Design and Experimental Validation of a Wire-Bond-Less 10-kV SiC MOSFET Power Module
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Wide bandgap (WBG) power devices with voltage ratings exceeding 10 kV have the potential to revolutionize medium- and high-voltage systems due to their high-speed switching and lower ON-state losses. However, the present power module packages are limiting the performance of these unique switches. The objective of this article is to push the boundaries of high-density, high-speed, 10-kV power module packaging. The proposed package addresses the well-known electromagnetic and thermal challenges, as well as the more recent and prominent electrostatic and electromagnetic interference (EMI) issues associated with high-speed, 10-kV devices. The module achieves low and balanced parasitic inductances, resulting in a record switching speed of 250 V/ns with negligible ringing and voltage overshoot. An integrated screen reduces the common-mode (CM) current that is generated by these fast voltage transients by ten times. This screen connection simultaneously increases the partial discharge inception voltage (PDIV) by more than 50%. A compact, medium-voltage termination and system interface design is also proposed in this article. With the integrated jet-impingement cooler, the power module prototype achieves a power density of 4 W/mm3. This article presents the design, prototyping, and testing of this optimized package for 10-kV SiC MOSFETs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 2×
“one of the most promising for medium and high-voltage applications [2], [3], [7].”
BackgroundPower Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478
Madhusoodhanan, S., Tripathi, A., Patel, D., Mainali, K., Kadavelugu, A., Hazra, S., Bhattacharya, S., & Hatua, K. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2412096 · Cited by 371 · cited 4×
“design [33]–[36], and converter evaluation [22], [32], [37].”
BackgroundInfluential15 kV SiC MOSFET: An Enabling Technology for Medium Voltage Solid State Transformers
FREEDM Systems Center, N. C. S. U., & Huang, A. Q. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00012 · Cited by 182 · cited 1×
“8 kV) grid [17], fast charging stations [25], HVDC [26], flexible ac transmission systems (FACTS) [27], [28], and transformer-less intelligent power substations [17], [22], [29]–[31].”
BackgroundWu, R., Smirnova, L., Wang, H., Iannuzzo, F., & Blaabjerg, F. (2015) · 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2015.7167881 · Cited by 47 · cited 2×
“It has been shown for a commercial silicon IGBT module that the current overshoots for each of the paralleled die can vary by more than two times [39], [40].”
BackgroundA study on performance degradation of SiC MOSFET for burn-in test of body diode
Funaki, T. (2013) · 2013 4th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2013.6785593 · Cited by 18 · cited 1×
“In the past, conduction of the body diode of highvoltage SiC MOSFETs was avoided because it led to the propagation of stacking faults, which degraded the device performance [80],[81].”
Background
Cited by
A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151
“These cause high-density packaging development to be difficult [146].”
BackgroundMocevic, S., Yu, J., Fan, B., Sun, K., Xu, Y., Stewart, J., Rong, Y., Song, H., Mitrovic, V., Yan, N., et al. (2022) · iEnergy · doi:10.23919/ien.2022.0001 · Cited by 88
Self-citationA Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters
Li, B., Yang, X., Wang, K., Zhu, H., Wang, L., & Chen, W. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3092367 · Cited by 79
Metadata
- Authors
- DiMarino, C., Mouawad, B., Johnson, C. M., Wang, M., Tan, Y.-S., Lu, G.-Q., Boroyevich, D., & Burgos, R.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 381-394
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2975353853
- Cited by
- 101
- References
- 6
- FWCI
- 3.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design and Experimental Validation of a Wire-Bond-Less 10-kV SiC MOSFET Power Module. https://app.cochat.ai/papers/10.1109/jestpe.2019.2944138
- The paper
- DiMarino, C., Mouawad, B., Johnson, C. M., Wang, M., Tan, Y.-S., Lu, G.-Q., Boroyevich, D., & Burgos, R. (2020). Design and Experimental Validation of a Wire-Bond-Less 10-kV SiC MOSFET Power Module. IEEE Journal of Emerging and Selected Topics in Power Electronics. https://doi.org/10.1109/jestpe.2019.2944138
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.