The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
1-, 1.5-, and 2-μm Fiber Lasers Q-Switched by a Broadband Few-Layer MoS2 Saturable Absorber
Abstract
We propose and demonstrate 1, 1.5, and 2 μm passively Q-switched fiber lasers by exploiting a few-layer Molybdenum sulfide (MoS2) polymer composite as broadband saturable absorber (SA), respectively. The few-layer MoS2nanosheets are prepared by the liquid-phase exfoliation method, and are composited with polyvinyl alcohol (PVA). The PVA-MoS2film is sandwiched between two fiber ferrules to form the fiber-compatible SA. The few-layer MoS2not only shows good transparency from ultraviolet to mid-infrared spectral region, but also possesses the nonlinear saturable absorption. The modulation depth and saturation optical intensity of the PVA-MoS2film are measured to be 1.6% and 13 MW/cm2at 1566 nm by the balanced twin-detector technique, respectively. By further inserting the filmy PVA-MoS2SA into the cavities of Yb-, Er- and Tm-doped fiber lasers, we achieve stable Q-switching operations at 1.06, 1.56, and 2.03 μm, respectively. The output characteristics of the Q-switched pulses at the three wavelengths have been investigated, respectively. The MoS2-based Q-switching enables the large pulse energy of ~1 μJ with a pulse width of 1.76 μs. This is, to the best of our knowledge, the first demonstration of MoS2-based Q-switched fiber lasers in a wide wavelength range (from 1 to 2 μm). Our results experimentally confirm that the new-type 2-D material, few-layer MoS2, is a promising broadband SA to Q-switch fiber lasers covering all major wavelengths from near- to mid-infrared region.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
High yield exfoliation of two-dimensional chalcogenides using sodium naphthalenide
Zheng, J., Zhang, H., Dong, S., Liu, Y., Tai Nai, C., Suk Shin, H., Young Jeong, H., Liu, B., & Ping Loh, K. (2014) · Nature Communications · doi:10.1038/ncomms3995 · Cited by 787
Cited by
Lu, S. B., Miao, L. L., Guo, Z. N., Qi, X., Zhao, C. J., Zhang, H., Wen, S. C., Tang, D. Y., & Fan, D. Y. (2015) · Optics Express · doi:10.1364/oe.23.011183 · Cited by 693
2D Materials for Optical Modulation: Challenges and Opportunities
Yu, S., Wu, X., Wang, Y., Guo, X., & Tong, L. (2017) · Advanced Materials · doi:10.1002/adma.201606128 · Cited by 553
MXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics
Fu, B., Sun, J., Wang, C., Shang, C., Xu, L., Li, J., & Zhang, H. (2021) · Small · doi:10.1002/smll.202006054 · Cited by 328
Li, J., Luo, H., Zhai, B., Lu, R., Guo, Z., Zhang, H., & Liu, Y. (2016) · Scientific Reports · doi:10.1038/srep30361 · Cited by 310
Woodward, R. I., Howe, R. C. T., Runcorn, T. H., Hu, G., Torrisi, F., Kelleher, E. J. R., & Hasan, T. (2015) · Optics Express · doi:10.1364/oe.23.020051 · Cited by 283
Metadata
- Authors
- Luo, Z., Huang, Y., Zhong, M., Li, Y., Wu, J., Xu, B., Xu, H., Cai, Z., Peng, J., & Weng, J.
- Venue
- Journal of Lightwave Technology
- Published
- 2014-12-15
- Volume
- 32
- Issue
- 24
- Pages
- 4679-4686
- ISSN
- 0733-8724 (ISSN-L)
- 1558-2213
- OpenAlex
- W1993304274
- Cited by
- 346
- References
- 2
- FWCI
- 20.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 1-, 1.5-, and 2-μm Fiber Lasers Q-Switched by a Broadband Few-Layer MoS2 Saturable Absorber. https://app.cochat.ai/papers/10.1109/jlt.2014.2362147
- The paper
- Luo, Z., Huang, Y., Zhong, M., Li, Y., Wu, J., Xu, B., Xu, H., Cai, Z., Peng, J., & Weng, J. (2014). 1-, 1.5-, and 2-μm Fiber Lasers Q-Switched by a Broadband Few-Layer MoS2 Saturable Absorber. Journal of Lightwave Technology. https://doi.org/10.1109/jlt.2014.2362147
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.