The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Constant Current/Voltage Charging Operation for Series-Series and Series-Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side Controller
Abstract
This paper proposes a new control technique, which only employs the primary-side controller and load identification approach to adjust charging voltage/current for series-series (SS) and series-parallel (SP) compensated wireless power transfer (WPT) systems. The advantages are that dual-side wireless communication for real-time charging current/voltage adjustment is avoided as well as it is suitable for different charging modes, e.g., constant voltage (CV) and constant current (CC) charging defined by the battery charging profile. The load identification approach, which utilizes reflected impedance theory and quadrature transformation algorithm for calculating the active power, is proposed to estimate the equivalent load resistance of battery. Then, the CV/CC charging for both SS and SP compensation are achieved by the PI-controlled phase-shift H-bridge inverter. The simulation and experimental results validate the feasibility of proposed control method. During the CC charging, 3.01 and 3.03 A for SS and SP compensation with the error of 1.2% and 1.4% are achieved. During the CV charging, 25.8 and 25.7 V for SS and SP compensation with the error of 1.1% and 1.3% are realized. The proposed method improves the performance of both SS- and SP-compensated WPT systems to be more suitable for the applications that require compact and lightweight receiver.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
A comparison of half-bridge resonant converter topologies
Steigerwald, R. L. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.4347 · Cited by 1,972
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Compensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
A Frequency Control Method for Regulating Wireless Power to Implantable Devices
Si, P., Hu, A. P., Malpas, S., & Budgett, D. (2008) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2008.918284 · Cited by 582
Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle Charging
Miller, J. M., Onar, O. C., & Chinthavali, M. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2382569 · Cited by 533
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
Qu, X., Han, H., Wong, S.-C., Tse, C. K., & Chen, W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2396471 · Cited by 474
Metadata
- Authors
- Song, K., Li, Z., Jiang, J., & Zhu, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017
- Pages
- 1-1
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2766275741
- Cited by
- 337
- References
- 24
- FWCI
- 10.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Constant Current/Voltage Charging Operation for Series-Series and Series-Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side Controller. https://app.cochat.ai/papers/10.1109/tpel.2017.2767099
- The paper
- Song, K., Li, Z., Jiang, J., & Zhu, C. (2017). Constant Current/Voltage Charging Operation for Series-Series and Series-Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side Controller. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2017.2767099
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.