The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Analysis and Control of Series/Series-Parallel Compensated Resonant Converter for Contactless Power Transfer
Abstract
Series/series (S/S) and series/parallel (S/P) compensations are widely used in contactless power transfer systems. However, the inductive input impedance of the S/S compensated converter operating at an output voltage gain intersection point impairs the system's efficiency, and the output voltage of the S/P compensated converter operating at resonant frequency is quite sensitive to variation of transformer's parameters caused by air gap change or misalignment. This paper proposes a novel series/series-parallel (S/SP) compensation topology to achieve both high efficiency and good output controllability. The frequency-domain and time-domain analyses of the proposed resonant converter are performed in this paper. Similar to the conventional resonant converters, both phase-locked-loop (PLL) control and fixed-frequency control can be employed. A 60-W prototype with PLL control and a 1.5-kW prototype with fixed-frequency control are built to verify the theoretical analysis. To perform the input-to-output voltage gain comparison, an S/P compensated converter is also fabricated. Experimental results verify the effectiveness of the proposed compensation method. The efficiency of the fabricated S/SP prototype reaches 95.2% at an output power of 1.5 kW with a 10-cm air gap between windings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470
Cited by
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Feng, H., Cai, T., Duan, S., Zhao, J., Zhang, X., & Chen, C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2589922 · Cited by 350
Song, K., Li, Z., Jiang, J., & Zhu, C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2767099 · Cited by 337
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
Metadata
- Authors
- Hou, J., Chen, Q., Wong, S.-C., Tse, C. K., & Ruan, X.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2015-03
- Volume
- 3
- Issue
- 1
- Pages
- 124-136
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2143422516
- Cited by
- 210
- References
- 2
- FWCI
- 7.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Control of Series/Series-Parallel Compensated Resonant Converter for Contactless Power Transfer. https://app.cochat.ai/papers/10.1109/jestpe.2014.2336811
- The paper
- Hou, J., Chen, Q., Wong, S.-C., Tse, C. K., & Ruan, X. (2015). Analysis and Control of Series/Series-Parallel Compensated Resonant Converter for Contactless Power Transfer. IEEE Journal of Emerging and Selected Topics in Power Electronics. https://doi.org/10.1109/jestpe.2014.2336811
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.