The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
A Circuits and Systems Perspective of Organic/Printed Electronics: Review, Challenges, and Contemporary and Emerging Design Approaches
Abstract
The often touted attractive attributes of printed/organic electronics are its mechanically flexible form-factor, low-cost, green, on-demand printing, scalability, low-power operation, and intelligence (signal processing) - ideally, the creation of intelligent lightweight electronics printed by simple ubiquitous printing processes, and integrated into new ways to exploit its mechanically flexible form-factor. Printed/Organic Electronics, now an industry on its own right and recognized as one of the key technological enablers for the Internet of Things, is largely complementary to silicon because the printed transistors are slow and the printed elements are large. The sanguine projected growth of the $29 B market today to $73 B by 2027 assumes that `intelligence' (analog, mixed-signal and digital signal processing) would be realizable. Nevertheless, many of the said attributes of printed/organic electronics remain a challenge. In this paper, we exemplify this with a comprehensive and critical review and tabulation of the state-of-the art printed digital, analog, and mixed-signal circuits. We further review the application space of printed/organic electronics and the supply chain, including their classifications and delineate the associated challenges in each constituent chain. These challenges, largely unresolved, are indeed formidable, and are discussed with a critical circuits and systems perspective. Our review depicts that contemporary design philosophies and methodologies for silicon are largely inadequate for printed/organic electronics. To this end, we discuss esoteric analog and digital design philosophies and methodologies, with emphasis on co-design and co-optimization between the different constituent supply chains that may potentially circumvent the said formidable challenges, and discuss the associated penalties thereto.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Self-citationAn ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
(1965) · Vacuum · doi:10.1016/0042-207x(65)91016-x · Cited by 1,713
Ultralow-power organic complementary circuits
Klauk, H., Zschieschang, U., Pflaum, J., & Halik, M. (2007) · Nature · doi:10.1038/nature05533 · Cited by 1,398
Flexible organic transistors and circuits with extreme bending stability
Sekitani, T., Zschieschang, U., Klauk, H., & Someya, T. (2010) · Nature Materials · doi:10.1038/nmat2896 · Cited by 1,253
Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates
Cao, Q., Kim, H.-S., Pimparkar, N., Kulkarni, J. P., Wang, C., Shim, M., Roy, K., Alam, M. A., & Rogers, J. A. (2008) · Nature · doi:10.1038/nature07110 · Cited by 1,136
A skin-inspired organic digital mechanoreceptor
Tee, B. C.-K., Chortos, A., Berndt, A., Nguyen, A. K., Tom, A., McGuire, A., Lin, Z. C., Tien, K., Bae, W.-G., Wang, H., et al. (2015) · Science · doi:10.1126/science.aaa9306 · Cited by 882
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Flexible high-performance carbon nanotube integrated circuits
Sun, D.-M., Timmermans, M. Y., Tian, Y., Nasibulin, A. G., Kauppinen, E. I., Kishimoto, S., Mizutani, T., & Ohno, Y. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.1 · Cited by 755
A 13.56-MHz RFID System Based on Organic Transponders
Cantatore, E., Geuns, T. C. T., Gelinck, G. H., van Veenendaal, E., Gruijthuijsen, A. F. A., Schrijnemakers, L., Drews, S., & de Leeuw, D. M. (2007) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2006.886556 · Cited by 504
All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
Jung, M., Kim, J., Noh, J., Lim, N., Lim, C., Lee, G., Kim, J., Kang, H., Jung, K., Leonard, A. D., et al. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2039541 · Cited by 452
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Lau, P. H., Takei, K., Wang, C., Ju, Y., Kim, J., Yu, Z., Takahashi, T., Cho, G., & Javey, A. (2013) · Nano Letters · doi:10.1021/nl401934a · Cited by 410
Fukuda, K., Takeda, Y., Yoshimura, Y., Shiwaku, R., Tran, L. T., Sekine, T., Mizukami, M., Kumaki, D., & Tokito, S. (2014) · Nature Communications · doi:10.1038/ncomms5147 · Cited by 403
All‐Printed Flexible Organic Transistors Enabled by Surface Tension‐Guided Blade Coating
Pierre, A., Sadeghi, M., Payne, M. M., Facchetti, A., Anthony, J. E., & Arias, A. C. (2014) · Advanced Materials · doi:10.1002/adma.201401520 · Cited by 234
Self-citationAn 8-Bit, 40-Instructions-Per-Second Organic Microprocessor on Plastic Foil
Myny, K., van Veenendaal, E., Gelinck, G. H., Genoe, J., Dehaene, W., & Heremans, P. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2170635 · Cited by 198
All-Inkjet-Printed Organic Thin-Film Transistor Inverter on Flexible Plastic Substrate
Chung, S., Kim, S. O., Kwon, S.-K., Lee, C., & Hong, Y. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2156757 · Cited by 187
Fully printed electronics on flexible substrates: High gain amplifiers and DAC
Chang, J., Zhang, X., Ge, T., & Zhou, J. (2014) · Organic Electronics · doi:10.1016/j.orgel.2013.12.027 · Cited by 174
Self-citationScalable printed electronics: an organic decoder addressing ferroelectric non-volatile memory
