The DOI matches its Crossref record; 40 of the 42 references it cites were found in a registry or an index.
Lossy Mode Resonance Generation With Indium-Tin-Oxide-Coated Optical Fibers for Sensing Applications
Open accessAbstract
Surface plasmon resonances and lossy mode resonances (LMRs) can be generated with indium tin oxide (ITO) coated optical fibers. Both phenomena are analyzed and compared. LMRs present important advantages: they do not require a specific polarization of light, it is possible to generate multiple attenuation bands in the transmission spectrum, and the sensitivity of the device to external parameters can be tuned. The key parameter is the thickness of the ITO coating. The study is supported with both theoretical and experimental results. The main purposes are sensing and generation of multiple-wavelength filters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The ITO layer introduced an optical loss of around 0.02 dB/ μ m, resulting from strong free carrier absorption in the infrared. 43”
From A silicon photonics waveguide-coupled colloidal quantum dot photodiode sensitive beyond 1.6 µ m (2024) · cites this paper as [43]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Snyder, A. W., & Love, J. D. (1984) · doi:10.1007/978-1-4613-2813-1 · Cited by 3,780
Turiel, E. (2007) · Wiley eBooks · doi:10.1002/9780470147658.chpsy0313 · Cited by 2,156
Fiber-Optic Chemical Sensors and Biosensors
Wolfbeis, O. S. (2006) · Analytical Chemistry · doi:10.1021/ac060490z · Cited by 1,635
Surface Plasmon Resonance Based Sensors
Homola, J. (2006) · Springer series on chemical sensors and biosensors · doi:10.1007/b100321 · Cited by 1,430
A fiber-optic chemical sensor based on surface plasmon resonance
Jorgenson, R. C., & Yee, S. (1993) · Sensors and Actuators B Chemical · doi:10.1016/0925-4005(93)80021-3 · Cited by 1,244
Chopra, K. L., & Das, S. R. (1983) · Springer eBooks · doi:10.1007/978-1-4899-0418-8 · Cited by 792
Daimon, M., & Masumura, A. (2007) · Applied Optics · doi:10.1364/ao.46.003811 · Cited by 741
Fiber-Optic Sensing: A Historical Perspective
Culshaw, B., & Kersey, A. D. (2008) · Journal of Lightwave Technology · doi:10.1109/jlt.0082.921915 · Cited by 463
Current status of micro- and nano-structured optical fiber sensors
Lee, B., Roh, S., & Park, J. (2009) · Optical Fiber Technology · doi:10.1016/j.yofte.2009.02.006 · Cited by 377
Fiber-Optic Chemical Sensors and Biosensors
Wolfbeis, O. S. (2004) · Analytical Chemistry · doi:10.1021/ac040049d · Cited by 297
Indium tin oxide (ITO) thin film gas sensor for detection of methanol at room temperature
Patel, N. G., Patel, P. D., & Vaishnav, V. S. (2003) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(03)00524-0 · Cited by 279
Sharma, A. K., & Gupta, B. D. (2004) · Optics Communications · doi:10.1016/j.optcom.2004.10.013 · Cited by 197
Dependence of plasmon polaritons on the thickness of indium tin oxide thin films
Rhodes, C. L., Cerruti, M., Efremenko, A. Y., Losego, M. D., Aspnes, D. E., Maria, J., & Franzen, S. (2008) · Journal of Applied Physics · doi:10.1063/1.2908862 · Cited by 176
Slavı́k, R., Homola, J., & Brynda, E. (2002) · Biosensors and Bioelectronics · doi:10.1016/s0956-5663(02)00013-1 · Cited by 175
Suzuki, H., Sugimoto, M., Matsui, Y., & Kondoh, J. (2008) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2008.01.003 · Cited by 169
Room-temperature deposition of indium tin oxide thin films with plasma ion-assisted evaporation
Laux, S., Kaiser, N., Zoller, A., Goetzelmann, R., Lauth, H., & Bernitzki, H. (1998) · Thin Solid Films · doi:10.1016/s0040-6090(98)00861-x · Cited by 169
New Table of the Refractive Index of Pure Glycerol at 20°C
Hoyt, L. F. (1934) · Industrial & Engineering Chemistry · doi:10.1021/ie50291a023 · Cited by 158
Handbook of display technology
Castellano, J. A. (1992) · Cited by 154
Determination of the optical permittivity and thickness of absorbing films using long range modes
Yang, F., & Sambles, J. R. (1997) · Journal of Modern Optics · doi:10.1080/09500349708230726 · Cited by 127
High quality transparent heat reflectors of reactively evaporated indium tin oxide
Hamberg, I., Hjortsberg, A., & Granqvist, C. (1982) · Applied Physics Letters · doi:10.1063/1.93103 · Cited by 108
Brewer, S. H., & Franzen, S. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp026600x · Cited by 102
Jung, Y. S. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2004.02.047 · Cited by 95
Refractive indices of textured indium tin oxide and zinc oxide thin films
Yang, Y., Sun, X. W., Chen, B. J., Xu, C., Chen, T. P., Sun, C., Tay, B. K., & Sun, Z. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2005.12.265 · Cited by 93
Brewer, S. H., & Franzen, S. (2002) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(02)00217-7 · Cited by 92
Analysis of lossy mode cut-off conditions in planar waveguides with semiconductor guiding layer
Marciniak, M., Grzegorzewski, J., & Szustakowski, M. (1993) · IEE Proceedings J Optoelectronics · doi:10.1049/ip-j.1993.0040 · Cited by 86
Refractive-Index measurements of liquids used in conjunction with optical fibers
