The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Micro Power Generator for Harvesting Low-Frequency and Nonperiodic Vibrations
Abstract
This paper presents a new inertial power generator for scavenging low-frequency nonperiodic vibrations called the Parametric Frequency-Increased Generator (PFIG). The PFIG utilizes three magnetically coupled mechanical structures to initiate high-frequency mechanical oscillations in an electromechanical transducer. The fixed internal displacement and dynamics of the PFIG allow it to operate more effectively than resonant generators when the ambient vibration amplitude is higher than the internal displacement limit of the device. The design, fabrication, and testing of an electromagnetic PFIG are discussed. The developed PFIG can generate a peak power of 163 μW and an average power of 13.6 μW from an input acceleration of 9.8 m/s2at 10 Hz, and it can operate at frequencies up to 65 Hz, giving it an unprecedented operating bandwidth and versatility. The internal volume of the generator is 2.12 cm3(3.75 cm3including the casing). The harvester has a volume figure of merit of 0.068% and a bandwidth figure of merit of 0.375%. These values, although seemingly low, are the highest reported in the literature for a device of this size and operating in the difficult frequency range of ≤ 20 Hz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Electromagnetic generator for harvesting energy from human motion
Saha, C. R., O’Donnell, T., Wang, N., & McCloskey, P. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2008.03.008 · Cited by 608
Cited by
A review of the recent research on vibration energy harvesting via bistable systems
Harne, R. L., & Wang, K. W. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/023001 · Cited by 1,351
High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Z., Zhou, S., Zu, J., & Inman, D. (2018) · Joule · doi:10.1016/j.joule.2018.03.011 · Cited by 1,264
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Bistable vibration energy harvesters: A review
Pellegrini, S. P., Tolou, N., Schenk, M., & Herder, J. L. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12444940 · Cited by 408
Pillatsch, P., Yeatman, E. M., & Holmes, A. S. (2014) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2013.10.003 · Cited by 335
Metadata
- Authors
- Galchev, T., Kim, H., & Najafi, K.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2011
- ISSN
- 1057-7157 (ISSN-L)
- 1941-0158
- OpenAlex
- W2111271808
- Cited by
- 163
- References
- 3
- FWCI
- 28.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Micro Power Generator for Harvesting Low-Frequency and Nonperiodic Vibrations. https://app.cochat.ai/papers/10.1109/jmems.2011.2160045
- The paper
- Galchev, T., Kim, H., & Najafi, K. (2011). Micro Power Generator for Harvesting Low-Frequency and Nonperiodic Vibrations. Journal of Microelectromechanical Systems. https://doi.org/10.1109/jmems.2011.2160045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.