The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Design and Experimental Analysis of a Medium-Frequency Transformer for Solid-State Transformer Applications
Abstract
Within a solid-state transformer, the isolated dc-dc converter and in particular its medium-frequency transformer are one of the critical components, as it provides the required isolation between primary and secondary sides and the voltage conversion typically necessary for the operation of the system. A comprehensive optimization procedure is required to find a transformer design that maximizes power density and efficiency within the available degrees of freedom while complying with material limits, such as temperature, flux density, and dielectric strength as well as outer dimension limits. This paper presents an optimization routine and its underlying loss and thermal models, which are used to design a 166 kW/20 kHz transformer prototype achieving 99.4% efficiency at a power density of 44 kW/dm3. Extensive measurements are performed on the constructed prototype in order to measure core and winding losses and to investigate the current distribution within the litz wire and the flux sharing between the cores.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Improved analytical modeling of conductive losses in magnetic components
Ferreira, J. A. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285503 · Cited by 629
Inductors and Transformers for Power Electronics
Valchev, V. C., & Van den Bossche, A. (2018) · CRC Press eBooks · doi:10.1201/9781420027280 · Cited by 562
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Dragicevic, T., Vasquez, J. C., Guerrero, J. M., & Skrlec, D. (2014) · IEEE Electrification Magazine · doi:10.1109/mele.2013.2297033 · Cited by 376
Huber, J. E., & Kolar, J. W. (2014) · 2014 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954023 · Cited by 264
Self-citationSimplified design method for litz wire
Sullivan, C. R., & Zhang, R. Y. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803681 · Cited by 197
Solid-State-Transformers: Key Components of Future Traction and Smart Grid Systems
Kolar, J. W., & Ortiz, G. (2014) · The International Power Electronics Conference - ECCE ASIA · Cited by 188
Self-citationLoss modeling of inductive components employed in power electronic systems
Mühlethaler, J., Kolar, J. W., & Ecklebe, A. (2011) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2011.5944652 · Cited by 151
Self-citationOrtiz, G., Uemura, H., Bortis, D., Kolar, J. W., & Apeldoorn, O. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2223215 · Cited by 126
Self-citationThe universal power electronics based distribution transformer, an unified approach
Heinemann, L., & Mauthe, G. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2001.954164 · Cited by 109
Cooling Concepts for High Power Density Magnetic Devices
Biela, J., & Kolar, J. W. (2007) · Power Conversion Conference · doi:10.1109/pccon.2007.372915 · Cited by 74
Self-citationPower electronics for all-electric ships with MVDC power distribution system: An overview
Castellan, S., Menis, R., Tessarolo, A., & Sulligoi, G. (2014) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2014.6844068 · Cited by 47
Smart-grid technologies and progress in Europe and the USA
Simões, M. G., Roche, R., Kyriakides, E., Miraoui, A., Blunier, B., McBee, K. D., Suryanarayanan, S., Nguyen, P. H., & Ribeiro, P. F. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6063795 · Cited by 46
High-Power DC-DC Converter Technologies for Smart Grid and Traction Applications
Ortiz, G. (2014) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010213553 · Cited by 44
Self-citationProposal and validation of medium-frequency power transformer design methodology
Villar, I., Garcia‐Bediaga, A., Viscarret, U., Etxeberria‐Otadui, I., & Rufer, A. C. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064284 · Cited by 41
Protection of MV/LV solid-state transformers in the distribution grid
Guillod, T., Krismer, F., Färber, R., Franck, C. M., & Kolar, J. W. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392648 · Cited by 41
Self-citationHuber, J., Ortiz, G., Krismer, F., Widmer, N., & Kolar, J. W. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520484 · Cited by 38
Self-citationMultiobjective optimal design of high frequency transformers using genetic algorithm
Versèle, C., Deblecker, O., & Lobry, J. (2009) · European Conference on Power Electronics and Applications · Cited by 36
Burkart, R. M., & Kolar, J. W. (2012) · Cited by 18
Self-citationDesign for better thermal management in highpower high-frequency transformers
Pavlovsky, M., de Haan, S. W. H., & Ferreira, J. A. (2005) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2005.1518829 · Cited by 17
Strategies to reduce copper losses in connections of medium-frequency high-current converters
Cougo, B., Kolar, J. W., & Ortiz, G. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119546 · Cited by 7
Self-citationComparative analysis of inductor concepts for high peak load low duty cycle operation
Leibl, M., & Kolar, J. W. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869694 · Cited by 7
Self-citation
Cited by
Applicability of solid-state transformers in today's and future distribution grids
Huber, J. E., & Kolar, J. W. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2738610 · Cited by 506
“This efficiency depends on the selection of an optimum switching frequency [26], and also on the utilization of the active materials, i.”
BackgroundSelf-citation99% Efficient 10 kV SiC-Based 7 kV/400 V DC Transformer for Future Data Centers
Rothmund, D., Guillod, T., Bortis, D., & Kolar, J. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2886139 · Cited by 315
Self-citationArtificial Neural Network (ANN) Based Fast and Accurate Inductor Modeling and Design
Guillod, T., Papamanolis, P., & W. Kolar, J. (2020) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2020.3012777 · Cited by 264
99% Efficient Isolated Three-Phase Matrix-Type DAB Buck–Boost PFC Rectifier
Schrittwieser, L., Leibl, M., & Kolar, J. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2914488 · Cited by 169
Self-citationZhang, Z., Liu, C., Wang, M., Si, Y., Liu, Y., & Lei, Q. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2980313 · Cited by 137
Metadata
- Authors
- Leibl, M., Ortiz, G., & Kolar, J. W.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2017-03
- Volume
- 5
- Issue
- 1
- Pages
- 110-123
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2548244418
- Cited by
- 306
- References
- 24
- FWCI
- 8.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.