Cooper, P. R. (1983) · Applied Optics · doi:10.1364/ao.22.003070 · Cited by 85
Nanodeposition of materials with complex refractive index in long-period fiber gratings
Villar, I. D., Matias, I. R., Arregui, F. J., & Achaerandio, M. (2005) · Journal of Lightwave Technology · doi:10.1109/jlt.2005.858246 · Cited by 81
Self-citationKonry, T., Novoa, A., Cosnier, S., & Marks, R. S. (2003) · Analytical Chemistry · doi:10.1021/ac026444q · Cited by 70
Monochromatic excitation of surface plasmon resonance in an optical-fibre refractive-index sensor
Ronot-Trioli, C., Trouillet, A., Veillas, C., & Gagnaire, H. (1996) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(97)80020-9 · Cited by 69
Indium tin oxide overlayered waveguides for sensor applications
Luff, B. J., Wilkinson, J. S., & Perrone, G. (1997) · Applied Optics · doi:10.1364/ao.36.007066 · Cited by 63
Mode coupling between dielectric and semiconductor planar waveguides
Batchman, T. E., & McWright, G. M. (1982) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.1982.1071578 · Cited by 54
Multimode phenomena in semiconductor-clad dielectric optical waveguide structures
Carson, R. F., & Batchman, T. E. (1990) · Applied Optics · doi:10.1364/ao.29.002769 · Cited by 52
Dwivedi, Y. S., Sharma, A. K., & Gupta, B. D. (2007) · Applied Optics · doi:10.1364/ao.46.004563 · Cited by 51
Salama, O., Herrmann, S., Tziknovsky, A., Piura, B., Meirovich, M., Trakht, I., Reed, B. C., Lobel, L. I., & Marks, R. S. (2006) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2006.07.003 · Cited by 48
Ota, R., Seki, S., Ogawa, M., Nishide, T., Shida, A., Ide, M., & Sawada, Y. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(02)00171-2 · Cited by 47
Broadband Absorption Spectroscopy via Excitation of Lossy Resonance Modes in Thin Films
Razansky, D., Einziger, P. D., & Adam, D. R. (2005) · Physical Review Letters · doi:10.1103/physrevlett.95.018101 · Cited by 39
Physico-chemical studies of indium tin oxide-coated fiber optic biosensors
Konry, T., & Marks, R. S. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.07.049 · Cited by 38
Analytical estimates of the characteristics of surface plasmon resonance fibre-optic sensors
Xu, Y., Jones, N. B., Fothergill, J. C., & Hanning, C. D. (2000) · Journal of Modern Optics · doi:10.1080/09500340008233407 · Cited by 36
Indium tin oxide-coated optical fiber tips for affinity electropolymerization
Marks, R. S., Novoa, A., Konry, T., Krais, R., & Cosnier, S. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00085-1 · Cited by 32
Xu, Y., Cottenden, A. M., & Jones, N. B. (2005) · Optical and Quantum Electronics · doi:10.1007/s11082-005-3026-y · Cited by 21
Flagged first, then by citations
2 of the 42 references couldn’t be matched to a known paper.
Research works printed but not linked: 1
- agrawal, 2001, Nonlinear Fiber Optics, 8
Cited by
Sorted by citations
Optical sensors based on lossy-mode resonances
Villar, I. D., Arregui, F. J., Zamarreño, C. R., Corres, J. M., Bariáin, C., Goicoechea, J., Elosúa, C., Hernáez, M., Rivero, P. J., Socorro-Leranoz, A. B., et al. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.08.126 · Cited by 257
Self-citationDesign rules for lossy mode resonance based sensors
Villar, I. D., Hernáez, M., Zamarreño, C. R., Sánchez, P., Fernández-Valdivielso, C., Arregui, F. J., & Matias, I. R. (2012) · Applied Optics · doi:10.1364/ao.51.004298 · Cited by 205
Self-citationA comprehensive review of lossy mode resonance-based fiber optic sensors
Wang, Q., & Zhao, W. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.07.009 · Cited by 191
Optical fiber pH sensor based on lossy-mode resonances by means of thin polymeric coatings
Zamarreño, C. R., Hernáez, M., Villar, I. D., Matias, I. R., & Arregui, F. J. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.12.037 · Cited by 189
Self-citationOptical methods of antibiotic residues detections: A comprehensive review
Wang, Q., & Zhao, W. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.04.097 · Cited by 181
Metadata
- Authors
- Del Villar, I., Zamarreno, C. R., Hernaez, M., Arregui, F. J., & Matias, I. R.
- Affiliations
- Universidad Pública de Navarra (UPNA) (ES)
- Venue
- Journal of Lightwave Technology
- Published
- 2010-01
- Volume
- 28
- Issue
- 1
- Pages
- 111-117
- ISSN
- 0733-8724 (ISSN-L)
- 1558-2213
- OpenAlex
- W2122941373
- Cited by
- 285
- References
- 42
- Citations by year
- 2026: 10 · 2025: 21 · 2024: 25 · 2023: 25 · 2022: 37 · 2021: 23 · 2020: 18 · 2019: 24 · 2018: 9 · 2017: 6 · 2016: 23 · 2015: 15 · 2014: 13 · 2013: 5 · 2012: 10
- FWCI
- 8.20
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- Journal of Lightwave Technology (publishedVersion)
- Academica-e (Universidad Pública de Navarra) (acceptedVersion)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, other-oa)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Fiber Optic Sensors
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic Crystal and Fiber Optics
- Keywords
- lossy mode resonance, indium tin oxide coating, optical fibers, surface plasmon resonance, optical sensors
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review