The DOI matches its Crossref record.
Automotive LiDAR performance verification in fog and rain
Abstract
This article focuses on testing and investigating further development needs for LiDARs in self-driving cars in adverse weather. The article compares two different LiDARs (Ibeo Lux and Velodyne PUCK), which both use the 905 nm wavelengths, which are used in more than 95% of currently available LiDARs. The performance was tested and estimated in stabilized fog conditions at Cerema fog chamber facilities. This provides a good basis for repeating the same validation procedure multiple times and ensuring the right development decisions. However, performance of the LiDARs suffers when the weather conditions become adverse and visibility range decreases. A 50% reduction in target detection performance was observed over the exhaustive tests. Therefore, changing to higher wavelengths (1550 nm) was considered using redesigned “pre-prototype LiDAR”. The preliminary results indicate that there is no reason to not use 1550 nm wavelength, which due to eye safety regulations gives an opportunity to use 20 times more power compared to the traditional 905 nm. In order to clarify the expected benefits, additional feasibility studies are still needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li, Y., & Ibanez-Guzman, J. (2020) · IEEE Signal Processing Magazine · doi:10.1109/msp.2020.2973615 · Cited by 714
A Review and Perspective on Optical Phased Array for Automotive LiDAR
Hsu, C.-P., Li, B., Solano-Rivas, B., Gohil, A. R., Chan, P. H., Moore, A. D., & Donzella, V. (2021) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2020.3022948 · Cited by 314
Establishing design principles for emissive organic SWIR chromophores from energy gap laws
Friedman, H. C., Cosco, E. D., Atallah, T. L., Jia, S., Sletten, E. M., & Caram, J. R. (2021) · Chem · doi:10.1016/j.chempr.2021.09.001 · Cited by 145
Goelles, T., Schlager, B., & Muckenhuber, S. (2020) · Sensors · doi:10.3390/s20133662 · Cited by 63
Measuring the Influence of Environmental Conditions on Automotive Lidar Sensors
Linnhoff, C., Hofrichter, K., Elster, L., Rosenberger, P., & Winner, H. (2022) · Sensors · doi:10.3390/s22145266 · Cited by 44
“, in case of [7] is set to extreme values.”
Background
Metadata
- Authors
- Kutila, M., Pyykonen, P., Holzhuter, H., Colomb, M., & Duthon, P.
- Venue
- 2018 21st International Conference on Intelligent Transportation Systems (ITSC)
- Publisher
- IEEE
- Published
- 2018-11
- Pages
- 1695-1701
- OpenAlex
- W2904648219
- Cited by
- 197
- References
- 0
- FWCI
- 21.62
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Automotive LiDAR performance verification in fog and rain. https://app.cochat.ai/papers/10.1109/itsc.2018.8569624
- The paper
- Kutila, M., Pyykonen, P., Holzhuter, H., Colomb, M., & Duthon, P. (2018). Automotive LiDAR performance verification in fog and rain. 2018 21st International Conference on Intelligent Transportation Systems (ITSC). https://doi.org/10.1109/itsc.2018.8569624
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.