Ng, T. N., Schwartz, D. E., Lavery, L. L., Whiting, G. L., Russo, B., Krusor, B. S., Veres, J., Bröms, P., Herlogsson, L., Alam, N., et al. (2012) · Scientific Reports · doi:10.1038/srep00585 · Cited by 128
Yan, H., Zheng, Y. Q., Blache, R., Newman, C., Lu, S., Woerle, J., & Facchetti, A. F. (2008) · Advanced Materials · doi:10.1002/adma.200800629 · Cited by 120
Self-citationMoy, T., Huang, L., Rieutort-Louis, W. S. A., Wu, C., Cuff, P., Wagner, S., Sturm, J. C., & Verma, N. (2016) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2016.2598295 · Cited by 106
Complementary Ring Oscillator Exclusively Prepared by Means of Gravure and Flexographic Printing
Kempa, H., Hambsch, M., Reuter, K., Stanel, M., Schmidt, G. C., Meier, B., & Hübler, A. C. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2153856 · Cited by 87
Chang, I., Park, S. P., & Roy, K. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2036764 · Cited by 86
Noh, J., Jung, M., Jung, Y., Yeom, C., Pyo, M., & Cho, G. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2410303 · Cited by 84
Fukuda, K., Minamiki, T., Minami, T., Watanabe, M., Fukuda, T., Kumaki, D., & Tokito, S. (2015) · Advanced Electronic Materials · doi:10.1002/aelm.201400052 · Cited by 83
A thin-film microprocessor with inkjet print-programmable memory
Myny, K., Smout, S., Rockelé, M., Bhoolokam, A., Ke, T., Steudel, S., Cobb, B., Gulati, A., Rodriguez, F. G., Obata, K., et al. (2014) · Scientific Reports · doi:10.1038/srep07398 · Cited by 80
Fully-printed, all-polymer, bendable and highly transparent complementary logic circuits
Mandal, S., Dell’Erba, G., Luzio, A., Bucella, S. G., Perinot, A., Calloni, A., Berti, G., Bussetti, G., Duò, L., Facchetti, A. F., et al. (2015) · Organic Electronics · doi:10.1016/j.orgel.2015.02.006 · Cited by 78
Self-citationXiong, W., Guo, Y., Zschieschang, U., Klauk, H., & Murmann, B. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2010.2048083 · Cited by 74
Fuketa, H., Yoshioka, K., Shinozuka, Y., Ishida, K., Yokota, T., Matsuhisa, N., Inoue, Y., Sekino, M., Sekitani, T., Takamiya, M., et al. (2014) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2014.2314135 · Cited by 71
Kang, H., Kitsomboonloha, R., Ulmer, K., Stecker, L. H., Grau, G., Jang, J., & Subramanian, V. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.10.005 · Cited by 56
Mechanically Flexible and High-Performance CMOS Logic Circuits
Honda, W., Arie, T., Akita, S., & Takei, K. (2015) · Scientific Reports · doi:10.1038/srep15099 · Cited by 52
Kim, D. I., Hwang, B., Park, J. S., Jeon, H. S., Bae, B. S., Lee, H.-J., & Lee, N. (2012) · Organic Electronics · doi:10.1016/j.orgel.2012.06.038 · Cited by 45
Printed Organic and Inorganic Electronics: Devices To Systems
Sevilla, G. A. T., & Hussain, M. M. (2016) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2016.2619979 · Cited by 43
Bidirectional Communication in an HF Hybrid Organic/Solution-Processed Metal-Oxide RFID Tag
Myny, K., Rockelé, M., Chasin, A. V., Pham, D. V., Steiger, J., Botnaraş, S., Weber, D. J., Herold, B., Ficker, J., van der Putten, B., et al. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2320553 · Cited by 33
A process-insensitive high-performance NMOS operational amplifier
Tsividis, Y., Fraser, D. L., & Dziak, J. E. (1980) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1980.1051498 · Cited by 31
Flexible Hybrid Electronic Circuits and Systems
Schwartz, D. E., Rivnay, J., Whiting, G. L., Mei, P., Zhang, Y., Krusor, B. S., Kor, S., Daniel, G., Ready, S. E., Veres, J., et al. (2016) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2016.2612623 · Cited by 29
Ishida, K., Huang, T.-C. J., Honda, K., Sekitani, T., Nakajima, H., Maeda, H., Takamiya, M., Someya, T., & Sakurai, T. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2170634 · Cited by 24
Special issue on advanced flexible electronics for sensing applications [Scanning the Issue]
Reuss, R. H., Raupp, G. B., & Gnade, B. E. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2414486 · Cited by 23
Self-citationComplementary organic thin film transistor circuits fabricated directly on silicone substrates
Graz, I. M., & Lacour, S. P. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.08.008 · Cited by 21
Printed Electronics: Effects of Bending and a Self-Compensation Means
Jia, Z., Ge, T., & Chang, J. S. (2016) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2616907 · Cited by 8
Self-citation
Cited by
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Khan, Y., Thielens, A., Muin, S., Ting, J., Baumbauer, C., & Arias, A. C. (2020) · Advanced Materials · doi:10.1002/adma.201905279 · Cited by 891
Doping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
Wiklund, J., Karakoç, A., Palko, T., Yiğitler, H., Ruttik, K., Jäntti, R., & Paltakari, J. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5030089 · Cited by 315
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Metadata
- Authors
- Chang, J. S., Facchetti, A. F., & Reuss, R.
- Venue
- IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Published
- 2017-03
- Volume
- 7
- Issue
- 1
- Pages
- 7-26
- ISSN
- 2156-3357 (ISSN-L)
- 2156-3365
- OpenAlex
- W2592328268
- Cited by
- 271
- References
- 39
- FWCI
- 14.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.