & Hainsworth, D. (2008) · Springer Handbook of Robotics · doi:10.1007/978-3-540-30301-5_50 · Cited by 3,543
Junior: The Stanford entry in the Urban Challenge
Montemerlo, M., Becker, J., Bhat, S., Dahlkamp, H., Dolgov, D., Ettinger, S., Haehnel, D., Hilden, T., Hoffmann, G., Huhnke, B., et al. (2008) · Journal of Field Robotics · doi:10.1002/rob.20258 · Cited by 1,027
Fast segmentation of 3D point clouds for ground vehicles
Himmelsbach, M., Hundelshausen, F. V., & Wuensche, H.-J. (2010) · 2010 IEEE Intelligent Vehicles Symposium · doi:10.1109/ivs.2010.5548059 · Cited by 446
Fast segmentation of 3D point clouds: A paradigm on LiDAR data for autonomous vehicle applications
Zermas, D., Izzat, I., & Papanikolopoulos, N. (2017) · 2017 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2017.7989591 · Cited by 370
Asvadi, A., Premebida, C., Peixoto, P., & Nunes, U. (2016) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2016.06.007 · Cited by 245
Robust curb detection and vehicle localization in urban environments
Hata, A. Y., Osorio, F. S., & Wolf, D. F. (2014) · 2014 IEEE Intelligent Vehicles Symposium Proceedings · doi:10.1109/ivs.2014.6856405 · Cited by 131
Multi-Target Tracking using a 3D-Lidar sensor for autonomous vehicles
Choi, J., Ulbrich, S., Lichte, B., & Maurer, M. (2013) · 16th International IEEE Conference on Intelligent Transportation Systems (ITSC 2013) · doi:10.1109/itsc.2013.6728343 · Cited by 107
Detection and Tracking of Moving Objects Using 2.5D Motion Grids
Asvadi, A., Peixoto, P., & Nunes, U. (2015) · 2015 IEEE 18th International Conference on Intelligent Transportation Systems · doi:10.1109/itsc.2015.133 · Cited by 80
Motion segmentation and scene classification from 3D LIDAR data
Steinhauser, D., Ruepp, O., & Burschka, D. (2008) · IEEE Intelligent Vehicles Symposium · doi:10.1109/ivs.2008.4621281 · Cited by 74
Cited by
Items 101–112 of 112
PolarG-Seg: An Efficient and Effective Ground Segmentation Method for 3D LiDAR Point Clouds
Wang, X., Zhao, X., Liu, X., Zhang, J., Liu, Y., Zhong, S., & Yu, H. (2025) · IEEE International Conference on Robotics and Biomimetics (ROBIO) · doi:10.1109/robio66223.2025.11377228
Jilil, P., Mijit, T., Firkat, E., Zhu, B., Parhat, S., Xu, E., Zhu, J., & Hamdulla, A. (2026) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2026.3679833
Sistema de conducción autónoma aplicado a rotondas simulado en Gazebo y Controlado en ROS 2
Vicente Vidal, P. (2023) · Archivo Digital UPM (Universidad Politécnica de Madrid)
Fast Point Cloud Ground Segmentation Using Frequency Analysis and Linear Plane Estimation
Rotjanakarin, W., & Kaewapichai, W. (2025) · IEEE Access · doi:10.1109/access.2025.3593664
Massif Point Cloud Extraction for Open-Pit Mines Based on Adaptive Voxel Partitioning
Li, R., Wang, Y., Li, Z., Zhang, Y., Zhou, M., & Wu, M. (2026) · Lecture notes in electrical engineering · doi:10.1007/978-981-96-7850-1_19
Robust Ground Point Cloud Segmentation and Mapping for Agricultural Mobile Robots
Fang, P., Huo, X., Li, M., Wen, X., Guan, Y., & Chen, W. (2025) · IEEE International Conference on Robotics and Biomimetics (ROBIO) · doi:10.1109/robio66223.2025.11376195
Firkat, E., Mijit, T., Jilil, P., Zhu, B., Xu, E., Zhu, J., & Hamdulla, A. (2026) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2026.3687921
Omni-GroundSeg: Robust Real-Time LiDAR Ground Segmentation
Li, D., Fan, W., Jing, R., Feng, P., Li, J., & Han, D. (2026) · International Conference on Intelligent Computing and Signal Processing (ICSP) · doi:10.1109/icsp69961.2026.11540609
ACE-LIO: Adaptive centroid-based ground extraction for low-drift LiDAR-inertial odometry
Ma, Y., Li, W., Luan, S., Ren, J., Ou, J., Zhou, J., & Huang, P. (2026) · Measurement · doi:10.1016/j.measurement.2026.122143
ACZ-GSeg: Adaptive Concentric Zone-based Two-stage Ground Segmentation for LiDAR Point CloudsPreprint
Liu, G. Z. C. W. B. (2026) · arXiv (Cornell University) · doi:10.48550/arxiv.2607.12110
ACZ-GSeg: Adaptive Concentric Zone-based Two-stage Ground Segmentation for LiDAR Point CloudsPreprint
zhang, G. Z., Wang, C., Liu, B., & Ding, Y. D. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7202155
Adham, M., Li, Y., Mahmoud, M., Mansour, A., & Wu, C. (2026) · Lecture notes in civil engineering · doi:10.1007/978-981-92-2743-3_37
Metadata
- Authors
- Narksri, P., Takeuchi, E., Ninomiya, Y., Morales, Y., Akai, N., & Kawaguchi, N.
- Affiliations
- Nagoya University (JP)
- Institutes of Innovation for Future Society, Nagoya University (JP)
- Venue
- 2018 21st International Conference on Intelligent Transportation Systems (ITSC)
- Publisher
- IEEE
- Published
- 2018-11
- Pages
- 497-504
- OpenAlex
- W2904274854
- Cited by
- 99
- References
- 20
- Citations by year
- 2026: 6 · 2025: 24 · 2024: 20 · 2023: 19 · 2022: 13 · 2021: 10 · 2020: 5 · 2019: 2
- FWCI
- 7.38
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE International Conference on Intelligent Transportation Systems (ITSC) (publishedVersion)
- Funders
- Japan Science and Technology Agency
- Topics
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Robotics and Sensor-Based Localization
- Physical Sciences › Engineering › Automotive Engineering › Autonomous Vehicle Technology and Safety
- Physical Sciences › Computer Science › Computer Graphics and Computer-Aided Design › 3D Shape Modeling and Analysis
- Keywords
- ground segmentation, 3D point clouds, autonomous vehicles, sloped terrain, cascaded segmentation, RANSAC plane fitting, point cloud filtering, challenging terrain
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.