The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A microfabricated suspended-tube chemical reactor for thermally efficient fuel processing
Abstract
We present a suspended-tube chemical reactor/heat exchanger for high-temperature fuel processing in micro energy conversion systems, primarily for hydrogen production in portable fuel cell systems. This reactor, designed to thermally isolate a high-temperature reaction zone, consists of four free-standing silicon nitride tubes comprising two independent U-shaped fluidic channels. Portions of the tubes are encased in silicon to enable heat exchange between the fluids in these channels. A thin-film platinum resistor is embedded for localized heating and temperature sensing. This paper describes the design and fabrication process for the MEMS fuel processor. Fluidic testing, thermal characterization up to 825°C, and preparation of catalyst washcoats in the reactor microchannels are discussed. In addition, results from catalytic autothermal butane combustion and ammonia cracking in the reactor are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Silicon and Germanium from 3°K to the Melting Point
Glassbrenner, C. J., & Slack, G. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1058 · Cited by 1,652
Cited by
An overview of hydrogen production technologies
Holladay, J. D., Hu, J., King, D. L., & Wang, Y. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.08.039 · Cited by 3,447
Micro Total Analysis Systems. Recent Developments
Vilkner, T., Janasek, D., & Manz, A. (2004) · Analytical Chemistry · doi:10.1021/ac040063q · Cited by 968
Review of the Decomposition of Ammonia to Generate Hydrogen
Lucentini, I., Garcia, X., Vendrell, X., & Llorca, J. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c00843 · Cited by 687
Review of Developments in Portable Hydrogen Production Using Microreactor Technology
Holladay, J. D., Wang, Y., & Jones, E. (2004) · Chemical Reviews · doi:10.1021/cr020721b · Cited by 412
Atomic-scale electron microscopy at ambient pressure
Creemer, J. F., Helveg, S., Hoveling, G. H., Ullmann, S., Molenbroek, A. M., Sarro, P. M., & Zandbergen, H. W. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.014 · Cited by 338
Metadata
- Authors
- Arana, L. R., Schaevitz, S. B., Franz, A. J., Schmidt, M. A., & Jensen, K. F.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2003-10
- Volume
- 12
- Issue
- 5
- Pages
- 600-612
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2170310298
- Cited by
- 165
- References
- 1
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.